A chiller runs on R-410a as the working fluid. It operates with a condensing temperature of 45 C and an evaporating temperature of 0 C. It is determined to develop 85 kW of refrigeration. Calculate the following: (a)refrigerating effect, (b)flow rate of refrigeration, (c)power required by compressor, (d)coefficient of performance, (e)power per kilowatt of refrigeration, (f)theoretical horsepower input of the compressor

A chiller runs on R-410a as the working fluid. It operates with a condensing temperature of 45 C and an evaporating temperature of 0 C. It is determined to develop 85 kW of refrigeration. Calculate the following: (a)refrigerating effect, (b)flow rate of refrigeration, (c)power required by compressor, (d)coefficient of performance, (e)power per kilowatt of refrigeration, (f)theoretical horsepower input of the compressor

Principles of Heat Transfer (Activate Learning with these NEW titles from Engineering!)

8th Edition

ISBN:9781305387102

Author:Kreith, Frank; Manglik, Raj M.

Publisher:Kreith, Frank; Manglik, Raj M.

Chapter8: Natural Convection

Section: Chapter Questions

Problem 8.46P

See similar textbooks

Similar questions

The operating condition for the single compressor in a household refrigerator is the lowest box temperature, which is typically A. 0F B. -20F C. 20F D. 40F
Why is two-stage compression popular for extra-low-temperature refrigeration systems?
A refrigerating system having a 2-Stage Compression with Flash gas removal and intercooling (without water intercooler) operates under pressure limits of 1200kPa and 30kPa and uses R22 as a refrigerant. If the heat to be rejected by the condenser is equal to 185kJ/s and the COP of the system is 327%, determine the following: a.Total work of Compression in kW b. Individual work of compressor kW c.Refrigerating Effect in TOR d. Mass flowrate in the high-pressure and low-pressure loop of the system in kg/s e. Mass flow rate (kg/s) flowing in the high lower pressure loops of the system
A commercial refrigerator with refrigerant-134a as the working fluid is used to keep the refrigerated space at -35°C by rejecting waste heat to cooling water that enters the condenser at 18°C at a rate of 0.25 kg/s and leaves at 26°C. The refrigerant enters the condenser at 1.2 MPa and 50°C and leaves at the same pressure subcooled by 5°C. If the compressor consumes 3.3 kW of power, determine (a) the mass flow rate of the refrigerant, (b) the refrigeration load, (c) the COP, and (d) the minimum power input to the compressor for the same refrigeration load.
A commercial refrigerator with refrigerant-134a as the working fluid is used to keep the refrigerated space at –35°C by rejecting waste heat to cooling water that enters the condenser at 18°C at a rate of 0.25 kg/s and leaves at 26°C. The refrigerant enters the condenser at 1.2 MPa and 50°C and leaves at the same pressure subcooled by 5°C. If the compressor consumes 3.3 kW of power, determine the mass flow rate of the refrigerant,
A commercial refrigerator with refrigerant-134a as the working fluid is used to keep the refrigerated space at –35°C by rejecting waste heat to cooling water that enters the condenser at 18°C at a rate of 0.25 kg/s and leaves at 26°C. The refrigerant enters the condenser at 1.2 MPa and 50°C and leaves at the same pressure subcooled by 5°C. If the compressor consumes 3.3 kW of power, determine the refrigeration load.
A commercial refrigerator with refrigerant-134a as the working fluid is used to keep the refrigerated space at –35°C by rejecting waste heat to cooling water that enters the condenser at 18°C at a rate of 0.25 kg/s and leaves at 26°C. The refrigerant enters the condenser at 1.2 MPa and 50°C and leaves at the same pressure subcooled by 5°C. If the compressor consumes 3.3 kW of power, determine the COP,
A commercial refrigerator using R-134a as a refrigerant is used to keep the cooled environment at -35 C. The refrigerator releases the waste heat to the cooling water that enters the condenser at 18 C at 0.25 kg / s and leaves the condenser at 26 C. The refrigerant enters the condenser at a pressure of 1.2 MPa and a temperature of 50 ° C, and leaves the condenser at the same pressure, supercooled at 5 ° C. Since the compressor consumes 3.3 kW of power, a) Mass flow rate of the refrigerant, b) Cooling load and COP value c) Calculate the minimum power consumed by the compressor for the same cooling load.
An R-12 refrigeration system using a single compressor serves three evaporators of 50, 30 and 20 tons capacity in parallel to each other with an evaporating temperatures of 0 C(hg = 351.447 KJ/kg), -5 C(hg = 349.321 KJ/kg) and -10 C(hg = 347.134 KJ/kg), respectively. If the condenser is maintained at 40 C(hf = 238.535 KJ/kg), compute the COP of the system. Enthalpy at the end of compression is at 378 KJ/kg.
A commercial refrigerator with refrigerant-134a as the working fluid is used to keep the refrigerated space at -30°C by rejecting waste heat to cooling water that enters the condenser at 20°C at a rate of 0.25 kg/s and leaves at 28°C. The refrigerant enters the condenser at 1.2 MPa and 50°C and leaves at the same pressure subcooled by 5°C. If the Talking PIYATIDA TENURUK compressor consumes 3.7 kW of power, determine (a) the mass flow rate of the refrigerant (b) the refrigeration load (c) the COP (d) the minimum power input to the compressor for the same refrigeration load
A standard vapor compression system produces 20 tons of refrigeration using r-12 while operating between a condenser temperature of 45 deg-C and an evaporator temperature of -25 deg-C. Determine the refrigerating effect per unit of refrigerant, circulation rate in kg/s, power supplied, COP, heat rejected in kW, the volume flow rate in L/s, and temperature at the compressor discharge. Please answer completely.
A refrigerated room is kept at −18◦C by a vapor-compression cycle with R-134a as the refrigerant. Heat is rejected to cooling water that enters the condenser at 14◦C at a rate of 0.35 kg/s and leaves at 22◦C. The refrigerant enters the condenser at 1.2MPa and 50◦C and leaves at the same pressure subcooled by 5◦C. If the compressor consumes 5.5 kW of power, determine (a) the mass flow rate of the refrigerant, (b) the refrigeration load and the COP, (c) the second-law efficiency of the refrigerator and the total exergy destruction in the cycle, and (d) the exergy destruction in the condenser. Take specific heat of water to be 4.18 kJ/kg·◦C.