I need handwritten only otherwise skip I'll rate A certain engine work on an air standard dual cycle has a compression ratio of 14 and compressionbegin at 0.6 bar and 120 The maximum pressure is 75 bar. The heat supplied to air at constantpressure is 1/4 of the heat supplied at a constant volume. Find the following:(a) The cycle efficiency,(b) The mean effective pressure in bar.For air take C 0.718 kl/kg. K, C, 1.005 ki/kg. K and R.-287 J/kg. K

Answered: Image /qna-images/answer/ef41e0e5-05d0-41fe-a46e-4381d24c9f73.jpg

A certain engine work on an air standard dual cycle has a compression ratio of 14 and compression begin at 0.6 bar and 120 The maximum pressure is 25 bar. The heat supplied to air at constant pressure is 1/4 of the heat supplied at a constant volume. Find the following: (a) The cycle efficiency, (b) The mean effective pressure in bar. For air take C 0.718 kg K, C 1.005 k/kg. K and R-287 /kg. K

A certain engine work on an air standard dual cycle has a compression ratio of 14 and compression begin at 0.6 bar and 120 The maximum pressure is 25 bar. The heat supplied to air at constant pressure is 1/4 of the heat supplied at a constant volume. Find the following: (a) The cycle efficiency, (b) The mean effective pressure in bar. For air take C 0.718 kg K, C 1.005 k/kg. K and R-287 /kg. K

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A cold air-standard Otto cycle has a compression ratio of 12 and the temperature and pressure at the beginning of the compression process are 520°R and 14.2 lbf/in.2, respectively. The heat addition per unit mass of air is 600 Btu/lb. Assume constant specific heats evaluted at 520°R. Given: max temperature = 4906.6 R, maximum pressure = 1609 lbf/in^2, thermal efficiency = 63% Find the mean effective pressure in lbf/in^2
An SI engine operates on an Otto cycle at 3800 RPM, with maximum cycle temperature andpressure of 3100 K and 7846 kPa. The engine has a compression ratio of 9.8:1, and immediately after combustion there is 0.000622 kg of exhaust gas in eachcylinder.During exhaustblowdown, the average mass flow rate through the single exhaust valve is 0.218 kg/sec. Atthe end of blowdown, cylinder pressure is reduced to exhaust pressure of 101 kPa.Calculate:(a) Temperature in cylinder at end of exhaust blowdown. [K](b) Mass of exhaust gas in cylinder at end of blowdown. [kg](c) Crank angle when exhaust valve opens. [° bBDC]
The compression ratio of a Dual cycle is 12. The temperature and pressure at the beginning of the cycle are 1 bar and 27°C. The maximum pressure of the cycle is limited to 70 bar and heat supplied is limited to 675 kJ/kg of air. Find the thermal efficiency of the cycle. cp = 1.005, cv = 0.718 and γ = 1.4.
An air-standard dual cycle receives air at 250C and 1atmosphere pressure. The compression ratio is 15, and thecut-off ratio is 2.5. During the constant volume heat additionprocess the pressure doubles and the maximumtemperature is 2300K. Determine the heat added in constantvolume process. Find the heat added in the constantpressure process. Find the thermal efficiency.
For an ideal cold air-standard Brayton cycle with a compressor inlet temperature of 300 K and a maximum cycle temperature of 1700 K, use Eq. in the picture to find the compressor pressure ratio that maximizes the net power output per unit mass flow. Assume k = 1.4
At the beginning of compression in an ideal dual combustion cycle, the working fluid is 2 lbs. of air at 14.7 psia and 85 deg. F. The compression ratio is 8.5, The pressure at the end of the constant volume addition of heat is 450 psia and there are added 105 BTU during constant pressure expansion. Find the pressure ratio and percentage clearance. a. 1.31, 13.33% b. 1.53, 12.42 c. 1.53, 13.33% d. 1.31, 12.42%
The pressure and temperature at the beginning of compression of an air-standard Diesel cycle are 90 kPa and 300 K, respectively. At the end of the heat addition, the pressure is 6821 kPa and the temperature is 1950 K. The compression ratio is 23.24 Find the cutoff ratio, thermal efficiency, and mean effective pressure
An air-standard dual cycle has a compression ratio of 8.6 and displacement of Vd = 2.2 L. At the beginning of compression, p1 = 95 kPa, and T1 = 290 K. The heat addition is 4.5 kJ, with one quarter added at constant volume and the rest added at constant pressure. T2 = 670K T3 = 1152K T4 = 2139 K T5 = 1339K FIND: b) the net work of the cycle, in kJ.c) the power developed at 3000 cycles per minute, in kW.d) the thermal efficiency.e) the mean effective pressure, in kPa.
For an ideal Diesel cycle with the overall value of k=1.33, rk=15, rc=2.1, P1=97.9 kPa, find P2 and Pm
An Otto cycle with the air-standard assumptions (cv=0.717 kJ/kg.K and cp/cv=1.4) has a compression ratio of 10. Before the isentropic compression process, the air is at 140 kPa, 15°C, and 590 cm3. The heat transfer to the air per cycle is 1200 kJ/kg. The angular speed of the crankshaft for the four-stroke engine is 2400 revolutions per minute. Determine(a) the thermal (first law) efficiency,(b) the second law efficiency,(c) the net specific power output of the cycle (in kJ/kg)(d) the mean effective pressure (MEP),(e) the horse power (hp) of the engineNote: You must draw P-V and T-s charts and mark processes to have a score
For an ideal Diesel cycle with the overall value of k = 1.22, rk = 15, rc = 2.1, P1 = 97.9 kPa, find (a) P2 and (b) Pm.
An air-standard Diesel cycle has a maximum temperature of 1800 K. At the beginning of compression, p1 = 95 kPa and T4 = 300 K. The mass of air is 12 g. For a compression ratio of 15, determine (a) the net work of the cycle, in KJ. (b) the thermal efficiency. (c) the mean effective pressure, in kPa.