A manual assembly line is being designed for a product with annual demand = 100,000 s. The line will operate 50 wks/year, 5 shifts/wk, and 7.5 hr/shift. Work units will be attached continuously moving conveyor. Work content time = 42.0 min. Assume line efficiency E = , balancing efficiency Eb = 0.92, and repositioning time Tr= 6 sec. Determine: %3D %3D ) Hourly production rate to meet demand, and ) Number of workers required.

A manual assembly line is being designed for a product with annual demand = 100,000 s. The line will operate 50 wks/year, 5 shifts/wk, and 7.5 hr/shift. Work units will be attached continuously moving conveyor. Work content time = 42.0 min. Assume line efficiency E = , balancing efficiency Eb = 0.92, and repositioning time Tr= 6 sec. Determine: %3D %3D ) Hourly production rate to meet demand, and ) Number of workers required.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A 12-station transfer line was designed to operate with an ideal production rate = 50 parts/hour. However, the line does not achieve this rate, since the line efficiency E = 0.60. It costs $75/hour to operate the line, exclusive of materials. The line operates 4000 hours per year. A computer monitoring system has been proposed that will cost $25,000 (installed) and will reduce downtime on the line by 25%. If the value added per unit produced = $4.00, will the computer system pay for 270 itself within one year of operation. Use expected increase in revenues resulting from the computer system as the criterion. Ignore material costs in your calculations
A single model manual assembly line produces a product whose work content time = 48.9 min. The line has 24 workstations with a manning level M = 1.25. The product has a Available shift time per day = 8 hr, but downtime during the shift reduces actual production time to 7.6 hr on average. This results in an average daily production of 256 units/day. Repositioning time per worker Tr is 8% of cycle time Tc. Determine: Line efficiency, Balancing efficiency, and Repositioning time Tr.
Q1: Explain the significant role of Power and Free Conveyor Systems in modern manufacturing facilities. In your opinion, how the mode of control of power industrial trucks helps to handle the materials in different ways.
Three forklift trucks are used to deliver pallet loads of parts between work cells in a factory. Average travel distance loaded is 350 ft and the travel distance empty is estimated to be the same. The trucks are driven at an average speed of 3 miles/hr when loaded and 4 miles/hr when empty. Terminal time per delivery averages 1.0 min (load = 0.5 min and unload = 0.5 min ). If the traffic factor is assumed to be 0.90, availability = 100%, and worker efficiency = 0.95, what is the maximum hourly delivery rate of the three trucks?
Solve problem 17.5 but assume that m = 0.5 for all stations. Other data are the same 17.5 listed below 17.5 (a) A 10-station assembly machine has an ideal cycle time of 6 sec. The fraction defect rate at each station is 0.005 and a defect always jams the affected station. When a breakdown occurs, it takes 1.2 min, on average, for the system to be put back into operation. Determine (a) the hourly production rate for the assembly machine, (b) yield of good product (final assemblies containing no defective components), and (c) proportion uptime of the system.
Consider a line consisting of only one machine. This machine takes on average 4 minutes (te=4 min) to complete a job and Ca2=Ce2=1. The arrival rate of the parts to this machine is 1/8 part/minutes. Assume that there is enough space for only 5 parts between the machines (Hint: the buffer size, b, is 5.) Compute the expected CT of this production line. CT=_________
M3 Explain how materials, components and subassembly handling and conveyance can impact on the effectiveness and efficiency of a modern manufacturing plant
Operations processes are known to differ in terms of volume of their output. Explain thecharacteristics of high volume operations.
1- Consider the precedence relationship between the activities of an assembly line. Knowing that the cycle time (T) of the assembly line is 10, then: a) Show how the activities are assigned to the work station? b) Calculate line efficiency and smoothness indices.
By using a flat friction clutch, at 730 rpm with 30kW power a rotating electric motor will drive a work machine. Electric motor and work machine mass moments of inertia are 2.5 kgm2 and 10 kgm2, respectively. Work machine with a resistance of 380 Nm It has (load) moment. While the engine is rotating at 730 rpm, the work machine is loaded in 10 seconds Is this electric motor sufficient since it is requested to be activated? If not enough, become enough how do you get it?
Which of the following detail is obtained with bottleneck constrains in the production process? Select one: a. Maximum cycle time b. Minimum product time c. Minimum cycle time d. Maximum product time
A 30-station transfer line has an ideal cycle time of 0.75 min, an average downtime of 6.0 min per line stop occurrence, and a station failure frequency of 0.01 for all stations. A proposal has been submitted to locate a storage buffer between stations 15 and 16 to improve line efficiency. (a) Determine the current line efficiency and production rate (b)Determine the maximum possible line efficiency and production rate that would result from the new proposal. (c)Consider a new proposal to divide the line into three stages: two storage buffers located between stations 10 and 11, and between stations 20 and 21, respectively. Answer Part (b) for this proposal. (d) Now consider the original proposal. Assume that the capacity of the proposed storage buffer is to be 20 parts, and the downtime (Td = 6.0 min) is a constant. Answer Part (b) for this proposal.