A constant-head test was conducted on a sample of soil 15 cm long and 60 cm2 in cross-sectional area. The quantity of water collected was 50 cm3 in 20 seconds under a head difference of 24 cm. Calculate the hydraulic conductivity. If the porosity of the sand is 55%, calculate the average velocity and the seepage velocity. Estimate the hydraulic conductivity of a similar soil with a porosity of 35% from the results of this test. What is the soil type tested?

A constant-head test was conducted on a sample of soil 15 cm long and 60 cm2 in cross-sectional area. The quantity of water collected was 50 cm3 in 20 seconds under a head difference of 24 cm. Calculate the hydraulic conductivity. If the porosity of the sand is 55%, calculate the average velocity and the seepage velocity. Estimate the hydraulic conductivity of a similar soil with a porosity of 35% from the results of this test. What is the soil type tested?

Fundamentals of Geotechnical Engineering (MindTap Course List)

5th Edition

ISBN:9781305635180

Author:Braja M. Das, Nagaratnam Sivakugan

Publisher:Braja M. Das, Nagaratnam Sivakugan

Chapter6: Hydraulic Conductivity

Section: Chapter Questions

Problem 6.7P

See similar textbooks

Similar questions

A constant-head test was conducted on a sample of soil 15 cm long and 60 cm2 in cross-sectional area. The quantity of water collected was 50cm3 in 20 seconds under a head difference of 24 cm. Calculate the hydraulic conductivity. If the porosity of the sand is 55%, calculate the average velocity and the seepage velocity. Estimate the’ hydraulic conductivity of a similar soil with a porosity of 35% from the results of this test.
In a constant-head permeability test, a sample of soil 12 cm long and 6 cm in diameter discharged 1.5 x 10^(-3) m^3 of water in 10 minutes. The head difference in two piezometers A and B located at 1 cm and 11 cm, respectively, from the bottom of the sample is 2 cm. Determine the hydraulic conductivity of the soil. What is the soil type tested?
In a constant-head permeability test, a 60 cm3 of water was collected in 25 seconds with a head difference of “H” cm in a soil sample that has a diameter of 8 cm and length of 12 cm. Calculate the hydraulic conductivity. If the sample has a porosity of 60%, determine the average velocity and seepage velocity. Estimate the coefficient of permeability of a soil similar to the sample with a porosity of 45% from the results of this test.
In a constant-head permeability test, a 60 cm3 of water was collected in 25 seconds with ahead difference of 24.3 cm in a soil sample that has a diameter of 8 cm and length of 12 cm.Calculate the hydraulic conductivity. If the sample has a porosity of 60%, determine the averagevelocity and seepage velocity. Estimate the coefficient of permeability (cm/s) of a soil similar tothe sample with a porosity of 45% from the results of this test. Show your complete solution.
The results of a constant-head permeability test for a fine sand sample having a diameter of 70 mm and a length of 140 mm are as follows (refer to Figure 7.5):• Constant-head difference = 550 mm• Water collected in 7 min = 450 cm3• Void ratio of sand = 0.8Determine:a. Hydraulic conductivity, k (cm/sec)b. Seepage velocity
For a variable head permeability test, these values are given:• Length of the soil specimen 200 mm• Area of the soil specimen 1000 mm2• Area of the standpipe 40 mm2• Head difference at time t 0 is 500 mm• Head difference at time t 3 min is 300 mma. Determine the hydraulic conductivity of the soil in cm/sec.b. What was the head difference at time t 100 sec?
The results of a constant-head permeability test for a fine sand sample having a diameter of 150 mm and a length of 300 mm are as follows • Constant-head difference = 500 mm • Water collected in 5 min = 350 cm3 • Void ratio of sand = 0.61 Determine: a. Hydraulic conductivity, k (cm/sec) b. Seepage velocity
2. Situation 2 - For a constant laboratory permeability test on a fine sand, the following data are given: Length of specimen = 16 cm Diameter of specimen = 96 mm Constant Head Difference = 50 cm Volume of water collected in 4 min = 420 cc Void ratio of the soil specimen = 0.55 a. Determine the hydraulic conductivity of the soil in m/min. Round off to four decimal places. b. Determine the discharge velocity in m/min. Round off to four decimal places. c. Determine the seepage velocity in m/min. Round off to four decimal places.
For a constant head permeability test in a sand, the following values are given:• L 350 mm• A 125 cm2• h 420 mm• Water collected in 3 min 580 cm3• Void ratio of sand 0.61Determine:a. Hydraulic conductivity, k (cm/sec)b. Seepage velocity
Determine the hydraulic conductivity of Soil A using the data obtained from the constant head test and the hydraulic conductivity of Soil B using the data obtained from the falling head test.
A falling-head permeability test was carried out on a clay soil of diameter 100 mm and length150 mm. In 4 minutes the head in the standpipe of diameter 5mm dropped from 680 to 350mm. Calculate the hydraulic conductivity of this clay.
During a constant head permeability test on a sand sample, 260 x 10^3 mm^3 of water were collected in 2 minutes. If the sample had a length of 100 mm, a diameter of 40 mm and a maintained head of 200 mm. What is the coefficient of permeability in mm/s?