8. A large artery in a person's body can be approximated by a tube of diameter 9 mm and length 0.35 m. Also assume that blood has a viscosity of approximately 4 X 10-3 N s/m2, a specific grav- ity of 1.0, and that the pressure at the beginning of the artery is equiv- alent to 120 mm Hg. If the flow were steady (it is not) with V 0.2 m/s, detemine the pressure at the end of the artery if it is ori- ented (a) vertically up (flow up) or (b) horizontal. %3D

8. A large artery in a person's body can be approximated by a tube of diameter 9 mm and length 0.35 m. Also assume that blood has a viscosity of approximately 4 X 10-3 N s/m2, a specific grav- ity of 1.0, and that the pressure at the beginning of the artery is equiv- alent to 120 mm Hg. If the flow were steady (it is not) with V 0.2 m/s, detemine the pressure at the end of the artery if it is ori- ented (a) vertically up (flow up) or (b) horizontal. %3D

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

At 0.5m/s, engine oil with a kinematic viscosity of 0.00024m2/s flows inside an annulus. A 3-in schedule 40 (ID= 3.068in) and a 1-in schedule 40 (OD= 1.32in; ID= 1.049in) concentric steel pipe 10cm long form the annulus. What is the pressure drop in terms of oil meters?
Sulfuric acid with a density of 1980 kg / m3 and a viscosity of 26.7 cP flows in a pipe with a diameter of 35 mm. If the acid flow rate is 2 m3 / min, what is the pressure loss due to friction in a 30 m long smooth pipe? a. Reynold number = . b. Loss of Pressure = kPa.
Sulfuric acid with a density of 1980 kg / m3 and a viscosity of 26.7 cP flows in a pipe with a diameter of 35 mm. If the acid flow rate is 1.55 m3 / min, what is the pressure loss due to friction in a 30 m long smooth pipe? a. Reynold number = b. Loss of Pressure =
A smooth square cylinder is put in 15 °C flowing water. The flow direction is perpendicular to the long axis of the cylinder (parallel to the square section). The edge length of the square is s=2.0m. The long axis length is L=5.0m. The flow velocity is v=0.046m/s. The density of water is ρ=1000kg/m3. T he dynamic viscosity is η=1.15×10-3kg/m·s. (1) Calculate the Reynold's number Re=_________
Water with a dynamic viscosity of 0.892 cP flows in a smooth pipe of diameter, D = 50 mm and length, L = 10 m. The cross-sectional mean velocity is 1.50 m/s. What type of flow is observed? Calculate the discharge, the entrance length and the friction coefficient. Please solve according to question... I need all answers... Thank you
liquid (density 800kg/m3, viscosity 10−3 kg/ms) has to be supplied at a mean speed of 2m/s through a pipe of diameter 12.5mm with a surface roughness equivalent to that for structural steel. What is the magnitude of the pressure gradient necessary to achieve this flow? Your answer should have a positive sign and be to the nearest 10 Pa/m. You may wish to use the Moody diagram.
Find the type of flow based on the Reynold's Number for a fluid of sp.gr 0.8 which is flowing in the flow channel of diameter 300mm, velocity of flow is 1000m/s and dynamic viscosity of 17.6poise
What is the volume flow rate for water (viscosity= .0010 Pa×s) through a length of pipe L= 0.60m and pipe radius r= 1.03cm if the pressure difference across this length of pipe is 5.2 kPa? Note that 1 kPa= 1000 Pa. What would the volume flow rate be if the same pipe had a radius that is reduced by 21% (i.e. the radius is 79% of its previous value)? Let's call this flow rate Q1. What is the ratio of Q1 to the original flow rate Q? Express this as a decimal number.
A pipeline 0.5 m diameter and 1200 m long is used for transporting an oil of density 150 kg/m3 and of viscosity 0.91 Pa-s at 0.4 m2/s. If the roughness of the pipe is 0.5 mm, what is the pressure drop?
Find the friction factor: Diameter, D=50 cm velocity, v=1 m/s Kinematic Viscosity=1 mm2/s Relative Roughness=0.00005
The Reynolds number is defined for a pipe as (velocity· diameter· density) / viscosity. What isthe Reynolds number for water flowing at 10 ft/ s in a pipe with a diameter of 6 in? What are itsdimensions?
Calculate pressure loss in a pipe ( d = 55 mm, L = 200 m ), for oil mass flow rate of 133 kg/min. Oil density is 900 kg/m3and kinematic viscosity is ν = 4·10-5 m2/s. The sum of local losses in the pipe is 3,5. Round off the answer to one decimal digit in kPa, but enter the answer without the unit.