A nozzle is a device for increasing the velocity of a steadily flowing fluid. At the inlet to a certain nozzle the specific enthalpy of the fluid is 3045 kJ/kg and the velocity is 70 m/s. At the exit from the nozzle specific enthalpy is 2850 kJ/kg. The nozzle is horizontal and there is a negligible heat loss from it. Determine;

A nozzle is a device for increasing the velocity of a steadily flowing fluid. At the inlet to a certain nozzle the specific enthalpy of the fluid is 3045 kJ/kg and the velocity is 70 m/s. At the exit from the nozzle specific enthalpy is 2850 kJ/kg. The nozzle is horizontal and there is a negligible heat loss from it. Determine;

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

In a centrifegal compressor air flows steadily at a rate of 2,1 kg/s and 81,00m/s with a pressure of 90kpa and specific volume of 0,85cubic meter per kilograms. The exit condtions are: speed 200m/s, pressure 900kpa and specific volume of 0,13cubic meter per kilograms. The internal energy of the air at exit is 90kj/kg greater than that of the air at inlet. Heat is loss during compressor at the rate of 95kj/s. Calculate the following; (a) power required to drive the compressor (b) Diameter of the inlet and outlet pipes?
The mass flow rate of the gas in a gas turbine is 40 kg/s. The specific enthalpy and velocity in the inlet are 1300 kJ/kg and 160 m/s respectively while the outlet are 350 kJ/kg and 50 m/s respectively. Calculate for the work of the turbine if there is a heat loss of 1000 kW. (kW)
The fluid condition at the inlet and exit of a horizontal convergent nozzle is analysed. The nozzle is operating steadily and heat loss is assumed negligible. If the specific enthalpy of fluid and velocity of fluid at the inlet are 3000kJ/kg and 220km/hr respectively. At the exit, the specific enthalpy of fluid is 2,7×10^6J/kg.Calculate (a) the velocity of the fluid at the exit of the nozzle in (m/s), (b)Determine the rate of flow of fluid (mass flow rate) when the inlet area is 0,2 m^2 and the specific volume at the inlet is 0,3m^3/kg, (c) Determine exit area of the nozzle when the specific volume at the nozzle exit is 0,6m^3/kg
A desktop computer is to be cooled by a fan whose flow rate is 0.40 m3/min. Determine the mass flow rate of air through the fan at an elevation of 3400 m where the air density is 0.7 kg/m3. Also, if the average velocity of air is not to exceed 110 m/min, determine the minimum diameter of the casing of the fan.
The fluid condition at the inlet and exit of a horizontal convergent nozzle is analysed. The nozzle is operating steadily and heat loss is assumed negligible. If the specific enthalpy of fluid and velocity of the fluid at the inlet are 3000kJ/kg and 220km/hr respectively. At the exit, the specific enthalpy of fluids is 2,7×10^6 J/kg. Determine (a) the velocity of the fluid at the exit of the nozzle in (m/s), (b) Determine the rate of flow of fluid (mass flow rate) when the inlet area is 0,2m^2 and the specific volume at the inlet is 0,3m^3/kg, (c)Determine exit area of the nozzle when the specific volume at the nozzle exit is 0,6 m^3/kg.
Air whose density is 0.078 lb/ft^3 enters the duct of an air-conditioning system at a volume flow rate of 450 CFM. If the diameter of the duct is 10 in, determine the velocity of the air in fpm at the duct inlet.
Q5: A-Steam enters a turbine with a velocity of 50m/s and specific enthalpy 2690 kJ/kg . the steam leaves the turbine with a velocity of 25 m/s and specific enthalpy 1300 kJ/kg . the heat lost tothe surroundings as the steam passes through the turbine is 25 kJ/kg .the steam flow rate is 32400kg/h determine the work output from the turbine in kilowatts. B- 0.015 m° gas at a pressure of 4.070 Kpa expands to a pressure of 0.00207 bar according to the law pV'°=C -Determine a- the final volume b- the work heat transferred during the expansion. Take (the molecular weight of the gas =24 and specific heat at constant volume =0.866 kJ/kg .K) .
In a steady flow apparatus, 135 kJ of work is done by each kg fluid. The specific volume of the fluid, pressure, and speed at the inlet are 0.37 m^3/kg, 600 kPa, and 16 m/s. The inlet is 32 m above the floor, and the discharge pipe is at the floor level. The discharge conditions are 0.62 m^3/kg, 100 kPa, and 270 m/s. The total heat loss between the inlet and discharge is 9 kJ/kg of fluid. In flowing through this apparatus, determine the specific internal energy increase or decrease in kJ/kg.
Define the energy equation of a uniformflow system reduces to that of a closed system when all the inlets and exits are closed.
Water is pumped from a lake to a storage tank 15 m above at a rate of 70 L/s while consuming 15.4 kW of electric power. Disregarding any frictional losses in the pipes and any changes in kinetic energy, determine (a) the overall efficiency of the pump–motor unit and (b) the pressure difference between the inlet and the exit of the pump.
Carbon dioxide with a density of 1.8 kg/m3having an enthalpy of 96.5 kJ/kg enters a compressor. It leaves with an enthalpy of 175 kJ/kg. There are 35 kJ/kg of heat lost from the compressor as CO2passes through it. Neglecting changes in kinetic and potential energies, determine the power in kW required for a flow rate of 0.2225 m3/s.
A steam condenser is supplied with steam, which has a specific enthalpy (calculated above 0 C) of 2-2 MJ/kg and a velocity of 70 m/s, at a rate of 2200 kg/h. The water leaving the condenser has negligible velocity and a temperature of 28°C Determine the heat absorbed by the cooling water per minute, and the required flow rate of cooling water for a temperature increase of 20 C, assuming no externalheat exchanges