A hollow cylindrical rod with a diameter of 100mm and a thickness of x tensile load of 12.5 kN. Find the smallest material thickness according to the given parameters. The yield strength = 450 MPa, tensile strength = 520 MPa and the factor of safety is 2

A hollow cylindrical rod with a diameter of 100mm and a thickness of x tensile load of 12.5 kN. Find the smallest material thickness according to the given parameters. The yield strength = 450 MPa, tensile strength = 520 MPa and the factor of safety is 2

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter2: Axially Loaded Members

Section: Chapter Questions

Problem 2.5.1P: The rails of a railroad track are welded together at their ends (to form continuous rails and thus...

See similar textbooks

Related questions

Q: An aluminum alloy has a modulus of elasticity of 70 kN/mm^2 and yield strength of 275 N/mm^2…

Q: A steel rod 4m long and 20mm diameter is subjected to an axial tensile load of 45KN. Find the change…

Q: A circular rod is tested in tension to determine its material properties. When a load of P=12,000 Ib…

Q: A cylindrical specimen of some metal alloy 9.0 mm (0.3543 in.) in diameter is stressed elastically…

A: The normal stress in the specimen can be determined as,

Q: Find the tensile stress in the rod having a diameter of 25 mm subjected to a tensile load of 500 N.…

A: Given, Diameter of rod = d = 25 mm Tensile load = P = 500 N Young's modulus = E = 200 GPa = 200 x…

Q: A load is applied to a rigid bar that is symmetrically supported by three steel rods, as shown. The…

A: here the cross- section of the rod is A A= 1.2 in2 stress = 22000 psi

Q: a. A metal thickness 16mm and having a rectangular cross-section carries a load of 60KN. Find the…

Q: A steel rod 4m long and 20mm diameter is subjected to an axial tensile load of 45KN. Find the change…

Q: A copper rod of 50mm diameter is surrounded by a steel tube of 100mm external diameter, the ends…

Q: A steel bar with a maximum usage strength of 400MPa. 30kN axial tensile loads to be applied If so,…

A: Given Mximum usage strength = 400MPa Working strength = Maximum usage strength / Factor of safety…

Q: A cylindrical specimen of a steel alloy having a diameter of 12.8 mm and a gauge length of 50.8 mm…

A: Given dataFOS=2.5F=8230 NTo find the shank diameterof SQeW

Q: To support a tensile load of 65 kN, a metallic rod with a circular cross section and a length of…

Q: The % of error between a theoretical shear modulus of GPa and an experimental modulus of rigidity of…

A: Option d is correct.

Q: A bracket is designed with a pin-pin horizontal tie rod supporting a boom that is also pinned at two…

A: Given data as per question vertical load =6 KN Tensile yield strength =400 Mpa Considering FBD of…

Q: A solid cylindrical bar is subjected to tensile test. The initial diameter of the bar is 60 mm. The…

Q: Question: A hollow cylindrical rod with a diameter of ( 100 +) 10 mm and a thickness of (X +) 1 mm…

A: Given →d0 = 100+1010 = 101 mmt = X +N10 = X +1010 = X +1mmF = 12.5 kNσy = 450 MPa , σt = 520 MPaFOS…

Q: 2. A rectangular steel bar 0.5 inch thickness by 1.5 inches width and 220 ft long is subjected to a…

A: Given: Thickness of the steel bar is 0.5 in. Width of the steel bar is 1.5 in. Length of the steel…

Q: A rope 3.5 mm? breaks when a load of 50 kN is applied to it. Estimate the diameter of the same rope…

Q: circular rod of 50 mm diameter experience a tensile load of 100 N. Find the stress induced in ro

A: Given:Diameter of rod, d=50 mmTensile load, L=100 N

Q: A Steel rod has a diameter of 10 mm .The maximum allowed elastic elongation of the rod is 0.005%…

Q: See the set of bars for made of a material that has a yield strength of 350 MPa, determine the…

Q: 2. Ten point load tests are carried out on cylindrical specimens of a sedimentary rock with 30 mm…

A: The given values are as follows, If P =200kN Cross sectional Area=6000mm2 To Determine The stress…

Q: The modulus of rigidity of a material is 63KN/mm2. A rod of diameter 40mm is subjected to an axial…

A: Given data: The modulus of rigidity is, G=63 kN/mm2. The diameter of the rod is, d=40 mm. The…

Q: A cast iron rod of diameter 18 mm and length of 240 mm is subjected to a tensile load of 100 kN, and…

A: As per the given data in question, the correct option is not available in options. Please find the…

Q: If the length and diameter of a material is 25 cm and 10 mm respectively. Then find the elongation…

A: Given : load, W =750*103N length, L=250mm diameter,d =10mm Area,A =π/4*d2 =78.53 mm2 young modulus ,…

Q: A hollow cylindrical rod with a diameter of mm and a thickness of mm is under a tensile load of…

Q: A cylindrical rod of steel (E = 207 GPa) having a yield strength of 45,000 psi is to be subjected to…

Q: with a stress of 52.89 and diameter of 4cm and thickness of 2mm (P) load of 2MPa how was the…

Q: Q.3 A flat plate of width 60mm has a central hole of 10mm diameter. This plate is subjected to an…

A: Given data, Load of F= P kN =1000P N Width w= 60 mm Diameter of hole = d= 10 mm σyp= 300 MPa…

Q: In buckling experiment a steel column (E=210 Gpa) was examined in pin-fixed method. It endured a…

Q: A tensile stress is to be applied along the long axis of a cylindrical rod that has a diameter of 20…

Q: Fast

Q: A machine component made of a ductile material is subjected to a variable loading with min = - 50…

Q: A thin spherical pressure vessel of 200 mm diameter and 1 mm thickness is subjected to an internal…

Q: 8. A steel 0.6 inch x 1.2 inch steel 90 m long is subjected to a 4500 Ibs tensile load along its…

A: Given, W = 0.6 in T = 1.2 in A = 0.72 in2 L = 90 m = 3543.3 in P = 4500 lbs μ=0.3

Q: A steel specimen is subjected to a tensile force of 400 kips. If the Poisson's Ratio is 0.20, and…

Q: A spherical pressure vessel 400-mm in diameter has a uniform thickness of 6 mm. The vessel contain…

A: To Find : The Factor of safety with respect to tensile failure . Given : The diameter is D=400 mm.…

Q: a) Calculate the principal strains, given that the state of plane strain for an element is: E =…

Q: To support a tensile load of 65 kN, a circular cross section and A metallic rod with a length of…

A: Given: The tensile load, P = 65 kN The length of rod, L = 0.32 m The stress in the bar, σ = 240 MPa…

Q: A specimen of steel 20 mm diameter with a gauge length of 200 mm is tested to destruction. It has an…

Q: Q.1: Ifa material is cast iron (ultimate tensile strength = 300 Mpa, ultimate compressive strength -…

A: Data given- Ultimate tensile strength = 300 MPa Ultimate compressive strength = 900 Mpa

Q: 14. A bar of 2 m length, 20 mm breadth and 15 mm thickness is subjected to a tensile load of 30 kN.…

A: Given:- length: 2m breadth: 20mm thickness: 15 mm Load 30 KN

Q: To support a tensile load of 65 kN, a metallic rod with a cross-sectional area of Circle and a…

A: Given dataMaximum tensile load on the rod P = 65kNCross sectional area A = ?Length of the rod L =…

Q: A tensile test is peformed on a brass specimen 10 mm in diameter using a gage length of 50 mm (see…

A: Data given- P = 20 kN ∆L = 0.122 mm L = 50 mm

Q: 8- A steel bar of diameter 1 cm and length of 10 cm is made of steel with E= 200 Gpa and yield…

A: To find: The maximum tensile force. Given: The diameter of steel bar is d=1 cm. The length of steel…

Q: From the tensile stress -strain behavior for the brass specimen P the diamcter is 12-8 mm Calculate…

A: Given: The diameter of the specimen is 12.8 mm. The stress-strain diagram is shown below:

Q: What will be the elongation of a steel bar 40mm x 40mm square section when it is subjected to an…

A: Given:- Length of the steel bar (L) = 2 m = 2000 mm Modulus of elasticity of steel bar (E) = 200…

Q: Compute the tensile strength and ductility (% EL) of a cylindrical copper road if it is cold worked…

Concept explainers

Thermal Properties of Materials

In mechanical engineering, the thermal property is represented as the physical quantity that is relevant to the application of heat. The thermal properties are evaluated by variations in any specific material due to low heat or high heat. The quantities that influence the thermal property of the materials are mass, density, temperature, and many others.

Question

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 2 steps with 3 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Types of Properties of Engineering Materials

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

The rails of a railroad track are welded together at their ends (to form continuous rails and thus eliminate the clacking sound of the wheels) when the temperature is 60°F. What compressive stress ?? =6.5×10-6 /? is produced in the rails when they are heated by the sun to 120"F if the coefficient of thermal expansion a = the modulus of elasticity E = 30 × 106 psi?
Solve the preceding problem if the internal pressure is 3,85 MPa, the diameter is 20 m, the yield stress is 590 MPa, and the factor of safety is 3.0. (a) Determine the required thickness to the nearest millimeter. (b) If the tank wall thickness is 85 mm, what is the maximum permissible internal pressure?
Rigid bar ACB is supported by an elastic circular strut DC having an outer diameter of 15 in. and inner diameter of 14.4 in. The strut is made of steel with a modulus elasticity of E = 29,000 ksi. Point load P = 5 kips is applied at B. Calculate the change in length of the circular strut DC. What is the vertical displacement of the rigid bar at point B?
A high-strength steel bar used in a large crane has a diameter d = 2.00 in. (sec figure). The steel has a modulus of elasticity E = 29 × 10 psi and Poisson’s ratio is v = 0.29. Because of clearance requirements, the diameter of the bar is limited to 2.001 in. when it is compressed by axial forces. What is the largest compressive load Pmaxthat is permitted?
A wine of length L = 4 ft and diameter d = 0.125 in. is stretched by tensile forces P = 600 lb. The wire is made of a copper alloy having a stress-strain relationship that may be described mathematically by =18,0001+30000.03(=ksi) in which is nondimensional and has units of kips per square inch (ksi). (a) Construct a stress-strain diagram for the material. (bj Determine the elongation, of the wire due to the Forces P. (c) IF the forces are removed, what is the permanent set of the bar? (d) If the forces are applied again, what is the proportional limit?
A hollow cylindrical rod with a diameter of mm and a thickness of mm is under a tensile load of 12.5 kN. Find the smallest material thickness according to the given parameters. The yield strength = 450 MPa, tensile strength = 520 MPa and the factor of safety is 2. N=21
A plate having a width of 60 mm is subjected to a varying axial load of 90 KN to 45 KN. Material tests show, Sy = 280 MPa and Sn = 160 MPa. Factor of safety based on yield point is 2. Find the maximum permissible value of the thickness of this plate.
A spherical tank contains an internal pressure of 3.0 MPa, the diameter is 16 m, the yield stress is 490 MPa. and the factor of safety is 2.5. Determine the required thickness I to the nearest millimeter.
A machine component made of a ductile material is subjected to a variable loading with sigma min =-50 MPa and If the corrected endurance sigma max =50 MPa. limit and the yield strength for the material are sigma_{e} ^ prime =100 MPa and sigma_{y} = 300 MPa, respectively, what is the factor of safety ?
A tensile force of 100 kN is applied on a 0.02-m diameter and 2-m long rod. After applying the load, the diameter of the rod decreases to 0.01998 m and the length increases to2.01 m. The true axialstrain is?
To support a tensile load of 65 kN, a metallic rod with a cross-sectional area of Circle and a length of 0.32 m will be used. It is desirable that the voltage on the rod does not exceed 240 MPa, and the maximum extension is 0.42 mm. How many [m] should the minimum (minimum) Rod diameter be in these conditions? Calculate. (Take the elasticity module as 220 GPa for the metallic Rod).
You are given a square rod of 6061-T6 aluminum (cross-section = 4mm X 4mm, length = 2.3m). The material has a Young’s modulus of 72 GPa. If a tensile load of 3 kN is applied parallel to the 2.3m dimension, what is the change in length of the rod?