A gas stream with a volume flow of 1200 m3 / h and a temperature of 100 °C contains 10 vol- % water vapor and the rest nitrogen gas. This stream is mixed with an air stream, 500 m3 / h, 10 °C which, in addition to nitrogen gas, contains 15% by volume of water vapor. All currents hold the pressure 101.3 kPa. Calculate the composition of the mixed current. The answer should be given as vol%.

A gas stream with a volume flow of 1200 m3 / h and a temperature of 100 °C contains 10 vol- % water vapor and the rest nitrogen gas. This stream is mixed with an air stream, 500 m3 / h, 10 °C which, in addition to nitrogen gas, contains 15% by volume of water vapor. All currents hold the pressure 101.3 kPa. Calculate the composition of the mixed current. The answer should be given as vol%.

Appl Of Ms Excel In Analytical Chemistry

2nd Edition

ISBN:9781285686691

Author:Crouch

Publisher:Crouch

Chapter11: Dynamic Electrochemistry

Section: Chapter Questions

Problem 2P

See similar textbooks

Similar questions

In a solid - liquid extraction process operated according to the principle of continuous reverse current, the oil of a nutrient will be extracted with pure hexane. A mixture containing 7000 kg of inert solid, 1500 kg of oil and 500 kg of hexane enters the process per hour. The upper stream leaving the total stage contains 65% hexane and 35% oil by weight. A total of 85% of the oil in the inlet current will be recovered. The underflow is constant at N=2.0 kg inert solid/kg solution; a. Find the amount and composition of the output current
The exchange current density at the electrode Pt| Fe3+| Fe2+ is 2.4 x 10-3 A cm-2, How many electrons are transported through the double layer per second in the cell (area of 1 cm2 each)? Estimate the number of times per second that a single atom on the surface takes part in an electron transfer event, assuming that the atom occupies 280 pm2 of the surface of the electrode
An important ore of lithium is spodumene, LiAlSi₂O₆. Toextract the metal, the form of spodumene is first converted into the less dense form in preparation for subsequent leaching and washing steps. Use the following data to calculate the lowest temperature at which the α →β conversion is feasible:
Q/ ture or false 1- The difference between wet and dry corrosion, in the first case it occurs in the presence of moisture and the second in its absence * 2- It is necessary to fix the names of the equipment on the illustrative curve of the industrial process * 3- The flow curves are classified according to the number of reactors and the mechanism of separation or non-separation of the products * 4- In the processes that involve the purification of raw materials and products, it is preferable to purify the raw materials by adsorption, while the products are purified by washing, stripping and absorption. 5- The amount of dissolved substances in well water differs greatly from surface water due to the difference in temperature. * 6- The biological waste has no significant effect on the efficiency of the flow, but rather its effect on the toxicity of the water used for industrial purposes. 7- Several methods are used to remove unacceptable odors from water, including chemical…
The exchange-current density for a Pt|Fe3+,Fe2+ electrode is 2.5 mA cm−2. The standard potential of the electrode is +0.77 V. Derive an expression for the current flowing through an electrode of surface area 1.0 cm2 as a function of the potential applied to the electrode; assume standard conditions.
If a dilute H2 SO4 solution is electrolyzed with copper electrodes, the most likely electrode reactions are 2H ^ + + 2e- = H2 (g) at the cathode and 2Cu (s) + H2O = Cu2O (s) + 2H ^ + + 2e- at the anode. If we observe the formation of 27.4 cm3 of moist hydrogen (751 barometric torrs, 23.3 ° C) at the cathode, what change in weight will there be simultaneously at the anode? Data: Pv H2O 23.3 ° C = 22 torr.Atomic mass: Cu (65); O (16); H (1)
. A sample of a liquid which has molar mass 102 g/mol was heated in a vessel by using electricity. Theliquid boiled at 78°C when the pressure was 650 Torr. At the boiling point, it was found that 1.871 gof the sample vaporized when a current of 0.232 A from a 12.0 V supply was passed for 650 s.Calculate the (molar) enthalpy and internal energy of vaporization.
Which unit is used to measure the magnitude of electricalcurrent? Which unit is used to measure the magnitude of apotential difference? Explain how electrical current and potentialdifference differ.
Given that ΔrG⦵ = −212.7 kJ mol−1 for the reaction Zn(s) + Cu2+(aq) → Zn2+(aq) + Cu(s) in the Daniell cell at 25 °C, and b (CuSO4) = 1.00 × 10−3 mol kg−1 and b (ZnSO4) = 3.00 × 10−3 mol kg−1, calculate (a) the ionic strengths of the solutions, (b) the mean ionic activity coefficients in the compartments, (c) the reaction quotient, (d) the standard cell potential, and (e) the cell potential. (Take γ+ = γ− = γ± in the respective compartments. Use the Debye–Hückel limiting law.)
A block of copper of mass 500 g and initially at 293 K is in thermal contact with an electric heater of resistance 1.00 kΩ and negligible mass. A current of 1.00 A is passed for 15.0 s. Calculate the change in entropy of the copper, taking Cp,m = 24.4 J K−1 mol−1. The experiment is then repeated with the copper immersed in a stream of water that maintains the temperature of the copper block at 293 K. Calculate the change in entropy of the copper and the water in this case.
Calculate the persistency (S) of VX at 25oC ,VX: MW= 267.38; Po = 0.0007 torr @ 25oC
2) If 25g of NaCl is dissolved into a final volume of 500mL, what is the percent (w/v) concentration of NaCl in the solution? COMPUTE 3) How will you prepare 200mL of 0.3M NaCl prepared? COMPUTE and Include a short instruction in the preparation. 4) From a stock solution of 1M Tris solution, how will you prepare 400mL of 0.2M? COMPUTE and Do not forget to include a short instruction in the preparation. 5) How is 4mL of 50mM NaCl solution be prepared from a 2M NaCl stock? COMPUTE and Do not forget to include a short instruction in the preparation. 6) What is the molar concentration of a 10% NaCl solution? (At 25⁰C, the density of 10% NaCl is 1.09 g/ml ) COMPUTE