The air conditioner in a room inputs air and passes it inside where an evaporator coil is located. The air has initial condition of humidity ratio of 0.02, temperature 30°C and final condition of humidity ratio of 0.015, temperature 21°C. If the mass flow of air mixture is 10 kg/min. Determine the Sensible Heat Load in kilojoules in constant pressure.

The air conditioner in a room inputs air and passes it inside where an evaporator coil is located. The air has initial condition of humidity ratio of 0.02, temperature 30°C and final condition of humidity ratio of 0.015, temperature 21°C. If the mass flow of air mixture is 10 kg/min. Determine the Sensible Heat Load in kilojoules in constant pressure.

Principles of Heat Transfer (Activate Learning with these NEW titles from Engineering!)

8th Edition

ISBN:9781305387102

Author:Kreith, Frank; Manglik, Raj M.

Publisher:Kreith, Frank; Manglik, Raj M.

Chapter8: Natural Convection

Section: Chapter Questions

Problem 8.3P

See similar textbooks

Similar questions

What is the temperature entering the cooling sectionwhen 25 kW of heat are removed and the air exits at 15 deg C, a relative humidity of 30% and a volumetric flowrate of 0.7 m^3/s?
Air at a dry ball temperature of 9m5 ° and rh 4% is passed over the cooling coil so that the temperature of the dry ball of air becomes 50 ° C. How much heat is released from the air in the process
What is the equivalent evaporation of the boiler? Determine the specific heat capacity of the delivered steam
A cold room for storage is kept at atemperature of 10[°C] and a relative humidity of 80%. The air flow overthe evaporator is 30,000 [m³/h] and the air temperature measured at the outlet of theevaporator is 5[°C]. Under these conditions, the installation develops a cooling power of 100 [kW].Calculate the amount of condensate water that forms in the evaporator inone hour.
a supply tank having 14m long and 1.7m diameter is used to store fuel oil with 34degree API at 110degree C. if the tank is used for diesel power plant consuming 62 kg/hr of fuel, determine the number of days the supply tank can hold continuous operation.
the question below is already answered in the photos that I provided I only want to ask how did it find the answersSaturated steam at a pressure of 25 psia is sprayed into a stream of moist air. The initial condition of the air is 55 dry-bulb temperature and 35 F de-point temperature. The mass rate of air flow is 2000 lb per min. Barometric pressure is 14.696 psia. Determine how much steam must be added in lb per min to produce a saturated air condition, b) the resulting temperature of the saturated air.my question here is:regarding of the solution pls elaborate how did it get w1 and h1 is it given in the psychrometric chart or it has a specific solution to follow
Calculate the value of dryness fraction? in vessel which is volume of 5 m^3 contains (4.95 m^3) of saturated vapor and (0.05 m^3) of saturated liquid water at pressure * (100 kpa)
air at dry ball temperature is 35 ° C and RH 30%, air is heated to dry ball temperature 85 ° C. The heated air is then flowed through a humidifier to reduce RH to 25%. Determine the change in absolute humidity of air in initial to final conditions and change in air enthalpy in initial to final conditions
5kg of water vapour are contained at 150kPa and 90% dry in a suitable enclosure. Calculate: 1.2.1 the heat required to produce saturated vapour
An aqua ammonia absorption plant operates between pressures at 206.8 and 1378 kPaa. The strongsolution enters the generator saturated at 82.2°C and the weak solution leaves the generator saturated at93.3°C. Saturated vapor leaves the generator with a concentration of 0.993 kg NH3 /kg mixture. Assuming thatthe strong solution leaving the absorber is saturated, neglecting pump work and heat losses, calculate perkg/min flow of refrigerant through the evaporator:a. the mass flow of strong solution entering the generator in kg/minb. the mass flow of weak solution leaving the generator in kg/minc. the enthalpy of the weak solution entering the absorber in kJ/kg weak solution and the heat rejected in the absorber in kW Saturated liquid at 1378 kPaa and 82.2°C has a concentration of 0.46 kg NH3 /kg mixture and an enthalpy of209.2 kJ/kg of mixture, saturated liquid at 1378 kPaa and 93.3°C has a concentration of 0.41 kg NH3 /kg mixtureand an enthalpy of 255.68 kJ/kg of mixture, saturated liquid…
Which is better for humidifying air, adding steam or water? Justify?
Winter air is heated & humidified thru steam heated coil and humidified using water sprayer. Air is flowing at a rate of 750 cubic meter per minute. Winter air is initially at 10 C dry bulb and 90 % RH. The final condition of air after the process is 30 C dry bulb & 60 % RH. Consider normal atmospheric pressure. Determine: rate of saturated steam injected in the sprayer per second with steam temperature of 30 C (INCLUDE THE PYCHROMETRIC CHART PLS)