A conducting rod of length = 65.0 cm is free to slide on two parallel conducting bars as shown in the figure below. Two resistors R1 = 6.00 Q and R2 = 9.00 Q are connected across the ends of the bars to form a loop. A constant magnetic field B = 10.0 T is directed perpendicularly into the page. An external agent pulls the rod to the left with a constant speed of v = 4.00 m/s. a) What is the magnitude and direction (positive terminal upward or positive terminal downward) of the emf induced in the moving rod? Think about which direction current will flow on the rod and remember current flows out of the positive end of a battery. b) Calculate the magnitude and direction (upward or downward) of the induced currents through each of two the resistors. c) Calculate the total power delivered to the resistors in the circuit. d) What is the magnitude of the external force required to keep the bar moving to the left at the constant speed of 4.00 m/s?

A conducting rod of length = 65.0 cm is free to slide on two parallel conducting bars as shown in the figure below. Two resistors R1 = 6.00 Q and R2 = 9.00 Q are connected across the ends of the bars to form a loop. A constant magnetic field B = 10.0 T is directed perpendicularly into the page. An external agent pulls the rod to the left with a constant speed of v = 4.00 m/s. a) What is the magnitude and direction (positive terminal upward or positive terminal downward) of the emf induced in the moving rod? Think about which direction current will flow on the rod and remember current flows out of the positive end of a battery. b) Calculate the magnitude and direction (upward or downward) of the induced currents through each of two the resistors. c) Calculate the total power delivered to the resistors in the circuit. d) What is the magnitude of the external force required to keep the bar moving to the left at the constant speed of 4.00 m/s?

College Physics

10th Edition

ISBN:9781285737027

Author:Raymond A. Serway, Chris Vuille

Publisher:Raymond A. Serway, Chris Vuille

Chapter20: Induced Voltages And Inductance

Section: Chapter Questions

Problem 65AP: In Figure P20.65 the rolling axle of length 1.50 m is pushed along horizontal rails at a constant...

See similar textbooks

Similar questions

In Figure P20.65 the rolling axle of length 1.50 m is pushed along horizontal rails at a constant speed v = 3.00 m/s. A resist or R = 0.400 is connected to the rails at points a and b, directly opposite each other. (The wheels make good electrical contact with the rails, so the axle, rails, and R form a closed-loop circuit. The only significant resistance in the circuit is R.) A uniform magnetic field B = 0.800 T is directed vertically downward. (a) Find the induced current I in the resistor. (b) What horizontal force F is required to keep the axle rolling at constant speed? (c) Which end of the resistor, a or b. is at the higher electric potential? (d) Alter the axle rolls past the resistor, does the current in R reverse direction? Explain your answer. Figure P20.65
A magnetic field directed into the page changes with time according to B = 0.030 0t2 + 1.40, where B is in teslas and t is in seconds. The field has a circular cross section of radius R = 2.50 cm (see Fig. P23.28). When t = 3.00 s and r2 = 0.020 0 m, what are (a) the magnitude and (b) the direction of the electric field at point P2?
An election moves through a uniform electric field E = (2.50i + 5.00j) V/m and a uniform magnetic field B = 0.400k T. Determine the acceleration of the electron when it has a velocity v = 10.0i m/s.
Review. A rod of mass 0.720 kg and radius 6.00 cm rests on two parallel rails (Fig. P28.23) that are d = 12.0 cm apart and L = 45.0 cm long. The rod carries a current of I = 48.0 A in the direction shown and rolls along the rails without slipping. A uniform magnetic field of magnitude 0.240 T is directed perpendicular to the rod and the rails. If it starts from rest, what is the speed of the rod as it leaves the rails? Figure P28.23 Problems 23 and 24.
Assume the region to the right of a certain plane contains a uniform magnetic field of magnitude 1.00 mT and the field is zero in the region to the left of the plane as shown in Figure P22.71. An electron, originally traveling perpendicular to the boundary plane, passes into the region of the field. (a) Determine the time interval required for the electron to leave the field-filled region, noting that the electrons path is a semicircle. (b) Assuming the maximum depth of penetration into the field is 2.00 cm, find the kinetic energy of the electron.
Within the green dashed circle show in Figure P30.21, the magnetic field changes with time according to the expression B = 2.00t3 4.00t2 + 0.800, where B is in teslas, t is in seconds, and R = 2.50 cm. When t = 2.00 s, calculate (a) the magnitude and (b) the direction of the force exerted on an electron located at point P, which is at a distance r = 5.00 cm from the center of the circular field region. (c) At what instant is this force equal to zero? Figure P30.21
How many turns must be wound on a flat, circular coil of radius 20 cm in order to produce a magnetic field of magnitude 4.0105 T at the center of the coil when the current through it is 0.85 A?
Solenoid A has length L and N turns, solenoid B has length 2L and N turns, and solenoid C has length L/2 and 2N turns. If each solenoid carries the same current, rank the magnitudes of the magnetic fields in the centers of the solenoids from largest to smallest.
Two long coaxial copper tubes, each of length L, are connected to a battery of voltage V. The inner tube has inner radius o and outer radius b, and the outer tube has inner radius c and outer radius d. The tubes are then disconnected from the battery and rotated in the same direction at angular speed of radians per second about their common axis. Find the magnetic field (a) at a point inside the space enclosed by the inner tube r d. (Hint: Hunk of copper tubes as a capacitor and find the charge density based on the voltage applied, Q=VC, C=20LIn(c/b) .)
A thin copper rod 1.00 m long has a mass of 50.0 g. What is the minimum current in the rod that would allow it to levitate above the ground in a magnetic field of magnitude 0.100 T? (a) 1.20 A (b) 2.40 A (c) 4.90 A (d) 9.80 A (e) none of those answers
A solenoid is 40 cm long, has a diameter of 3.0 cm, and is wound with 500 turns. If the current through the windings is 4.0 A, what is the magnetic field at a point on the axis of the solenoid that is (a) at the center of the solenoid, (b) 10.0 cm from one end of the solenoid, and (c) 5.0 cm from one end of the solenoid? (d) Compare these answers with the infinite-solenoid case.
A long, straight wire going through the origin is carrying a current of 3.00 A in the positive z-direction (Fig. P19.44). At a point a distance r = 1.20 m from the origin on the positive x-axis, find the (a) magnitude and (b) direction of the magnetic field. At a point the same distance from the origin on the negative y-axis, find the (c) magnitude and (d) direction of the magnetic field. Figure P19.44