A Liquid Limit test was carried out on a sample of Clay with the following results:Number of taps6.12262831Moisture Content53.452.248.340.038.837.1(%6)The results from the Plastic Limit test gave the Plastic Limit of 28%.Determine:a) the Liquid Limitb) the Plasticity Index of the soilc) and Classify the soil

Answered: Image /qna-images/answer/874945c1-2d15-4ef2-bcde-37762e8d2649.jpg

A Liquid Limit test was carried out on a sample of Clay with the following results: Number of taps 6. 12 26 28 31 Moisture Content 53.4 52.2 48.3 40.0 38.8 37.1 (36) The results from the Plastic Limit test gave the Plastic Limit of 28%. Determine: a) the Liquid Limit b) the Plasticity Index of the soil c) and Classify the soil

A Liquid Limit test was carried out on a sample of Clay with the following results: Number of taps 6. 12 26 28 31 Moisture Content 53.4 52.2 48.3 40.0 38.8 37.1 (36) The results from the Plastic Limit test gave the Plastic Limit of 28%. Determine: a) the Liquid Limit b) the Plasticity Index of the soil c) and Classify the soil

Principles of Geotechnical Engineering (MindTap Course List)

9th Edition

ISBN:9781305970939

Author:Braja M. Das, Khaled Sobhan

Publisher:Braja M. Das, Khaled Sobhan

Chapter4: Plasticity And Structure Of Soil

Section: Chapter Questions

Problem 4.5P: The following data were obtained by conducting liquid limit and plastic limit tests on a soil...

See similar textbooks

Similar questions

The following data were obtained by conducting liquid limit and plastic limit tests on a soil collected from the site. Liquid limit tests: Plastic limit test: PL = 19.3% a. Draw the flow curve and determine the liquid limit. b. Using the Casagrande plasticity chart (Figure 4.21), determine the soil type.
Coefficient Permeability of Soil A falling head permeability test is conducted on silty soil. The sample diameter is 10.0 cmand its length or thickness is 7.8 cm. The diameter of the standpipe is 6.0 mm. The head at thestart of the test is 47.8 cm. The test lasts 8.5 min and the head falls to 22.6 cm. Find thecoefficient of permeability of this soil in cm/s? Provide step by step solution.
A soil sample has a unit weight of 1.9 g/cc and w=12%. If Gs of solids is 2.65, determine the void ratio in percent.
A cubical sample collected from Lobo shoreline (a soft marine silty clay) has been preparedfor testing in a true triaxial device. The dimensions of the sample are 78 mm by 78 mm by 78mm. The sample has a moisture content (w) of 68.5% and a moist density (ρ) of 1.43 g/cm3.The average specific gravity of solids (Gs) is 2.55.Determine(a) the void ratio (e),(b) the degree of saturation (S),(c) the moist density (γ),(d) moisture content (w) if the soil becomes saturated at the same total volume;(e) the density (ρ) of the soil if all pore fluid is dried off with no change in totalvolume.
A soil sample has a unit weight of 1.9 g/cc and w=12%. If Gs of solids is 2.65, determine the porosity in percent.
1. A soil sample has a maximum void ratio of 0.85 and minimum void ratio of 0.55. It was also found out that the porosity is 23%, moisture content is 12% and Gs = 2.65. Compute the dry unit weight of the sample. 2. Estimate the compression index of soft clay with moisture content of 56.4 percent. The liquid limit is 56 percent.
A soil sample has a unit weight of 1.9 g/cc and w=12%. If Gs of solids is 2.65, determine the degree of saturation and porosity in percent.
Q1. Undisturbed soil sample was collected from the filed in Melbourne in steel tube for laboratory evaluation. The tube has the diameter of 85 mm, length of 170 mm and the moisture weight of 1600 g. If the oven-dried weight was 1200 g and Gs = 2.69, calculate the followings:a) Bulk unit weight (?) in kN/m3b) Field moisture content (w)c) Void ratio & porosity (e and ⴄ) d) Degree of saturation (Sr)
Results of a standard proctor ompaction test on a silty sand are shown. PLEASE COMPLETE SOLUTION. 1) Find the maximum dry unit weight and optimum moisture content. 2) What is the moist unit weight at optimum moisture content? 3) What is the degree of saturation at optimum moisture content? Given: ?? = 2.69 4) If the required field dry unit weight is 18.5 ??/?3, what is the relative compaction? 5) What should be the range of compaction moisture contents in the field to achieve the above relative compaction? 6) If the minimum and maximum void ratios are 0.31 and 0.82, respectively, what is the relative density of compaction in the field?
A liquid limit test carried out on a sample of inorganic soil taken from below the water table gave the following results. Fall cone penetration: 15.5, 18.2,21.4, 23.6 and; moisture content: 34.6, 40.8, 48.2, 53.4. determine LL,PL,PI
A sample coarse grained soil is 50mm. In diameter and 150mm long was tested in a constant-head apparatus. The soil sample was prepared at a void ratio of 1.5. The total head was kept constant at 300mm and the amount of water is collected in 4 sec. was 50cm^3. The test temperature was 22°Ca.) Compute the temperature correction factor.b.) Compute the corrected coefficient of permeability in cm/sec. c.) Compute the interstitial velocity.
10. The results of a Standard Proctoretest is tabulated as follows: (SEE PICTURE) Determine the maximum dry unit weight of compaction Determine the optimum moisture content Determine the void ratio at the optimum moisture content Gs = 2.70 Determine the degree of saturation at the optimum moisture content A field unit determination test for the soil, yielded the following data. Moisture content = 12% and moist unit weight = 106 pcf. Determine the relative compaction.