A cylinder with a mass 0.222 kg is sliding downwards through a vertically positioned pipe. A thinoil layer exists between the cylinder and the pipe's internal surface. Centerline of the cylinder andthe pipe overlap. (yoil =8044.2 N /m3 ; voil=6-106 m²/s). Find the change in the speed of cylinder inthe pipe with respect to its unit displacement and the shear stress that acts upon the oil layer.AAL = 128 mmVW73.8 mm74 mm0.1 mmFigure 1

m=0.222 kgγoil=8044.2 N/m3voil=6×10-6 m2/L=128 mm

A cylinder with a mass 0.222 kg is sliding downwards through a vertically positioned pipe. A thin oil layer exists between the cylinder and the pipe's internal surface. Centerline of the cylinder and the pipe overlap. (Yol =8044.2 N /m³; Vol=6-10° m²/s). Find the change in the speed of cylinder in the pipe with respect to its unit displacement and the shear stress that acts upon the oil layer. A A L = 128 mm W 73.8 mm

A cylinder with a mass 0.222 kg is sliding downwards through a vertically positioned pipe. A thin oil layer exists between the cylinder and the pipe's internal surface. Centerline of the cylinder and the pipe overlap. (Yol =8044.2 N /m³; Vol=6-10° m²/s). Find the change in the speed of cylinder in the pipe with respect to its unit displacement and the shear stress that acts upon the oil layer. A A L = 128 mm W 73.8 mm

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A vertical pipe of 1 m diameter and 20 m length has a pressure head of 5 m of oil at the upper end. When oil flows through the pipe at an average velocity of 4.5 m/s, the head loss due to friction is 1.6 m of oil. The density of oil is 880 kg/m3 Find the pressure at the lower end of the pipe, when the oil flow is (a) upward direction, (b) downward and also draw the neat sketch. i) Pressure at lower end when flow of oil is upward =________________ N/m2 ii) Pressure at lower end when flow of oil is downward =________________ N/m2
A pipe of diameter 10cm conveying 200 liters/s of water has bend of angle (θ = 90⁰) and θ = 0⁰ through horizontal plane. Find theresultant force exerted on the bend if the pressure at the inlet and outlet of the bend are 15N/cm2 and 10 N/cm2respectively
The bottom quarter of a vertical cylindrical tank of total height 0.4 m and diameter 0.3 m is filled with a liquid (SG > 1, like glycerin) and the rest with water, as shown in the figure. The tank is now rotated about its vertical axis at a constant angular speed of ω. Determine (a) the value of the angular speed when the point P on the axis at the liquid-liquid interface touches the bottom of the tank and (b) the amount of water that would be spilled out at this angular speed.
The power 395 W is required to transmit 5 x 10-3 m3/s of water. Find the loss of head due to friction in a pipe. The head loss due to friction (in m of water) Answer
Piston A has a cross-section of 1,200 cm^2 while that of piston B is 950 cm^2 with the latter higher than piston A by 1.75 m. If the intervening passages are filled with oil (s= 0.8), what is the difference in pressure between A and B?
The U-tube shown in the figure is subjected to an acceleration of a (m/s2) to left. If the difference between the free surfaces is ∆h = 20 cm and h = 0.4 m, calculate the acceleration.
How long should a rotor blade of a wind turbine be if it is designed to produce 10 kW and the prevailing wind speed is about 50 kph? Assume that air density is 1.20 kg/m3.
Flood in irrigation areasto block and return the water to the river or wateras below to guide your bedThe flat cover system provided is preferred. Of coverits weight is 871 kg. Square section cover, coverhinged 1 m above center (a = 0.25 m)and b = 150 cm. Cover vertically 4 °has angle. According to the givenWhat is the maximum water head (h) for not openingshould be up. (ρ water = 1000 kg / m3)
Some non-Newtonian fluids behave as a Bingham plastic for which shear stress can be expresses as τ = τy + μ(du/dr). For flow of a Bingham plastic in a horizontal pipe of radius R, the velocity profile is given as u(r) = (ΔP/4μL)(r2-R2) + (τy / μ)(r – R), where ΔP/L is the constant pressure drop along the pipe per unit length and r is the radial distance from the centerline. Determine (a) the wall shear stress and (b) the drag force acting on a pipe section of length L.
As given in the figure, a cylindrical 125 cm high and 89 cm diameter The inside of the tank is initially completely filled with oil. Then, a 1.25cm diameter hole is drilled on the bottom edge of the tank and the oil begins to drain from this hole. Oil outlet speed 2gh given as. (h is the variable height of the oil in the tank from the hole center and g is the acceleration of gravity). From the bottom of the oil level in the tank Calculate the time it takes to fall to a height of 15 cm as [s].
1.A) A fluid of density ρ=850 kg/m3 and viscosity µ=0,8 Pa s is completely filling the spacing h= 2 cm between two parallel horizontal plates of length 2,5 m and width 1 m . The upper plate is pulled at a speed of U while lower plate is fixed . In order to generate a laminar steady incompressible flow of fluid in the spacing at a rate of 0,85 kg/s determine total shearing force in the field.ANSWER:10 N 1.B) A fluid of density ρ=850 kg/m3 and viscosity µ=0,8 Pa s is completely filling the spacing h= 2 cm between two parallel horizontal plates of length 2,5 m and width 1 m . The upper plate is pulled at a speed of U while lower plate is fixed . In order to generate a laminar steady incompressible flow of fluid in the spacing at a rate of 0,85 kg/s determine Reynolds Number of flow using the spacing as the characteristic dimension.ANSWER: 2,125 1.C) A fluid of density ρ=850 kg/m3 and viscosity µ=0,8 Pa s is completely filling the spacing h= 2 cm between two parallel horizontal plates of…
The water level in the 1.8 m high and 1 m diameter cylindrical tank in the figure is 1.4 m. If this tank is rotated around its own axis at what speed will the axial depth be zero? (In other words, what is the number of revolutions at which a dry area will begin to form at the bottom of the tank?) Take the gravitational acceleration as 10 m / s2 and π as 3.