please help me dont copy from google In a 250 km long, interphase voltage of 154 kV, 50 Hz three-phase transmission line, the diameter of the steel core aluminum conductors is 22 mm, the roughness coefficient of the conductors is 0.8, and the spacing between the phases is 4 m. Average air temperature along the line is 27 degrees, air pressure is 750 mm Hg. Calculate the total corona loss per phase at 1.5 times the operating voltage under these conditions (E0=21.2 kV/cm)

please help me dont copy from google In a 250 km long, interphase voltage of 154 kV, 50 Hz three-phase transmission line, the diameter of the steel core aluminum conductors is 22 mm, the roughness coefficient of the conductors is 0.8, and the spacing between the phases is 4 m. Average air temperature along the line is 27 degrees, air pressure is 750 mm Hg. Calculate the total corona loss per phase at 1.5 times the operating voltage under these conditions (E0=21.2 kV/cm)

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter4: Transmission Line Parameters

Section: Chapter Questions

Problem 4.13P: A single-phase overhead transmission line consists of two solid aluminum conductors having a radius...

See similar textbooks

Similar questions

If the per-phase line loss in a 70-km-long transmission line is not to exceed 65 kW while it is delivering 100 A per phase, compute the required conductor diameter if the resistivity of the conductor material is 1.72108-m.
Calculate the capacitance-to-neutral in F/m and the admittance-to-neutral in S/km for the three-phase line in Problem 4.18. Also calculate the line-charging current in kA/phase if the line is 110 km in length and is operated at 230 kV. Neglect the effect of the earth plane.
In terms of line-to-line capacitance, the line-to-neutral capacitance of a single-phase transmission line is Same Twice One-half
In a 250 km long, interphase voltage of 154 kV, 50 Hz three-phase transmission line, the diameter of steel core aluminum conductors is 22 mm, the roughness coefficient of the conductors is 0.8, and the spacing between phases is 4 m. Average air temperature along the line is 27 degrees, air pressure is 750 mmHg. Calculate the total corona loss per phase at 1.5 times the operating voltage under these conditions (E0=21.2 kV/cm)
A Three-Phase, 60 Hz, 230 KV Transmission Line consists of conductors of 1.6 cm radius spaced 2.5 meters at the corners of an equilateral triangle. Calculate the Corona Power Loss per km of the Three-Phase Line at a Temperature of 24ºC and Barometric Pressure of 72.6 cm of Hg. Take the Surface Irregularity Factor of the conductor as 0.94.
A Three-Phase, 50 Hz, 220 KV Transmission Line consists of conductors of 1.2 cm radius spaced 2 meters at the corners of an equilateral triangle. Calculate the Corona Power Loss per km of the line at a Temperature of 20ºC and Barometric Pressure of 72.2 cm of Hg. Take the Surface Factor of the conductor as 0.96
A 3-phase, 220 kV, 50 Hz transmission line consists of 1·2 cm radius conductors spaced 2 m at thecorners of an equilateral triangle. Calculate the corona loss per km of the line. The condition of the wireis smoothly weathered and the weather is fair with temperature of 20ºC and barometric pressure of 72·2cm of Hg
A 300 km long 3-phase transmission line of 154 kV is operated at 60 Hz. The line is on average 1200 m above sea level and instead At 120m, an air outlet decreases by 10 mmHg. Sea free air the dose is 760 mmHg and the puncture strength of the air is 30 kV / cm As it is known, the roughness of the line is 0.89 for the average outdoor temperature of 34 oC, The distance between the conductors is 550 cm and the conductor cross section is 40mm. along the line by calculating the corona voltage and corona discharge voltage calculate the total corona loss that occurred.
A 3-phase, 420 kV transmission line consists of 1·5 cm radius conductor spaced 2 meters apart in equilateral triangular formation. If the dielectric strength of air is 30 kV (max) per cm and corona loss per km of the line is 146.91kW/phase. Take air density factor ∂= 0·952 Estimate: i. irregularity factor ii. comment on type of conductors
A Three-Phase, 180 KV, 75 Hz Transmission Line consists of 1.2 cm radius conductors spaced at 2.4 meters apart in an equilateral triangular formation. If the Temperature is 40 ºC and Atmospheric Pressure is 76 cm of Hg, calculate the Corona Loss per km of the line. Take m0=0.8
Geometric mean radius of a 3-phase transmission line of 422 kV, 220 km length 22 mm dir. The roughness factor of the conductor is 0.82 and the geometric mean length between phases is 11 m. Air pressure along the line is 720 mm Hg and the temperature is 22 ° C. In this transmission line; a) - Calculate the corona voltage and the voltage at which ionization begins with impingement particles. b) - Find the total corona loss in the three phase system for the operating voltage with the Peek formula c) - Find the total corona loss for 1% increase in operating voltage.
Geometric mean radius of a 400 kV, 300 km long three-phase transmission line 20 mm. The roughness factor of the conductor is 0.82 and the geometric mean interphase length is 10 m. The air pressure along the line is 760 mm Hg and the temperature is 23 °C. In this transmission line; a)- Calculate the voltage at which ionization starts due to impact and the corona voltage. b)- Find the total corona loss in the three-phase system for the operating voltage with the Peek formula. c)- Find the total corona loss for the 10% increase in the operating voltage.