A circuit is constructed with four resistors,one capacitor, one battery and a switch asshown. The values for the resistors are: R1 =R2 = 21 Q, R3 = 108 Q and R4 = 101 Q. Thecapacitance is C = 59 µF and the batteryvoltage is V = 12 V. The positive terminal ofthe battery is indicated with a + sign.R,VR31) The switch has been open for a long time when at time t = 0, the switchis closed. What is l4(0), the magnitude of the current through the resistorR4 just after the switch is closed?0.086A Submit2) What is Q(0), the charge on the capacitor after the switch has beenclosed for a very long time?332.45µC Submit3) After the switch has been closed for a very long time, it is then opened.What is Q(topen), the charge on the capacitor at a time topen = 674 µsafter the switch was opened?304.275µC Submit+4) What is Ic,max(closed), the current that flows through the capacitorwhose magnitude is maximum during the time when the switch isclosed? A positive value for the current is defined to be in the direction ofthe arrow shown.A Submit5)What is Ic,max(open), the current that flows through the capacitorwhose magnitude is maximum during the time when the switch is open?A positive value for the current is defined to be in the direction of thearrow shown.A Submit

Answered: Image /qna-images/answer/8d7a5ad4-b81b-4514-a75e-352401349e24.jpg

A circuit is constructed with four resistors, one capacitor, one battery and a switch as shown. The values for the resistors are:R1 R, R3 - 21 Ω, R3 -108 Ωand R4-101 Ω. The capacitance is C = 59 µF and the battery voltage is V = 12 V. The positive terminal of the battery is indicated with a + sign. R2 = V %3D %3D %3D Ra ww

A circuit is constructed with four resistors, one capacitor, one battery and a switch as shown. The values for the resistors are:R1 R, R3 - 21 Ω, R3 -108 Ωand R4-101 Ω. The capacitance is C = 59 µF and the battery voltage is V = 12 V. The positive terminal of the battery is indicated with a + sign. R2 = V %3D %3D %3D Ra ww

Physics for Scientists and Engineers, Technology Update (No access codes included)

9th Edition

ISBN:9781305116399

Author:Raymond A. Serway, John W. Jewett

Publisher:Raymond A. Serway, John W. Jewett

Chapter28: Direct-current Circuits

Section: Chapter Questions

Problem 28.3OQ: The terminals of a battery are connected across two resistors in series. The resistances of the...

See similar textbooks

Similar questions

When resistors with different resistances are connected in parallel, which of the following must be the same for each resistor? Choose all correct answers, (a) potential difference (b) current (c) power delivered (d) charge entering each resistor in a given time interval (e) none of those answers
Lightbulb A is marked 25.0 W 120. V, and lightbulb B is marked 100. W 120. V. These labels mean that each lightbulb has its respective power delivered to it when it is connected to a constant 120.-V source. (a) Find the resistance of each lightbulb. (b) During what time interval does 1.00 C pass into lightbulb A? (c) Is this charge different upon its exit versus its entry into the lightbulb? Explain. (d) In what time interval does 1.00 J pass into lightbulb A? (e) By what mechanisms does this energy enter and exit the lightbulb? Explain. (f) Find the cost of running lightbulb A continuously for 30.0 days, assuming the electric company sells its product at 0.110 per kWh.
The- pair of capacitors in Figure P28.63 are fully charged by a 12.0-V battery. The battery is disconnected, and the switch is then closed. Alter 1.00 ms has elapsed, (a) how much charge remains 011 the 3.00-F capacitor? (b) How much charge remains on the 2.00-F capacitor? (c) What is the current in the resistor at this time?
A child’s electronic toy is supplied by three 1.58-V alkaline cells having internal resistances of 0.0200 in series with a 1.53-V carbon-zinc dry cell having a 0.100- internal resistance. The load resistance is 10.0 . (a) Draw a circuit diagram of the toy and its batteries, (b) What current flows? (c) How much power is supplied to the load? (d) What is the internal resistance of the dry cell if it goes bad, resulting in only 0.500 W being supplied to the load?
If the terminals of a battery with zero internal resistance are connected across two identical resistors in series, the total power delivered by the battery is 8.00 W. If the same battery is connected across the same resistors in parallel, what is the total power delivered by the battery? (a) 16.0 W (b) 32.0 W (c) 2.00 W (d) 4.00 W (e) none of those answers
The terminals of a battery are connected across two resistors in series. The resistances of the resistors are not the same. Which of the following statements are correct? Choose all that are correct. (a) The resistor with the smaller resistance carries more current than the other resistor. (b) The resistor with the larger resistance carries less current than the other resistor. (c) The current in each resistor is the same. (d) The potential difference across each resistor is the same. (e) The potential difference is greatest across the resistor closest to the positive terminal.
Electric current I enters a node with three resistors connected in parallel (Fig. CQ18.5). Which one of the following is correct? (a) I1 = I and I2 = I3 = 0. (b) I2 I1 and I2 I3. (c) V1 V2 V3 (d) I1 I2 I3 0. Figure CQ18.5
Figure P18.19 shows a Wheatstone bridge, a circuit used to precisely measure an unknown resistance R by varying Rvar until the ammeter reads zero current and the bridge is said to be balanced. If the bridge is balanced with Rvar = 9.00 , find (a) the value of the unknown resistance Rand (b) the current in the 1.00 resistor. (Hint: With the bridge balanced, the wire through the ammeter can effectively be removed from the circuit, leaving two pairs of resistors in parallel.) Figure Pl8.19
Draw two graphs of charge versus time on a capacitor. Draw one for charging an initially uncharged capacitor in series with a resistor, as in the circuit in Figure 21.38, starting from t = 0. Draw the other for discharging a capacitor through a resistor, as in the circuit in Figure 21.39, starting at t = 0, with an initial charge Q0. Show at least two intervals of t.
A 12.0-V emf automobile battery has a terminal voltage of 16.0 V when being charged by a current of 10.0 A. (a) What is the battery’s internal resistance? (b) What power is dissipated inside the battery? (c) At what rate (in °C/min ) will its temperature increase if its mass is 20.0 kg and it has a specific heat of 0.300 kcal/kg • °C, assuming no heat escapes?
A student makes a homemade resistor from a graphite pencil 5.00 cm long, where the graphite is 0.05 mm indiameter. The resistivity of the graphite is =1.38102/m . The homemade resistor is place inseries with a switch, a 10.00-mF capacitor and a 0.50-V power source, (a) What is the BC time constant of the circuit? (b) What is the potential drop across the pencil 1.00 s after the switch is closed?
Review. Ail aluminum rod has a resistance of 1.23 at 20.0C. Calculate the resistance of the rod at 120C by accounting for the changes in both the resistivity and the dimensions of the rod. The coefficient of linear expansion for aluminum is 2.40 10-6 (C)-1