A metal sheet, 2 mm thick, has been exposed to nitrogen gas at 1473 K at the flux of 1.2 x 10-6 kg/m2-s. The higher-pressure side has a concentration of 4 kg/m3. How far, in mm, from the high- pressure side will the concentration be 1 kg/m3? Assume a constant of 6 x 10-10 m2/s. Don't include the unit in your answer.

A metal sheet, 2 mm thick, has been exposed to nitrogen gas at 1473 K at the flux of 1.2 x 10-6 kg/m2-s. The higher-pressure side has a concentration of 4 kg/m3. How far, in mm, from the high- pressure side will the concentration be 1 kg/m3? Assume a constant of 6 x 10-10 m2/s. Don't include the unit in your answer.

Introductory Chemistry For Today

8th Edition

ISBN:9781285644561

Author:Seager

Publisher:Seager

Chapter7: Solutions And Colloids

Section: Chapter Questions

Problem 7.86E

See similar textbooks

Similar questions

If you mixed a solution at ARCC that was 17.5 % mass/mass of the sugar sodium and then transferred 2.00 mL weighing 3.21 g into a graduated cylinder and diluted to 10.00 mL, what mass of sodium was transferred to your new solution?
You were tasked to prepare 590 ml of 3.00 M HNO3. If you were provided a stock solution of 70.5% (w/w) HNO3 (MW = 63.0 g) with a specific gravity of 1.42, what volume of this solution (in ml) will you be using?
A student performed the experiment described in this module, using 7.00 mL of a 1.8% H2O2 solution with a density of 1.01 g mL-1. The water temperature was 20 ° C, and the barometric pressure in the laboratory was 30.02 in. Hg. After the student immersed the yeast in the peroxide solution, she collected 45.1 mL of O2. (11) Calculate the percent error for the experiment.
Calculate the mass, in gg, of 13801380 mLmL of \ce{CH4}CHX4 at STP. show work.
If 400 cc of 15% (v/v) acetic acid is mixed with 800 cc of 35% (v/v) acetic acid, what are the total volume and concentration of the mixture?
A student analysed mercury content on a canned tuna. According to EPA standard, the permissible limit of mercury in fish is 0.1 ppm. In this study, an average of 11.4 ± 2.1 ng/g was obtained based on six sample replicates. Suggest a suitable analytical instrument to be used in this analysis and draw a conclusion on the safety of mercury content of this canned tuna.
Assume that a solute has a D* of 2.03 x 10-9 m2 / Sec and that w is equal to 0.5. If landfill leachate with a chloride concentration is next to a clay liner that is 2 m thick and the concentration of chloride is 2315 mg/L, what would be the chloride concentration at the outside of the liner after 25 years of diffusion. ? ignore any effects of advection. Defining a "release" from the landfill as a concentration exceeding 1 mg/l, how long will it take for a release to occur by diffusion alone? Provide answer in years to the nearest tenth. Eg: 10.3
A student performed the experiment described in this module, using 7.00 mL of a 1.8% H2O2 solution with a density of 1.01 g mL-1. The water temperature was 20 ° C, and the barometric pressure in the laboratory was 30.02 in. Hg. After the student immersed the yeast in the peroxide solution, she collected 45.1 mL of O2. (11) Calculate the percent error for the experiment. What is the observed molar volume?
A student performed the experiment described in this module, using 4.00 mL of a 3.5% H2O2 solution with a density of 1.61 g mL-1. The water temperature was 25 ° C, and the barometric pressure in the laboratory was 30.40 in. Hg. After the student immersed the yeast in the peroxide solution, she collected 79.20 mL of O2. (7) Calculate the mass of H2O2 in 5.00 mL of the H2O2 solution.
These organic solvents are used to clean compact discs:(a) If a 15.00-mL sample of CD cleaner weighs 11.775 g at 20C, which solvent is most likely to be present?(b) The chemist analyzing the cleaner calibrates her equipment and finds that the pipet is accurate to 0.02 mL, and the balance is accurate to 0.003 g. Is this equipment precise enough to dis-tinguish between ethanol and isopropanol?
A core sample is saturated with an oil (?o = 35oAPI), gas and water. The initial weight of the sample is 224.14 g. After the gas is displaced by water (?w = 1 g/cm3 ), the weight is increased to 225.90 g. The sample is the placed in a Soxhlet distillation apparatus, and 4.4 cm3 water is extracted. After drying the core sample, the weight is now 209.75 g. The sample bulk volume, 95 cm3 is measured in a mercury pycnometer. Find the porosity, water saturation, oil saturation, gas saturation and lithology of the core sample.
Air at 25 degree celsium and 1 atm has 78% by volume N2, 21% by volume O2, and 0.05% by volume methyl ethyl ketone (MEK, CH3CH2COCH3) a) What is the concentration of each component in ppm b)What is the concentration of each in micrograms/cubic meter