A machine component made of a ductile materialis subjected to a variable loading with= 50 MPa. If theOmin = - 50 MPa and aa =maxcorrected endurance limit and the yield strengthfor the material are o = 100 MPa andsafety= 300 MPa, respectively, the factor ofis

Answered: Image /qna-images/answer/c29cfa29-1a63-4bfc-8bb8-1e29ab0f61bd.jpg

A machine component made of a ductile material is subjected to a variable loading with min = - 50 MPa and amax = 50 MPa. If the corrected endurance limit and the yield strength 100 MPa and for the material are o = %3D the factor of safet

A machine component made of a ductile material is subjected to a variable loading with min = - 50 MPa and amax = 50 MPa. If the corrected endurance limit and the yield strength 100 MPa and for the material are o = %3D the factor of safet

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter7: Analysis Of Stress And Strain

Section: Chapter Questions

Problem 7.5.16P: A rubber sheet in biaxial stress is subjected to tensile stresses ax= 270 Pa ander,. = 144 Pa. The...

See similar textbooks

Related questions

Q: A cylindrical shaft made of steel of yield strength 700 MPa is subjected to static loads consisting…

A: Givenσy=700 MPaτ=σyF.S×0.58=7002.1×0.58=193 MPaM=10 kN=10000 NT=30 kN=30000 N

Q: A hollow cylindrical rod with a diameter of 100mm and a thickness of x tensile load of 12.5 kN. Find…

A: Given data:

Q: The bar shown in the following figure has a diameter of 40 mm and is subjected to a force P = 4500 N…

A: The Point A will be subjected to tensile stress due to bending stress generated by force F.bending…

Q: A steel wire is 10 meters long, hanging vertically supports a tensile load of 2000 N. Determine the…

A: Write the given data. L=10 mP=2000 Nσmax=140 MPaδ=5 mmE=200 GPa

Q: A tensile stress is to be applied along the axis of a cylindrical brass rod that has a diameter of…

A: given; diameter (d)=10mmchange in diameter (δd)=2.5*10-3mmelasticity(E)=10.1*104MPapoisson's…

Q: Bar of steel, (yield strenght Sy = 559 MPa) is subjected to the following stresses; ơX = 176 MPa ,…

Q: A carbon steel ball with 27-mm diameter is pressed together with an aluminum ba Determine the…

A: Carbon Diameter, dc = 27 mmAluminium Diameter, dA = 35 mmForce, F =11 NPoissons Ratio, 0.3…

Q: Steel railroad reels 12 m long are laid with a clearance of 2.5 mm at a temperature of 20°C. At what…

Q: Let's consider a rod having a solid circular cross-section with diameter of 6 mm and it is made of a…

Q: A cube of a material with a yield strength of 100x10° N/m*is subjectedtotheloads shown onthe right.…

Q: A circular tube is subjected to torsion by torques T applied at the ends. The bar is 0.75 m long and…

A: The length of the bar is, L=0.75 m The inside diameter of the bar is, d=35 mm The outside diameter…

Q: A hollow shaft of 25mm outside diameter and 20mm inside diameter is subjected to a tensile load of…

A: Stress: When a component or a part is subjected to any external force, a resisting force will be…

Q: Let's consider a rod having a solid circular cross-section with diameter of 6 mm and it is made of a…

Q: A closely coiled helical spring is made of 6 mm wire. The maximum shear stress and deflection under…

Q: 3. A cylindrical metal rod of 50mm diameter and 3m length is subjected to a tensile load of 150KN.…

A: Strain is the deformation in the material per unit length. True strain is the natural log of the…

Q: ick as shown in the ield strength of the 260 N/mm², and plastic moment of nape factor.

Q: Let's consider a rod having a solid circular cross-section with diameter of 4 mm and it is made of a…

Q: Determine the total deformation of the steel rod shown in figure (1) under the given loads. Take the…

Q: When the stress conditions are given as shown below, the materials are identical in all areas and…

Q: The principal stresses at a point in a critica section of a machine component are o, = 60 MPa a, =5…

A: Given:σ1=60 MPaσ2=5 MPaσ3=-40 MPaσy=200 MPa

Q: Given the shear modulus(G) for aluminum as 2.4e+10 N/m2 and the shear strain is given as 6e-5. What…

A: From hook's law Shear stress is directly proportional to shear strain within elastic limit

Q: See the set of bars for made of a material that has a yield strength of 350 MPa, determine the…

Q: A closed cylindrical vessel contains a fluid pressure of P (Mpa). The cylinder has an inside…

Q: at some point sha has à diameter a isider the croSs section of a solid and its material has a yield…

A: Given, Tension = T Vertical shear force = V

Q: A machine element is subjected to the following bi-axial state of stress; o̟ = 8O MPa; o,= 20 MPa; =…

A: Given:σx=80 MPaσy=20 MPaτxy=40 MPaτys=100 MPa

Q: A machine element is subjected to the following bi-axial state of stress; o = 40 MPa. If the shear…

A: Given:σx=80 MPaσy=20 MPaτxy=40 MPaτys=100 MPa

Q: If the length and diameter of a material is 25 cm and 10 mm respectively. Then find the elongation…

A: Given : load, W =750*103N length, L=250mm diameter,d =10mm Area,A =π/4*d2 =78.53 mm2 young modulus ,…

Q: The principal stresses at a point inside a solid object are ơ1 = 100 MPa, 02= 100 MPa and 03= 0 MPa.…

Q: A thrust collar that rests on a 0.95 in. thick polymer plate supports the vertical nylon shaft. The…

Q: Q 2: A circular rod of 15 mm diameter and 120 mm length, is subjected to 2.5 KN tensile load if the…

Q: Taking the safety factor as 2 for the loading condition shown in the figure, we can calculate the…

A: Given: d=100mm Syt = 250 MN / m2 Sys = 140 MN / m2 E = 200 GPa μ=0.3 N = 2

Q: Can you find the total deformation (mm) and strain energy values (J) at A, B, C, D,E? Shear Modulus;…

A: To find: The total deformation and strain energy values at A, B, C, D and E. Given: The shear…

Q: A bar having a circular cross section of 3 in. diameter is subjected to a torque of 100 in. # kip.…

A: Given

Q: A rod is subjected to a uniaxial load within linear elastic limit. When the change in the stress is…

A: Given data: The change in stress, σ=200 MPa. The change in strain, ε=0.001. The Poisson's ratio,…

Q: A tensile stress is to be applied along the long axis of a cylindrical rod that has a diameter of 20…

Q: B/A cylindrical piece of carbon-steel with dimension of 100 mm length and 10 mm diameter exposed to…

Q: Using the Maximum Strain Criterion, determine the uniaxial failure stress, Ox, for off-axis loading…

A: when a member of uniform cross-section is subjected to a Direct stress in one plane, then the normal…

Q: A thin spherical pressure vessel of 200 mm diameter and 1 mm thickness is subjected to an internal…

Q: Q2: A spacer is turned from Aluminum alloy with elasticity modulus of 78 GN/m². The spacer has a…

A: Given Data Modulus of spacer is : E=78 GN/m2=78000 N/mm2 Diameter of spacer is : d=28 mm Length of…

Q: The bar shown in the following figure has a diameter of 40 mm and is subjected to a force P = 1500 N…

A: Given:F=500 NP=1500 Nd=40 mmSyt=60MPaI=π64*404 =125663.70 mmStresses acting at point A:The Force…

Q: A circular shaft having a diameter of 4 in. is subjected to a torque of 250 kip # in. If the…

A: The diameter of circular shaft is D=4 in. The magnitude of torque is τ=250 kip·in. The yield stress…

Q: A steel bar with cross section of 100mm x 20mm is 450mm in length. The bar is subjected to an axial…

Q: 14. A bar of 2 m length, 20 mm breadth and 15 mm thickness is subjected to a tensile load of 30 kN.…

A: Given:- length: 2m breadth: 20mm thickness: 15 mm Load 30 KN

Q: For a steel beam loading, the maximum normal compressive stress is - 6 MPa, maximum normal tensile…

Q: xy = 210 MPa Using the Maximum Shear

A: Given Data⇒ Steel bar σx= 194 MPa σy= 100 MPaζxy= 210 MPa Maximum Shear Stress Theory

Q: Let's consider a rod having a solid circular cross-section with diameter of 4 mm and it is made of a…

Q: The steel pipe is filled with concrete is subjected to a compressive force of 80 kN. The pipe has an…

Q: A tensile stress is to be applied along the long axis of a cylindrical steel rod that has a diameter…

Concept explainers

Conduction and Convection

When energy travels from one object to another it is said to have undergone heat transfer. Heat transfer is nothing but the transfer of thermal energy or internal energy from one thing to another, like e.g., when a vessel with water, kept on top of a burner, heats up because of the flame underneath it.

Question

A machine component made of a ductile material
is subjected to a variable loading with
= 50 MPa. If the
Omin = - 50 MPa and aa =
max
corrected endurance limit and the yield strength
for the material are o = 100 MPa and
safety
= 300 MPa, respectively, the factor of
is

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step by step

Solved in 2 steps with 2 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

The hollow drill pipe for an oil well (sec figure) is 6,2 in. in outer diameter and 0.75 in. in thickness. Just above the bit, the compressive force in the pipe (due to the weight of the pipe) is 62 kips and the torque (due to drilling) is 185 kip-in. Determine the maximum tensile, compressive, and shear stresses in the drill pipe.
A metal bar AB of a weight Ills suspended by a system of steel wires arranged as shown in the figure. The diameter of the wires is 5/64 in., and the yield stress of the steel is 65 ksi. Determine the maximum permissible weight W max for a factor of safety of 1.9 with respect to yielding.
A two-story building has steel columns AB in the first floor and BC in the second floor, as shown in the figure. The roof load P:equals 400 KN, and the second-floor load P-, equals 720 kN. Each column has a length L = 3.75 m. The cross-sectional areas of the first- and second-floor columns are 11,000 mm" and 3900 mm", respectively. (a) Assuming that E = 206 GPa. determine the total shortenings aof the two columns due to the combined action of the loads Ptand P,. (b) How much additional load P0can be placed at t he top of t he column (point C) if t he total shortening: SACis not to exceed 4.0 mm?
A high-strength steel bar used in a large crane has a diameter d = 2.00 in. (sec figure). The steel has a modulus of elasticity E = 29 × 10 psi and Poisson’s ratio is v = 0.29. Because of clearance requirements, the diameter of the bar is limited to 2.001 in. when it is compressed by axial forces. What is the largest compressive load Pmaxthat is permitted?
A wine of length L = 4 ft and diameter d = 0.125 in. is stretched by tensile forces P = 600 lb. The wire is made of a copper alloy having a stress-strain relationship that may be described mathematically by =18,0001+30000.03(=ksi) in which is nondimensional and has units of kips per square inch (ksi). (a) Construct a stress-strain diagram for the material. (bj Determine the elongation, of the wire due to the Forces P. (c) IF the forces are removed, what is the permanent set of the bar? (d) If the forces are applied again, what is the proportional limit?
A steel cable with a nominal diameter of 25 mm (see Table 2-1) is used in a construction yard to lift a bridge section weighing 38 kN. as shown in the figure. The cable has an effective modulus of elasticity E = 140 GPa. (a) If the cable is 14 m long, how much will it stretch when the load is picked up? (b) If the cable is rated for a maximum load of 70 kN, that is the factor of safety with respect to failure of the cable?
Two sections of steel drill pipe, joined by bolted flange plates at Ä are being tested to assess the adequacy of both the pipes. In the test, the pipe structure is fixed at A, a concentrated torque of 500 kN - m is applied at x = 0.5 m, and uniformly distributed torque intensity t1= 250 kN m/m is applied on pipe BC. Both pipes have the same inner diameter = 200 mm. Pipe AB has thickness tAB=15 mm, while pipe BC has thickness TBC= 12 mm. Find the maximum shear stress and maximum twist of the pipe and their locations along the pipe. Assume G = 75 GPa.
An aluminum bar has length L = 6 ft and diameter d = 1.375 in. The stress-strain curse for the aluminum is shown in Fig. 1.34. The initial straight, line part of the curve has a slope (modulus of elasticity) of 10.6 × 106 psi. The bar is loaded by tensile forces P = 44.6 k and then unloaded. (a) That is the permanent set of the bar? (b) If the bar is reloaded. what is the proportional limit? hint: Use the concepts illustrated in Figs. l.39b and 1.40.
A rubber ball (sec figure) is inflated to a pressure of 65 kPa. At that pressure, the diameter of the ball is 240 mm and the wall thickness is 1.25 mm. The rubber has a modulus of elasticity E = 3,7 MPa and Poisson's ratio v = 0.48. (a) Determine the maximum stress and strain in the ball, (b) If the strain must be limited to 0.425, Find the minimum required wall thickness of the ball.
A tie-down on the deck of a sailboat consists of a bent bar boiled at both ends, as shown in the figure. The diameter dBof the bar is 1/4 in., the diameter D Wof the washers is 7/8 in., and the thickness is of the fiberglass deck is 3/8 in. If the allowable shear stress in the fiberglass is 300 psi, and the allowable bearing pressure between the washer and the fiberglass is 550 psi, what is the allowable load P allowon the tie-down?
The strength-to-weight ratio of a structural material is defined as its load-carrying capacity divided by its weight. For materials in tension, use a characteristic tensile stress obtained from a stress-strain curve as a measure of strength. For instance, either the yield stress or the ultimate stress could be used, depending upon the particular application. Thus, the strength-to-weight ratio RS/Wfor a material in tension is defined as Rs/w= in which a is the characteristic stress and 7 is the weight density. Note that the ratio has units of length. Using the ultimate stress Uas the strength parameter, calculate the strength-to-weight ratio (in units of meters) for each of the following materials: aluminum alloy 606I-T6, Douglas fir (in bending}, nylon. structural steel ASTM-A57.2, and a titanium alloy. Obtain the material properties from Tables [-1 and 1-3 of Appendix I. When a range of values is given in a table, use the average value.
A copper rod of length L = 18.0 in. is to be twisted by torques T (see figure) until the angle of rotation between the ends of the rod is 3.0°. (a) If the allowable shear strain in the copper is 0.0006 rad, what is the maximum permissible diameter of the rod? (b) If the rod diameter is 0.5 in., what is the minimum permissible length of the rod?