A (medium) single phase transmission line 100 km long has the following constants : Resistance/km = 0-25 N; Reactance/km = 0-8 2 Susceptance/km = 14 x 10-6 siemens ; Receiving end line voltage = 66,000 V Assuming that the total capacitance of the line is localised at the receiving end alone, determine the sending end current Select one: a. 240 A b. None of The above c. 320 A d. 50 A

A (medium) single phase transmission line 100 km long has the following constants : Resistance/km = 0-25 N; Reactance/km = 0-8 2 Susceptance/km = 14 x 10-6 siemens ; Receiving end line voltage = 66,000 V Assuming that the total capacitance of the line is localised at the receiving end alone, determine the sending end current Select one: a. 240 A b. None of The above c. 320 A d. 50 A

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter5: Transmission Lines: Steady-state Operation

Section: Chapter Questions

Problem 5.11P: A 40-km, 220-kV, 60-Hz, three-phase overhead transmission line has a per-phase resistance of...

See similar textbooks

Similar questions

A 200 km, 3-phase transmission line has its conductors placed at the corners of an equilateral triangle of 2·5 m side. The radius of each conductor is 1 cm. Calculate : Inductive reactance of aline line to neutral capacitance of the line charging current per phase if the line is maintained at 66 kV, 50 Hz.
A 200 km, 3-phase transmission line has its conductors placed at the corners of an equilateral triangle of 2·5 m side. The radius of each conductor is 1 cm. Calculate : (i) line to neutral capacitance of the line, (ii) charging current per phase if the line is maintained at 66 kV, 50 Hz.
A three phase 60Hz, 120kV transmission line consisting of 3 conductors are placed at the corners of a triangle of sides 20, 15, and 8 meters. The radius of each line conductor is 1.5 cm. The length of the transmission line is 120 km. Assume epsilon subscript 0 equals 8.854 cross times 10 to the power of negative 12 end exponent. Determine d) Capacitance between the line (Cab) Answer for part 4 d) Capacitive reactance between the line( Xab) Answer for part 5 e) Charging Current for the 120 km Answer for part 6
A single-phase transmission line consisting of two conductors, the radius of each conductor is 0.4 cm, the distance between the conductors is three and half meters and the height above ground is eight meter. Determine 1)The capacitance in uF/km without effect of ground 2)The capacitance in uF/km with effect of ground
A 3 phase, 50 Hz, 150 km line has a resistance, inductive reactance and capacitive shunt admittance of 0.1Ω, 0.5Ω, and 3 x 106 S per km per phase. If the line delivers 50MW at 110kV and 0.8 pf lagging, Assume a nominal phi circuit for the line determine: a. Sending end current b. Line value of the sending end voltage c. Transmission efficiency d. Voltage regulation e. Sending end power factor
A 3-phase transmission line, 160 km long, has the following constants: Resistance/phase/km= 0.2 ohm Resistance/phase/km= 0.3127 ohm Shunt admittance/phase/km= 1.875 x 10^-6 S Determine the sending end voltage and current by rigorous method when the line is delivering a load of 25 MVA at 0.8 p.f. lagging. The receiving end voltage is kept constant at 110 kV.
A 3-phase transmission line, 160 km long, has the following constants : Resistance/phase/km = 0·2 Ω[263·574 kV ; 187·5 A]Reactance/phase/km = 0·3127 Ω Shunt admittance/phase/km = 1·875 × 10−6 SDetermine the sending end voltage and current by rigorous method when the line is delivering a load of 25 MVA at 0·8 p.f. lagging. The receiving end voltage is kept constant at 110 kV
A 300 km long 3-phase transmission line of 154 kV is operated at 60 Hz. The line is on average 1200 m above sea level and instead At 120m, an air outlet decreases by 10 mmHg. Sea free air the dose is 760 mmHg and the puncture strength of the air is 30 kV / cm As it is known, the roughness of the line is 0.89 for the average outdoor temperature of 34 oC, The distance between the conductors is 550 cm and the conductor cross section is 40mm. along the line by calculating the corona voltage and corona discharge voltage calculate the total corona loss that occurred.
please help me dont copy from google In a 250 km long, interphase voltage of 154 kV, 50 Hz three-phase transmission line, the diameter of the steel core aluminum conductors is 22 mm, the roughness coefficient of the conductors is 0.8, and the spacing between the phases is 4 m. Average air temperature along the line is 27 degrees, air pressure is 750 mm Hg. Calculate the total corona loss per phase at 1.5 times the operating voltage under these conditions (E0=21.2 kV/cm)
Line parameters of the 50 km long 34.5 kV medium voltage distribution network supply line are under 80 kW, Coso = 0.8 reverse Load; a) Draw the equivalent circuit used in modeling the transmission line. b) Draw the phasor diagram of this transmission line. c) Calculate the per line voltage value. Note: According to the length of the line, leakage permeability and capacitance values will be neglected.
A 3-phase, 420 kV transmission line consists of 1·5 cm radius conductor spaced 2 meters apart in equilateral triangular formation. If the dielectric strength of air is 30 kV (max) per cm and corona loss per km of the line is 146.91kW/phase. Take air density factor ∂= 0·952 Estimate: i. irregularity factor ii. comment on type of conductors
The length of a transmission line is (1000/3) kilometers. For this transmission line r=0.15 ohm/km x=0.8 Ohm/km y=5 * 10^-6 S/km given in the form. At the end of the line (36) MW is drawn and the end-of-line voltage is (220) kV. power factor: 0.95 (back) a. Assuming the line as a short line, calculate the VS and IS values with their angles. b. A, B, C, D by accepting the line as a mid-length line and using the "T" model approach. Calculate the parameters (Vs Is calculation is not needed) C. Calculate only parameter A, assuming the line as a long line.