A disk, initially rotating at 137 rad/s, is slowed down with a constant angular acceleration of magnitude 4.99 rad/s. (a) How much timedoes the disk take to stop? (b) Through what angle (rad) does the disk rotate during that time?(a) NumberUnits(b) NumberUnits

Initial angular velocity ωi = 137 rad/sec final angular velocity ωf= 0 rad/sec angular acceleration…

A disk, initially rotating at 137 rad/s, is slowed down with a constant angular acceleration of magnitude 4.99 rad/s?. (a) H does the disk take to stop? (b) Through what angle (rad) does the disk rotate during that time? (a) Number Units (b) Number Units

A disk, initially rotating at 137 rad/s, is slowed down with a constant angular acceleration of magnitude 4.99 rad/s?. (a) H does the disk take to stop? (b) Through what angle (rad) does the disk rotate during that time? (a) Number Units (b) Number Units

Physics for Scientists and Engineers: Foundations and Connections

1st Edition

ISBN:9781133939146

Author:Katz, Debora M.

Publisher:Katz, Debora M.

Chapter12: Rotation I: Kinematics And Dynamics

Section: Chapter Questions

Problem 69PQ: The propeller of an aircraft accelerates from rest with an angular acceleration = 4t + 6, where is...

See similar textbooks

Related questions

Q: 2. A cylindrical tank with a diameter of 1.5 meters contains a fluid with specific gravity of 9.0. t...

Q: Identify the exponential relationship from the list below: Select one: O a z=(100+2)e4t Ob. z =(100+...

A: The numerical value of 'e' is e = 2.71828 An equation becomes an exponential equation if there is a ...

Q: A race car travels in a circular track of radius 150 m. If the car moves with a constant speed of 90...

Q: A magnifying glass has a converging lens of focal length 1.6 cm. At what distance from a nickel shou...

Q: The angular acceleration of a wheel is a - 8.0t4 - 4.0t?, with a in radians per second-squared and t...

Q: A 2.5 F air capacitor is connected to a 6.0 V battery. (a) What is the charge acquired by the capaci...

A: Given, Capacitance of the capacitor=2.5f Voltage of the capacitor=6v

Q: . A 10pC/m infinite line charge is located at x-1, y=0. Determine the electric field at point P(0,0,...

Q: It takes 160 V to store 0.0000000574 C of charge in a certain capacitor. a) How much potential ene...

Q: A block of mass 12.0kg is attached to a horizontal spring. The coefficient of kinetic friction for t...

A: The force in the compressed spring should be equal to the force causing the acceleration and the fri...

Q: Show that the speed v of compressionai sound waves in a gas is independent of the pressure P of the ...

A: Givenv=speed of compressional sound wave in gasP= pressure of Gas T=absolute temperature v=γ R TM

Q: A 43 kg block of Ice slides down a frictionless incline 1.5 m long and 0.78 m high. A worker pushes ...

A: mass of block = 43 kg Length of incline (L) = 1.5 m Height (h) = 0.78 m

Q: A 1.9-m-long gold wire that is 0.50 mm in diameter? Express your answer in ohms. ? Submit Previous A...

Q: A force of 600 Newtons acts on a ball for 1.5 seconds after being hit by a volleyball player. If the...

A: Given Force acts on ball , F = 600 N Time , t = 1.5 second s Mass of ball , m = 275 gm = 275×10-3...

Q: A ball is thrown vertically upward with an initial velocity of 3 m/s from a top of a tall building. ...

A: Part a) The height can be found using the equation of motion v2-u2 = 2as Here u = 3 m/s , a = -g , v...

Q: The figure shows three 0.0127 kg particles that have been glued to a rod of length L=6.46 cm and neg...

A: Given, Length of the rod=6.46m Mass=0.0127kg

Q: C. A box pulled from a table with a force inclined at a certain angle with respect to the surface óf...

Q: What is the capacitance of a pair of circular plates with a radius of 8.0 cm separated by 3.1 mm of ...

A: Given Radius of plates r = 8 cm = 8 × 10-2 m Separation d = 3.1 mm = 3.1 × 10-3 m Dielectric constan...

Q: A) An electric field due to a positive charge is represented by the diagram below. Five points A, B,...

Q: A drag racing car starts from rest at t = 0 and moves along a straight line with velocity given by v...

A: A drag car Start from rest at t=0 and moves along a straight line with velocity given by v=bt² We ha...

Q: A roller coaster of mass 80.0 kg is moving with a speed of 20.0 m/s at position A as shown in the fi...

Q: ow there is a 0.650 kg box at rest, suspended vertically from a light string with a ear mass density...

A: Given Mass hanging m = 0.65 kg Tension in the string T= mg = 0.65 × 9.8 = 6.37 N Linear mass density...

Q: A luge and its rider, with a total mass of 68.0 kg, emerge from a downhill track onto a horizontal s...

A: As per the guidelines of bartleby, we're allowed to solve only a maximum of 3 sub parts of a questio...

Q: Harvey, a harpist, plucks a 0.600 m long string on his harp. The string has a first overtone of 1046...

Q: A wrench 30 cm long is attached to a nut and bolt. You exert a 15 N force on the wrench. What is t...

Q: A physics student walks 1 km east, then 1 km north, then 1 km west, and finally 1 km south. What tot...

A: Answer:- 4 km Given Distance travelled (S1) = 1 km east Distance travelled (S2) = 1 km North Dis...

Q: A = 34 m, B = 34 m, and the magnitude of A + B = 48, which of the following is true?

Q: A 2.00-kg object traveling east at 20.0 m/s collides with a 3.00-kg object traveling west at 10.0 m/...

A: We first equate the linear momentum before and after the collision. ∑pi = ∑pf The momentum of an obj...

Q: A drag racing car starts from rest at t = 0 and moves along a straight line with velocity given by v...

Q: What is the total flux enclosed by a cylinder whose radius is 1, 0<øs and -1szs2 given the flux dens...

A: Flux density is the flux per unit area

Q: Suppose a rocket is at an elevation of 100 km and has an initial velocity of 1.00 x 10^4 m/s directe...

A: Given:initial velocity u = 1*104 m/s initial height h = 100 km = 1*105 m

Q: Your answer is partially correct. A meter stick balances horizontally on a knife-edge at the 50.0 cm...

Q: 15-34 What is the temperature inside an ideal refrigerator-freezer that operates with a COP = 7.0in ...

A: Given, Cop=7.0 22degree celcius room

Q: 4. Kim drives her empty dump truck over a berm (also called a speed bump) at the construction site. ...

Q: Consider an insulating sphere of radius 10 centimetors. A charge of 5 millicoulombs is distributed u...

Q: How far is the player from his starting point?

A: Simple vector addition rule and basic trigonometry is used here.You can easily solve the problem usi...

Q: Consider a silicon pn junction at T = 300 K with an acceptor doping concentration (1 × 1018cm-3) and...

A: Given, Na=10^18/cm³ Nd=10^18/cm³ ni=1.5×10^10/cm³ KT/q=26mV

Q: Suppose a coil of a book, as shown in figure below, and this book is lying on a table. The yertical ...

Q: 6. Five hundred kg. of water flow from a tank every 12 minutes. What is the mass flow rate in: a. kg...

A: GivenMass of water flow ,m=500 kgin Time ,t=12 minutes

Q: OF 3. 129 °C =

Q: 1. Compute for the force between the charges 10µC and -12µC that is 150 cm apart. 2. What is the for...

Q: A coln slides over a frictionless plane and across an xy coordinate system from the origin to a poin...

Q: Four resistances of 10 ohms, 4 ohms, 6 ohms and 5 ohms are connected in series. They are connected t...

A: Given : R1= 10 Ω R2= 4 Ω R3= 6 Ω R4= 5 Ω Potential difference (V)= 75 V

Q: What is the magnitude of an upward electric field in which the electric force on a proton is equal i...

Q: Point charges of + 12 x 10 ^- 6 C and - 24 x 10 ^ - 6 C are 20 cm apart in air. At what point betwee...

A: We have two charges q1=12*10-6 and q2=-24*10-6 which are at a distance r=20 cm from each other. Let ...

Q: Two equal charges, +9.19 nC each, are located on the x-axis at x= 0 and x= 2.16 m, respectively. Wha...

A: Given data :- Charge q1 = +9.19 nC , x1 = 0 mCharge q2 = +9.19 nC , x2 = 2.16 mE at x = 1.09 m due...

Q: 4. A certain amount of excess charge is transferred a conducting sphere with a diameter of 30 cm suc...

A: Given Diameter = 30 cm Radius of sphere R = 30/2 = 15 cm =0.15 m Electric potential at centre V = 2....

Q: Given that m = 19 kg and 0 = 51, solve T2. Note: Round off final answer to 4 decimal places.

A: The tension T3 is equal to the weight of the mass mg. So, T3 = mg T3 = 19×9.8 T3 = 186.2 N

Q: ant is 6.8 cm tall and stands 1.9 cm in front of an unknown mirror. To its surprise the ant sees its...

A: Given Size of object h1 = 6.8 cm Size of image h2 =2.4 cm Object distance u = - 1.9 cm

Q: Imagine an airplane flying through the air. Use what you know about lift, drag, weight, and thrust t...

A: Part a) If lift becomes greater than weight, there will be a net force in the upward direction. So, ...

Q: 9. Mark, a 60 kg high school student, is sleeping on his waterbed when his 2 kg cat, Muffin, jumps o...

A: Given Mass of Mark ,M = 60 kg Mass of cat , m = 2 kg Force applied by the cat to sink 2 cm deepe...

Concept explainers

Angular speed, acceleration and displacement

Angular acceleration is defined as the rate of change in angular velocity with respect to time. It has both magnitude and direction. So, it is a vector quantity.

Angular Position

Before diving into angular position, one should understand the basics of position and its importance along with usage in day-to-day life. When one talks of position, it’s always relative with respect to some other object. For example, position of earth with respect to sun, position of school with respect to house, etc. Angular position is the rotational analogue of linear position.

Question

A disk, initially rotating at 137 rad/s, is slowed down with a constant angular acceleration of magnitude 4.99 rad/s. (a) How much time
does the disk take to stop? (b) Through what angle (rad) does the disk rotate during that time?
(a) Number
Units
(b) Number
Units

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step by step

Solved in 2 steps

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Angular speed, acceleration and displacement

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, physics and related others by exploring similar questions and additional content below.

Similar questions

A hollow cylinder that is rolling without slipping is given a velocity of 5.0 m/s and rolls up an incline to a vertical height of 1.0 m. If a hollow sphere of the same mass and radius is given the same initial velocity how high vertically does it roll up the incline?
A massless tether with a masses tied to both ends rotates about a fixed axis through the center. Can the total acceleration of the tether mass combination be zero If the angular velocity Is constant?
A wheel starts from rest and in 12.65 s is rotating with an angular speed of 5.435 rad/s. a. Find the magnitude of theconstant angular acceleration of the wheel. b. Through whatangle does the wheel move in 6.325 s?
A wheel is rotating about a fixed axis with constant angular acceleration 3 rad/s2. At different moments, its angular speed is 2 rad/s, 0. and +2 rad/s. For a point on the rim of the wheel, consider at these moments the magnitude of the tangential component of acceleration and the magnitude of the radial component of acceleration. Rank the following five items from largest to smallest: (a) |at| when = 2 rad/s, (b)|ar| when = 2 rad/s, (c)|ar| when = 0, (d) |at| when = 2 rad/s, and (e) |ar| when = 2 rad/s. If two items are equal, show them as equal in your ranking. If a quantity is equal to zero, show that fact in your ranking.
A 12.0-kg solid sphere of radius 1.50 m is being rotated by applying a constant tangential force of 10.0 N at a perpendicular distance of 1.50 m from the rotation axis through the center of the sphere. If the sphere is initially at rest, how many revolutions must the sphere go through while this force is applied before it reaches an angular speed of 30.0 rad/s?
A solid cylinder of mass 2.0 kg and radius 20 cm is rotating counterclockwise around a vertical axis through its center at 600 rev/min. A second solid cylinder of the same mass and radius is rotating clockwise around the same vertical axis at 900 rev/min. If the cylinders couple so that they rotate about the same vertical axis, what is the angular velocity of the combination?
A wheel 2.00 m in diameter lies in a vertical plane and rotates about its central axis with a constant angular acceleration of 4.00 rad/s2. The wheel starts at rest at t = 0, and the radius vector of a certain point P on the rim makes an angle of 57.3 with the horizontal at this time. At t = 2.00 s, find (a) the angular speed of the wheel and, for point P, (b) the tangential speed, (c) the total acceleration, and (d) the angular position.
A turntable (disk) of radius r = 26.0 cm and rotational inertia0.400 kg m2 rotates with an angular speed of 3.00 rad/s arounda frictionless, vertical axle. A wad of clay of mass m =0.250 kg drops onto and sticks to the edge of the turntable.What is the new angular speed of the turntable?
A playground merry-go-round of radius R = 2.00 m has a moment of inertia I = 250 kg m2 and is rotating at 10.0 rev/min about a frictionless, vertical axle. Facing the axle, a 25.0-kg child hops onto the merry-go-round and manages to sit down on the edge. What is the new angular speed of the merry-go-round?
A disk 8.00 cm in radius rotates at a constant rate of 1200 rev/min about its central axis. Determine (a) its angular speed in radians per second, (b) the tangential speed at a point 3.00 cm from its center, (c) the radial acceleration of a point on the rim, and (d) the total distance a point on the rim moves in 2.00 s.
A solid cylinder of radius 10.0 cm rolls down an incline with slipping. The angle of the incline is 30 . The coefficient of kinetic friction on the surface is 0.400. What is the angular acceleration of the solid cylinder? What is the linear acceleration?
Check Your Understanding The fan blades on a jet engine have a moment of inertia 30.0kgm2 . In 10s, they rotate counterclockwise from rest up to a rotation rate of 20 rev/s. (a) What torque must be applied to the blades to achieve this angular acceleration? (b) What is the torque required to bring the fan blades rotating at 20 rev/s to a rest in 20s?