A heat engine draws 1200 kW from a hot reservoir at 800K and rejects 600 KWto a cold reservoir at 375Ka) Show using the Clausius Inequality whether that the process is possibieb) What is the efficiency of the process6) f the process were reversible what would the efficiency be if the enginedraws the same 1200 kW from the hot reservoir and what would be theheat rejected

Answered: Image /qna-images/answer/d06aa716-37d2-4058-bee4-a130c8ae5bae.jpg

A heat engine draws 1200 kW from a hot reservoir at 800K and rejects 600 kW to a cold reservoir at 375K a) Show using the Clausius Inequality whether that the process is possible b) What is the efficiency of the process 6) If the process were reversible what would the efficiency be if the engine draws the same 1200 kW from the hot reservoir and what would be the heat rejected

A heat engine draws 1200 kW from a hot reservoir at 800K and rejects 600 kW to a cold reservoir at 375K a) Show using the Clausius Inequality whether that the process is possible b) What is the efficiency of the process 6) If the process were reversible what would the efficiency be if the engine draws the same 1200 kW from the hot reservoir and what would be the heat rejected

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A reversible engine receives heat from a source at 800 ° C some heat goes to a sink at a temperature of 25 ° C. If the motor receives a heat flow of 1200 kJ / min find: a) The thermal efficiency of the motor and b) The working power output of the motor are in kW. Ans: a)η=72.2% b)Ẇ=14.44kW
Water vapor enters an adiabatic turbine at a pressure of 8 MPa, a temperature of 600 ℃ and a speed of 100 m/s, and then a pressure of 50 kPa exits at a temperature of 150 ℃ and a speed of 160 m/s. The turbine power is 10 MW. According to this; a) The steam flow rate from the turbine b) Do you find the isanthropic efficiency of the turbine?
A Carnot engine requires 35kJ/s from the hot source. The engine produces 15kW of power and the temperature of the sink is 26degC. What is the temperature of the hot source in degC.the answer is 250.25 deg C but dont know solution pls help
A large heat pump cools the river with a temperature of 223.15 K and flow of 10 m³/s by 3.0 K. The received heat is transferred to the hot water system with a temperature of 313.15 K. a) How much heat power does it gain in this way? (The solution is 126 MW) b) For how many inhabitants does the heating system suffice if each inhabitant needs 500 W of power for heating? (The solution is 250 000) c) How much electrical power does the pump need if the total losses are twice as large as for the equivalent Carnot machine? (The solution is 23 MW)
A domestic food freezer maintains a temperature of-15°C. The ambient air temperature is 30°C. If heat leaks into the freezer at the continuous rate of 1.75 kJ/s what is the least power necessary to pump this heat our continuously?
Air is compressed in a two-stage , double-acting compressor which is electrically driven at 165 rpm. The low pressure cylinder (30.5 x 35.5-cm) receives 6.85 m3/min of air at 96.53 kPaa, 43.3°C, and the high pressure cylinder (20.3 x 35.5-cm) discharges the air at 717.06 kPa. Piston rods are 5.1 cm in diameter and the isothermal overall efficiency is 74%. Find (a) the volumetric efficiency, (b) the power of the driving motor.
With a 1 kW pump, the energy leakage per unit time is 0.6 kW for a 1 ℃ temperature difference between a house to be heated and the outside environment. Coefficient of performance of the heat pump used to keep this house at a constant temperature of 20 ℃; If it is up to the theoretical heat pump performance coefficient; What is the minimum outdoor temperature ℃ for this heat pump to meet its needs and be used?
Find the second law efficiency of the steam turbine operating steadily at initial pressure of 3 MPa and initial temperature of 4500C . The final conditions of steam at 0.2 MPa and 2000C . Neglect the kinetic and potential energy changes. The heat loss from the steam turbine to the surroundings is 250 kW. Assume the mass flow rate of steam is 7 kg/s A) 78%B) 50%C) 58%D) 98% make it fast so that I can rate you..
Write legibly, provide manual step by step solution, and diagram for below given problem. Steam enters a turbine at 1.4 Mpa and 320. The turbine internal efficiency is 70%, and the total requirement is 800 kw. The exhaust is to the back pressure system, maintains at 175kpa. Find the stean flow rate. a. 2.62 kg/s c. 3.23 kg/sb. 4.23 kg/s d. 5.34 kg/s
A 4 kW 20L water heater is switched on for 10minutes. The heat capacity of water is 4.187 kJ/kgK. Assuming total electrical energy has gone intoheating the water, find the increase in watertemperature.
A 45 MW thermal power plant, which receives 80 MW of heat from a thermal source of 440 ℃ terk, leaves the heat to the 18 river next to it. What will be the real thermal efficiency of a thermal power plant?
Air is compressed in a two-stage , double-acting compressor which is electrically driven at 165 rpm. The low pressure cylinder (30.5 x 35.5-cm) receives 6.85 m3/min of air at 96.53 kPa, 43.3°C, and the high pressure cylinder (20.3 x 35.5-cm) discharges the air at 717.06 kPa. Piston rods are 5.1 cm in diameter and the isothermal overall efficiency is 74%. Find (a) the volumetric efficiency, (b) the power of the driving motor.