A four-cylinder, two-stroke 2.4-L diesel engine that operates on an ideal Diesel cycle has a compression ratio of 22 and a cutoff ratio of 1.8. Use nitrogen as the working fluid which is at 70°C and 97 kPa at the beginning of the compression process. Determine how much power the engine will deliver at 5000 rpm. The properties of nitrogen at room temperature are cp= 1.039 kJ/kg-K, cv=0.743 kJ/kg-K, R = 0.2968 kJ/kg-K, and k = 1.4. The power the engine will deliver is kW.

A four-cylinder, two-stroke 2.4-L diesel engine that operates on an ideal Diesel cycle has a compression ratio of 22 and a cutoff ratio of 1.8. Use nitrogen as the working fluid which is at 70°C and 97 kPa at the beginning of the compression process. Determine how much power the engine will deliver at 5000 rpm. The properties of nitrogen at room temperature are cp= 1.039 kJ/kg-K, cv=0.743 kJ/kg-K, R = 0.2968 kJ/kg-K, and k = 1.4. The power the engine will deliver is kW.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

An ideal diesel engine has a compression ratio of 20 and uses air as the working fluid. The state of air at the beginning of the compression process is 95 kPa and 20°C. If the maximum temperature in the cycle is not to exceed 2200 K, determine the net work of the system as a function of compression ratio, r.
An ideal diesel engine has a compression ratio of 20 and uses air as the working fluid. The state of air at the beginning of the compression process is 95 kPa and 20°C. If the maximum temperature in the cycle is not to exceed 2200 K, determine the mean effective pressure. Assume constant specific heats for air at room temperature.
Consider an ideal gas-turbine cycle with two stages of compression and two stages of expansion. The pressure ratio across each stage of the compressor and turbine is 3. The air enters each stage of the compressor at 300 K and each stage of the turbine at 1200 K. Determine the back work ratio and the thermal efficiency of the cycle, assuming no regenerator is used.
An ideal Diesel cycle has a compression ratio of 18 and a cutoff ratio of 1.5. Determine the maximum air temperature and the rate of heat addition to this cycle when it produces 200 hp of power; the cycle is repeated 1200 times per minute; and the state of the air at the beginning of the compression is 95 kPa and 17°C. Use constant specific heats at room temperature.
A four-cylinder two-stroke 1.8-L diesel engine that operates on an ideal Diesel cycle has a compression ratio of 20 and a cutoff ratio of 1.7. Air is at 70°C and 97 kPa at the beginning of the compression process. Using the cold-air standard assumptions, determine how much power the engine will deliver at 2300 rpm and Plot the net work output, mean effective pressure, and thermal efficiency as a function of thecompression ratio.
An ideal diesel engine has a compression ratio of 20 and uses air as the working fluid. The state of air at the beginning of the compression process is 95 kPa and 20 °C. If the maximum temperature in the cycle is not to exceed 2200 K, determine a) the thermal efficiency and b) the mean effective pressure. Take cv = 718 j/kg/K, cp = 1005 j/kg/K and R = 287 j/kg/K
Q11) An ideal Diesel cycle with air as the working fluid has a compression ratio of 18 and cutoff ratio of 2. At the beginning of the compression process, the working fluid is at 100 kPa and 300 K, and 0.002 m3. Utilizing the cold-air standard assumptions, and assume the specific heats are constants, determine: a- The temperature and pressure of the air at the end of each process. b- The net output and the thermal efficiency, and c- The mean effective pressure.
An air standard diesel cycle has a compression ratio of 13 and a peak combustion temperature of 1681.55C. If the heat rejected by the engine amounts to 3kW, determine the theoretical output power that can be produced by the engine.a. 3.8552kW b. 3.8553kW c. 3.8551kW d. 3.8550kW
An ideal diesel engine has a compression ratio of 22 and uses air as the working fluid. The state of air at the beginning of the compression process is 95 kPa and 20°C. Take cv = 0.716 kJ/kg K, cp = 1.0 kJ/kg K. If the maximum temperature in the cycle is not to exceed 2200 K, determine the: Temperature after compression. Pressure after compression thermal efficiency. Amount of heat added mean effective pressure.
1.An ideal Otto cycle has a compression ratio of 8. At the beginning of the compression process, air is at 105 kPa and 28 °C, and 850 kJ/kg of heat is transferred to air during the constant-volume heat-addition process. Taking into account the variation of specific heats with temperature, determine (i) the pressure and temperature at the end of the heat addition process, (ii) the net work output, (iii) the thermal efficiency, and (iv) the mean effective pressure for the cycle.
An ideal Diesel cycle has a maximum cycle temperature of 2000°C. The state of the air at the beginning of the compression is P1 = 95 kPa and T1 = 15°C. This cycle is executed in a four-stroke, eight-cylinder engine with a cylinder bore of 10 cm and a piston stroke of 12 cm. The minimum volume enclosed in the cylinder is 5 percent of the maximum cylinder volume. Determine the power produced by this engine when it is operated at 1600 rpm. Use constant specific heats at room temperature.
The pressure ratio of a gas-turbine power plant operating on an ideal Brayton cycle is 8. The gas temperature is 300 degrees Fahrenheit at the compressor inlet and 1300 degrees Fahrenheit at the turbine inlet. Assuming an 80 percent compressor efficiency and an 80 percent turbine efficiency. A regenerator with an 80 percent efficiency is installed at the power plant. Determine the variation of particular heats with temperature using specific heats. a. The back work ratio b.The thermal efficiency