A 1-0, induction motor has stator windings in space quadrature and is supplied with a single-phasevoltage of 200 V at 50 Hz. The standstill impedance of the main winding is (5.2 +j 10.1) and of theauxiliary winding is (19.7 + j 14.2). Find the value of capitance to be inserted in the auxiliarywinding for maximum starting torque.(Electrical Machines-III, Indore Univ. July, 1977)A 230-V, 50-Hz, 6-pole, single-phase induction motor has the following constants.r, = 0.12 2, r, = 0.14 N, x, = x, = 0.25 Q, x„ = 15 2.If the core loss is 250 W and friction and windage losses are 500 W, determine the efficiency andtorque at s = 0.05.(Electrical Machines-IV, Bangalore Univ. Aug. 1978)Explain how the pulsating mmf of a single-phase induction motor may be considered equivalent totwo oppositely-rotating fields. Develop an expression for the torque of the motor.A 125-W, 4-pole, 110-V, 50-Hz single-phase induction motor has the no-load rotational loss of 25watts and total rotor copper loss at rated load of 25 watts at a slip of 0.06. The rotor *R loss may beneglected.At a slip s = 0.06, what is the power input to the machine ?(Electrical Machines-III, Indore Univ. July 1977)

Answered: Image /qna-images/answer/d3879cb3-9c76-4526-88b8-ea9b7c16d7fd.jpg

A l-0, induction motor has stator windings in space quadrature and is supplied with a single-phase voltage of 200 V at 50 Hz. The standstill impedance of the main winding is (5.2 +j 10.1) and of the auxiliary winding is (19.7 + j 14.2). Find the value of capitance to be inserted in the auxiliary winding for maximum starting torque. (Electrical Machines-III, Indore Univ. July, 1977)

A l-0, induction motor has stator windings in space quadrature and is supplied with a single-phase voltage of 200 V at 50 Hz. The standstill impedance of the main winding is (5.2 +j 10.1) and of the auxiliary winding is (19.7 + j 14.2). Find the value of capitance to be inserted in the auxiliary winding for maximum starting torque. (Electrical Machines-III, Indore Univ. July, 1977)

Introductory Circuit Analysis (13th Edition)

13th Edition

ISBN:9780133923605

Author:Robert L. Boylestad

Publisher:Robert L. Boylestad

Chapter1: Introduction

Section: Chapter Questions

Problem 1P: Visit your local library (at school or home) and describe the extent to which it provides literature...

See similar textbooks

Similar questions

A three-phase induction motor, operating at rated voltage and frequency, has a startingtorque of 1.35 times and a maximum torque of 2.2 times, both with respect to its rated-loadtorque. Ignoring the effects of the stator resistance and rotational losses and assumingconstant rotor resistance, determine the slip rated load, and the rotor current at starting (as a percentage of the rotor current at rated load). The slip at maximum torque is 0.343 if that helps.
18. A single-phase, 120 V, 60 Hz, four-pole, split-phase induction motor has the following standstill impedances:Main winding: Zm =5+j6.25Auxiliary winding: Za =8+j6a) Determine the value of capacitance to be added in series with the auxiliary winding to obtain maximum starting torque.b) Compare the starting torques and starting current with and without the added capacitance in the auxiliary winding circuit when operated from a 120V, 60Hz supply.
Type your question here Prove that the power developed by a three-phase induction motor is maximum when the equivalent load resistance RL is equal to the magnitude of the standstill impedance of the motor Zol. Then find the maximum power and slip at which occurs.
A three-phase induction motor, operating at rated voltage and frequency, has a startingtorque of 1.35 times and a maximum torque of 2.2 times, both with respect to its rated-loadtorque. Ignoring the effects of the stator resistance and rotational losses and assumingconstant rotor resistance, determine the slip at the maximum torque;
Design and develop equivalent circuit model of a single phase Induction motor with th consideration of core losses present with the parameter consideration of stator resistance R1 and reactance X1 and two rotor parameters which includes r2,x2 and magnetising reactance xm. (Illustration is required) Draw by hand please
A three-phase 60 Hz induction motor connected to a three-phase bus at rated voltage isoperating at a low slip condition (i.e s < 20%) resulting in a steady state speed of 1090 rpm.(a) How many poles does the motor have?(b) What is the percentage slip at the operating speed?(c) What is the corresponding frequency, (fr) of the currents and voltages induced in therotor winding?
A four-pole, single-phase, 120 V, 60 Hz induction motor gave the following standstill impedances when tested at rated frequency:Main winding : Zm =1.5+j4 ohmsAuxiliary winding : Za =3+j6 ohmsa) Determine the value of external resistance to be inserted in series with the auxiliary winding to obtain maximum starting torque as a resistor split-phase motor.b) Determine the value of the capacitor to be inserted in series with the auxiliary winding to obtain maximum starting torque as a capacitor-start motor.c) Determine the value of the capacitor to be inserted in series with the auxiliary winding to obtain maximum starting torque per ampere of the starting current as a capacitor-start motor.d) Compare the starting torques and starting currents in parts (a), (b), and (c) expressed as per unit of the starting torque without any external element in the auxiliary circuit, when operated at 120V, 60Hz.
A 80 kW, 480-V, 60-Hz, six pole induction motor has a slip of 5 percent when operating at fullload conditions. At full-load conditions, the friction and windage losses are 300 W, and the core losses are 400 W. For full-load conditions, compute the induced torque,T-ind, in N-m.
A three-phase, Y-connected, 220 V, 5 kVA, salient-pole synchronous generator is employed to supply power to a load with unitary fp. By means of a slip test, the direct-axis synchronous reactance is determined to be 12 Ω and the quadrature-axis synchronous reactance, 7 Ω. Consider that the rated current is delivered to the load at the rated voltage and that the armature resistance is negligible. (a) Calculate the corresponding value of the excitation voltage. (b) What is the value of the internal phase shift angle? (c) What is the value of the power angle?
The air-gap flux density of a two-pole induction motor is given by B=Bm cos(ωt−θ)where Bm is the peak flux density, θ is the angular displacement around the air gap, and we have assumed clockwise rotation. Give the corresponding expression for the flux density of a four-pole induction motor; of a six-pole induction motor.
14 P.14 - A three-phase induction motor with 4 magnetic poles, 60 Hz, rotates with a speed of n=1750 rpm In order to achieve a quick stop we can use a proper swap of 2 phases which normally corresponds to an inversion of rotation direction. For fast crossing, the technique of inversion of the direction of rotation by changing 2 phases is used. At the precise moment we swap the 2 phases, what are the slip, s, and the rotor current frequency, fR, like?
A 25 HP, 6 pole, 50 Hz, 3-phase slip ring induction motor runs at 960revolutions per minute on full load with a rotor current per phase of 35 A.Allowing 250 W for the copper loss in the short-circuiting gear, and 1000Wfor mechanical losses, find the resistance per phase of the three-phaserotor winding.