need solution A member carrying a gravity load of 75 kN including its own weight is pinned supported at A and held by a cable at B.cable35°B1.5m70°1.5m75 kNAa. Determine the force resisted by the cable, in whole decimal place (example: 50kN)b. Determine the approximate reaction resultant at A, in one decimal place (example: 50.5kN) If the frame system below is also subjected to a horizontal force of 100kN between B and C acting to the right direction, determine thefollowing:F = 300 NF¡ = 250 N 3010kNm|Am-mB5F3= 500 Na. Moment reaction at A in whole decimal place. State if counter clockwise or clockwise direction (example: 125NM (counterclockwise))b. Resultant of the reaction at A (in whole decimal place).

As per our guidelines we are supposed to do first question if multiple questions are asked., Kindly…

A member carrying a gravity load of 75 kN including its own weight is pinned supported at A and held by a cable at B. cable 35° B 1.5m 70° 1.5m 75 kN A . Determine the force resisted by the cable, in whole decimal place (example: 50KN) . Determine the approximate reaction resultant at A, in one decimal place (example: 50.5kN)

A member carrying a gravity load of 75 kN including its own weight is pinned supported at A and held by a cable at B. cable 35° B 1.5m 70° 1.5m 75 kN A . Determine the force resisted by the cable, in whole decimal place (example: 50KN) . Determine the approximate reaction resultant at A, in one decimal place (example: 50.5kN)

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Find the magnitude of the force exerted on bolt A, given:P = 100 lb, L1 = 1.4 in, L2 = 5.4 in, L3 = 12 in, L4 = 0.4 in, L5 = 1 in
Member AB is supported by a cable BC and at A by a square rod which fits loosely through the square hole in the collar fixed to the member as shown in (Figure 1). Suppose that F1 = 170 N , F2 = 440 NN and the rod holds in equilibrium. Determine the components of reaction force at A using scalar notation. Determine the components of the moment of reaction at A using scalar notation. Determine the tension in the cable.
A smooth inclined plane has a gradient of 1 in 6. Calculate the mass of a body that can be held in equilibrium on the plane by a force of 80 N when the force acts: (a) parallel to the plane answer M=49.62kg (b) horizontally answer M=48.94 kg (c) at an angle of the 20° with the plane. answer M=46.62kg
I need your help expert. The system shown below is in equilibrium. Spring 3 is known to have a change in length of 10 cm. The magnitude of the compressive force in Spring 2 is 15% more than the magnitude of force P, while the magnitude of the compressive force in Bar 1 is 100 N less than that in Spring 2. If the spring constants of Springs 2 and 3 are 625 and 1200 N/m, respectively, determine the following: a. magnitude of forces P (in N) and F (in N) b. tension (in N) in cable ABC c. mass (in kg) of Block A d. compressive force in Bar 1 e. change in length (in cm) of Spring 2 Draw the complete FBD’s of Block A, Hook C and Pulley E. (Note: Below are the final answers, kindly match your answer on this. Thank you) Answer: P = 131.2831 N, F = 87.1569 N, TABC = 110.7024 N, mA = 15.6338 kg, F1 = 50.9756 N, s2 = 24.1561 cm
Springs OA and OB are originally unstretched in a vertical position. Find the horizontal force, F, when the springs are held in the position as shown, given: k = 550 lb/ft, L1 = 0.6 ft, L2 = 1.3 ft
Two ropes in a vertical plane exert equal-magnitude forces on a hanging 150.0lb load but pull with an angle of 86.0 degree between them. What pull does each one exert if their resultant pull is 370.0lb directly upward?
9) As shown in the image below, the 89-lb crate is supported by three ropes as shown. The coefficients in the coordinates are a=4.1, b=3.6, and c=7.3. Determine the tension force in cable OA, in lb. 10) As shown in the image below, the 87-lb crate is supported by three ropes as shown. The coefficients in the coordinates are a=4.7, b=3.8, and c=7.1. Determine the tension force in cable OC, in lb. Note: Please do not use the infomation from 9 to solve 10 and/or the infomation from 10 to solve 9.
2. A ladder 12 m long leans against a vertical frictionless wall with its lower end 3 m from the wall. The ladder weighs 40 N. Find the magnitude and direction of the force exerted on the lower end of the ladder. 3. A uniform 25 N beam 6 m long is carried by two men A and B, one at each end of the beam. a) If A exerts a force of 20 N, where must a load of 45 N be placed on the beam? b) What force does B exert?
Two forces A and B are applied on an object. If force A is 15 N at 30 degrees North of East and force B is 20 N at 30 degrees West of North. Determine the magnitude and direction of a third force C to be applied on the object that will put it in equilibrium.
2. A uniform 80.0 N ladder 4.0 m long is placed against a frictionless wall with its base situated 2.0 m from the wall.Find the forces exerted by the wall and by the ground on the ladder.
Two ladders, 4.00 m and 3.00 m long, are hinged at point A and tied together by a horizontal rope 0.90 m above the floor (Fig. ). The ladders weigh 480 N and 360 N, respectively, and the center of gravity of each is at its center. Assume that the floor is freshly waxed and frictionless. (a) Find the upward force at the bottom of each ladder. (b) Find the tension in the rope. (c) Find the magnitude of the force one ladder exerts on the other at point A. (d) If an 800 N painter stands at point A, find the tension in the horizontal rope.
To determine the reaction forces at supports on a horizontal beam by using the equations of equilibrium for a static application. As shown, beam ABC is supported by the roller at A and pin at C. The geometry of the beam is given by a=2.0a=2.0 ftft, b=7.0b=7.0 ftft, and c=12.0c=12.0 ftft. The applied forces are F1=1.50F1=1.50 kipkip and F2=2.00F2=2.00 kipkip. Force F1F1 is applied at an angle θ=60∘θ=60∘ with the horizontal. Neglect the weight of the beam.(Figure 1)