A flexible pavement was designed for the following daily traffic with a 12-year design life: 1300 single axles at 8,000 lb each, 900 tandem axles at 15,000 lb each, 20 single axles at 40,000 lb each, and 200 tandem axles at 40,000 lb each. The highway was designed with 4 inches of hot-mix asphalt (HMA) wearing surface, 4 inches of hot-mix asphaltic base, and 8 inches of crushed stone subbase. The reliability was 70%, overall standard deviation was 0.5, ¨PSI was 2.0 (with a TSI of 2.5), and all drainage coefficients were 1.0. What was the soil resilient modulus of the subgrade used in design?

A flexible pavement was designed for the following daily traffic with a 12-year design life: 1300 single axles at 8,000 lb each, 900 tandem axles at 15,000 lb each, 20 single axles at 40,000 lb each, and 200 tandem axles at 40,000 lb each. The highway was designed with 4 inches of hot-mix asphalt (HMA) wearing surface, 4 inches of hot-mix asphaltic base, and 8 inches of crushed stone subbase. The reliability was 70%, overall standard deviation was 0.5, ¨PSI was 2.0 (with a TSI of 2.5), and all drainage coefficients were 1.0. What was the soil resilient modulus of the subgrade used in design?

Traffic and Highway Engineering

5th Edition

ISBN:9781305156241

Author:Garber, Nicholas J.

Publisher:Garber, Nicholas J.

Chapter19: Design Of Flexible Highway Pavements

Section: Chapter Questions

Problem 11P

See similar textbooks

Similar questions

A highway has the following pavement design daily traffic: 300 single axles at 10,000 lb each, 120 single axles at 18,000 lb each, 100 single axles at 23,000 lb each, 100 tandem axles at 32,000 lb each, 30 single axles at 32,000 lb each, and 100 triple axles at 40,000 lb each. A flexible pavement is designed to have 4 inches of sand-mix asphalt wearing surface, 6 inches of soil cement base, and 7 inches of crushed stone sub base. The pavement has a 10-year design life, a reliability of 85%, an overall standard deviation of 0.30, drainage coefficients of 1.0, an initial PSI of 4.7, and a TSI of 2.5. What is the minimum acceptable soil resilient modulus?
You have been asked to design a flexible pavement and the following daily traffic is expected for design: 6375 passenger cars with two 2-kip single axles, 375 18-wheel trucks with one 12-kip single axle and two 32-kip tandem axles, 225 triple-trailer trucks with one 18-kip single axle and six 36-kip tandem axles, and 525 single unit trucks with one 10-kip single axle and one 24-kip tandem axle. There are 3 lanes in the design direction (conservative design is to be used). Assuming a structural number of 5.0, determine the design-lane 18-kip ESALs for the pavement projected 15-year design life with the TSI of 2.5.
You have been asked to design the pavement for an access highway to a major truck terminal. The design daily truck traffic consists of the following: 80 single axles at 22,500 lb each, 570 tandem axles at 25,000 lb each, 50 tandem axles at 39,000 lb each, and 80 triple axles at 48,000 lb each. The highway is to be designed with rigid pavement having a modulus of rupture of 600lb/in2 and a modulus of elasticity of 5 million lb/in2. The reliability is to be 95%, the overall standard deviation is 0.4, the drainage coefficient is 0.9, ¨PSI is 1.7 (with a TSI of 2.5), and the load transfer coefficient is 3.2. The modulus of subgrade reaction is 200 lb/in3. If a 20-year design life is to be used, determine the required slab thickness
A flexible pavement is designed to last 10 years to withstand truck traffic that consists only of trucks with two 18-kip single axles. The pavement is designed for a soil CBR of 10, an initial PSI of 5.0, a TSI of 2.5, an overall standard deviation of 0.40 and a reliability of 90%, and the structural number was determined to be 6. On one section of this roadway, beneath an underpass, an engineer uses an 8-inch rigid pavement in an attempt to have it last longer before resurfacing. How many years will this rigid-pavement section last? (Given the same traffic conditions, modulus of rupture = 800 lb/in2, modulus of elasticity = 5,000,000 lb/in2, load transfer coefficient of 3.0 and drainage coefficient of 1.0.).
A flexible pavement is designed with 5 inches of hot-mix asphalt (HMA) wearing surface, 6 inches of hot-mix asphaltic base, and 10 inches of crushed stone subbase. All drainage coefficients are 1.0. Daily traffic is 200 passes of a 20-kip single axle, 200 passes of a 40-kip tandem axle, and 80 passes of a 22-kip single axle.If the initial minus the terminal PSI is 2.0 (the TSI is 2.5), the soil resilient modulus is 3000 lb/in2, and the overall standard deviation is 0.6, what is the probability(reliability) that this pavement will last 20 years before reaching its terminal serviceability?
A northbound direction on an interstate highway consists of four lanes of flexible pavement. It is conservatively designed with a 10-inch sand-mix asphaltic surface, 10-crushed stone base, and a 10-inch crushed-stone subbase (all drainage coefficients are 1.0). The subgrade CBR is 3, the overall standard deviation is 0.4, and the reliability is 95%. The initial PSI is 4.6 and the final PSI is 2.5. Daily total northbound road traffic consists of 51,000 cars (each with two 2-kip single axles), 840 buses (each with two 20-kip single axles), and 1,000 heavy vehicles (each with one 12-kip single axle and two 34-kip tandem axles). How many years was this pavement designed to last?
C. With a 12-year design life, a flexible pavement was developed for the following daily traffic: 1300 single axles weighing 8,000 pounds each, 900 tandem axles weighing 15,000 pounds each, 20 single axles weighing 40,000 pounds each, and 200 tandem axles weighing 40,000 pounds each. 4 inches of hot-mix asphalt (HMA) wearing surface, 4 inches of hot-mix asphaltic base, and 8 inches of crushed stone subbase were used to construct the roadway. All drainage coefficients were 1.0, the total standard deviation was 0.5, the APSI was 2.0 (with a TSI of 2.5), and the reliability was 70%. What was the subgrade's soil resilient modulus when it was designed?
Don't attempt wrong , downvote for incorrect solution. A flexible pavement is known to have a structural number of 4.0 and a soil resilient modulus of 10,000 psi. If a pavement structure is to be designed for a life of 15 years, a reliability of 95% and an overall standard deviation of 0.35, how many passes of a design vehicle with a 18,000 lb single axle and a 34,000 lb tandem axle can be driven on the pavement per day? The pavement's initial PSI is 4.2 with a TSI of 2.5.
A flexible pavement is constructed with 4 inches of hot-mix asphalt wearing surface, 10 inches soil cement base and 10 inches crushed stone subbase. The subgrade has a soil resilient modulus of 12,000 lb/in2, M2 = 1.5 and M3=1.127 for the materials of the pavement structure. The overall standard deviation is 0.5, the initial PSI = 5.0 and the terminal serviceability index (TSI) is 2.5. The daily traffic has 3000 cars, 1000 trucks and 500 trailers. The axle weights are: How long in years would the pavement last if R = 98% ? (Final answer to 2 decimal places)
Pavement Design and Analysis - Design a HMA pavement structure for a 6-lane divided urban highway using the AASHTO method to accommodate the traffic loads and conditions as follows. Give two alternative layer thickness combinations.
2 Describe the basic types of highway concrete pavements and give the conditions underwhich each type will be constructed
i need an answer immediately thank you Design the thickness of a pavement to carry a wheel load of 52kN based on the following conditions and type of pavement. 3. A flexible pavement with an allowable subgrade pressure of 0.14MPa and the max. tire pressure equal to 0.52MPa. This pressure is assumed to be uniformly distributed over the area of tire contact on the roadway according to the principle of cone pressure distribution.