A closed vessel of 1.2 m3 in capacity contains steam at 3 bar and 0.85 dryness fraction. Steam at 10 bar and 0.96 dryness is supplied to the vessel until the pressure inside the vessel becomes 5 bar. Calculate the weight of steam supplied to the closed vessel and the final dryness fraction of the steam in the vessel. Neglect thermal capacity of the vessel.

A closed vessel of 1.2 m3 in capacity contains steam at 3 bar and 0.85 dryness fraction. Steam at 10 bar and 0.96 dryness is supplied to the vessel until the pressure inside the vessel becomes 5 bar. Calculate the weight of steam supplied to the closed vessel and the final dryness fraction of the steam in the vessel. Neglect thermal capacity of the vessel.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

In a gasoline engine, the cylinder conditions are 1.2 MPa and 450°C before the combustion and 1900°C after it. Determine the pressure at the end of the combustion process
Q1 / (0.2562m3) of saturated vapor at (2MPa). The ratio of dryness (0.9) expands the polytropia relationship (= Pv1.25) to (7bar). Calculate: According to V1-1 ms, 2- 02, Q 12, W 12, 2012 -3 X2 4- Find the final state of steam
The compression factor for low molecular-weight, real gases at very low pressure is,
A prototype boiler that contains 5 kg of saturated steam at a pressure of 482.5kPa. Determine the amount of heat which must be rejected in order to reduce the quality to 60%. (a) What will be the pressure and temperature of the steam at this new state? Compute for the (b) heat, (c) internal energy, (d) entropy, and (e) enthalpy at this new state. Note: Consider a constant pressure process. Please show solution for the interpolation.
A steel casting weighing 2 kg has an initial temperature of 500oC; 40 kg of water initiallyat 25oC is contained in a perfectly insulated steel tank weighing 5 kg. The casting isimmersed in the water and the system is allowed to come to equilibrium. What is its finaltemperature? Ignore effects of expansion or contraction, and assume constant specific heatsof 4.18 kJ/kg.oC for water and 0.5 kJ/kg.oC for steel.
Air is compressed isentropically (PV^1.4 = c) to twice its pressure. If the initial temperature is 300K, determine the change in specific
One cubic meter of oxygen at initial pressure of 1 bar and a temperature of17°C are compressed isentropically to a volume of 0.50m 3 . Use the specificheat at constant volume and pressure are 0.919 kJ/kgK and 0.659 kJ/kgK,respectively. determine the following: c. change in internal energy, change in enthalpy and change in entropyd. work nonflow and heat transferred
At 645.3 kPa and 151.2°C, steam leaves an industrial boiler. When the calorimeter pressure reaches 104.3 kPa, a part of the steam is fed through a throttling calorimeter and expelled to the atmosphere. If the steam temperature at the calorimeter is 113.8°C, a. how much moisture is exiting the boiler container? b. If the mass of the saturated liquid is 15 kg, calculate the mass of the saturated vapor. @ 645.3 kPa and 151.2°C: hf = 624.56 kJ/kg hfg = 2123.3 kJ/kg @ 104.3 kPa and 113.8°C: h2 = 2506.7 kJ/kg
Please indicate the given. Determine the optimal intermediate pressures and work needed per kilogram of gas for a three-stage compressor that must compress air between 120 kN/m2 and 288 K to 3800 kN/m2. It's likely that the compression is adiabatic, and that interstage cooling is being used to cool the air back to its initial temperature.
Question: 10 cubic meters of air at 300 psia and 400 deg F is cooled to 140 deg F at constant volume. What are the A) Final Pressure, B) The Work C) the Change in Internal Energy, D) the Heat transferred, E) the Change in Enthalpy, and the F) change of entropy?
Saturated liquid water at 5 bar is heated until it is superheated steam at 30 bar and 650ºC. What is the temperature change? What is the colume change? What is the enthalpy change?
If 0.45 kg of steam at 101.3 Kpa and 63% quality is heated isentropically ,at approximately what pressure will it reached the saturated vapor state?