A permanganate solution is prepared by dissolving 20.0123 g KMNO4 in 500 mL of distilled water and boiled for 1 hour to remove any organic material. Following sintered-glass filtration, the solution is quantitatively transferred to a 1.0 L volumetric flask and diluted to volume with distilled water. The permanganate solution was titrated against 0.1023 M oxalic acid prepared in sulfuric acid solution. A 50.00 mL aliquot of oxalic acid solution required 16.68 mL of permanganate solution. A titration blank required 0.04 mL of permanganate. What is the permanganate molarity? 3. 5 H;C204 + 2 MnO¿ + 6H* s 10 CO2 + 2 Mn²* + 8 H2O

A permanganate solution is prepared by dissolving 20.0123 g KMNO4 in 500 mL of distilled water and boiled for 1 hour to remove any organic material. Following sintered-glass filtration, the solution is quantitatively transferred to a 1.0 L volumetric flask and diluted to volume with distilled water. The permanganate solution was titrated against 0.1023 M oxalic acid prepared in sulfuric acid solution. A 50.00 mL aliquot of oxalic acid solution required 16.68 mL of permanganate solution. A titration blank required 0.04 mL of permanganate. What is the permanganate molarity? 3. 5 H;C204 + 2 MnO¿ + 6H* s 10 CO2 + 2 Mn²* + 8 H2O

Fundamentals Of Analytical Chemistry

9th Edition

ISBN:9781285640686

Author:Skoog

Publisher:Skoog

Chapter13: Titrations In Analytical Chemistry

Section: Chapter Questions

Problem 13.5QAP

See similar textbooks

Similar questions

To determine the fluoride content in an aqueous and chloride-containing preparation of ammonium fluoride, the following analysis was performed. 105.2 mg of the preparation was dissolved in 100.0 mL of water. Then a 300 mL 40 mM lead chloride solution was added, whereby all fluoride ions were precipitated out of the solution in the form of the sparingly soluble salt PbClF (s). The precipitate was separated and washed at 15 degrees with a lead fluoride chloride saturated solution and dried at 130 degrees. The precipitate weighed 651.3 mg. a) Calculate the fluoride content (as % by weight F) in the preparation.b) Determine the purity of the ammonium fluoride preparation
The solubility of borax, which is made up of sodium tetraborate (Na2B4O5(OH)4 8H2O), was analyzed. The dissolution of borax is: Na2B4O5(OH)4 • 8H2O(s) ⇌ 2 Na+(aq) + B4O5(OH)42–(aq) + 8 H2O(l) A 50 mL saturated solution was prepared. After filtration of solution, 5 mL aliquot was transferred to a flask and titrated using 0.432 M HCl. The endpoint was found to be 4.73 mL of the titrant. Tetraborate anion (B4O5(OH)42-) is a weak base which reacts with HCl like the following reaction: B4O5(OH)42–(aq) + 2 H+(aq) + 3 H2O(l) ⇌ 4 H3BO3(aq) What is Ksp expression for the dissolution? What is the tetraborate ions concentration in the filtrate? What is the molar solubility and Ksp of borax if the titration was done at room temperature (298 K)?
An impure sample of calcium carbonate with a mass of 7.95 g was reacted with 50.00 cm3 of 1.00 mol dm hydrochloric acid (an excess). The resulling solution was transferred to a volumetric flask and titrated with 11.10cm3 of 0.300 mol dm-3 sodium hydroxide solution. Determine the percentage purity by mass of the calcium carbonate sample.CaCO3 + HCl -> CaCl2 + H2O + CO2 HCl + NaOH -> NaCl +H2O a. Determine how many moles of hydrochloric acid were used.b. Determine how many moles of excess HCI was titratedc. Determine how much in moles calcium carbonate present in the sample.d. Calculate the mass of calcium carbonate presente. Determine the percentwge calcium carbonate is in the sample.
The concentration of ammonia in a cleaning product was determined by back titration.Firstly, 10.00 cm3 of the cleaning product was pipetted into a large conical flask,containing 250.00cm3 of 0.50 mol/l HCl to give Solution A.Following a period of reaction and shaking, 50.00cm3 of Solution A was removed anddiluted to 250 cm3 with water in a volumetric flask to give Solution B.20 cm3 samples of Solution B were titrated against 0.05 mol/l Na2CO3 solution, givingan average titre of 12.45 cm3. i) Write equations for the reactions that have taken place.ii) Determine the concentration of NH3 in the original cleaning product in mol/l,g/l, ppm, and % w/v.
A sample of an iron ore was prepared for Fe3+ analysis as following: 3.4g of the sample was added anddissolved in acid environment then diluted to 250 mL using volumetric flask. After that, 10 mL of the resultingsolution was transferred by pipet to a 50-mL volumetric flask and continue to be diluted. The scientists foundout that this solution gives the concentration of Fe3+ as 2.3 mg/L. Find the weight percentage of Fe3+ in theoriginal sample.
A scientist was tasked to extract Fe from an aqueous suspension that contains 106 g of Fe2O3. The following steps detail the transformation of Fe2O3 (aq) to elemental iron: I. Enough sulfur trioxide gas was bubbled to Fe2O3 aqueous suspension to completely yield ferric sulfate. II. Then, 5.00 M nitric acid was added to ferric sulfate yielding an aqueous solution of ferric nitrate. III. Excess magnesium powder was added to the aqueous solution of ferric nitrate precipitating the solid iron ----- a. Write the balanced chemical reaction and the type of chemical reaction for [I], [II], [III]. Do not forget to indicate the states of the reactants and products (s, l, g).(CHOICES: COMBINATION, SINGLE DISPLACEMENT, DOUBLE DISPLACEMENT) b. What is the final mass of iron? Express final answers in 3 significant figures. c. High-concentration HCl is supposed to be added at the last part of the procedure. Briefly state its purpose.
A Medical Technology student was given a capsule of a multivitamins and she was asked to determine the % by mass (w/w) of ascorbic acid present in the capsule. The student analyzed the 2.001 g sample using volumetric titration. The following data was generated in the analysis: KIO3 + 5KI + 6H+ → 3I2 + 6K+ + 3H2O C6H8O6 + I2 → C6H6O6 + 2I- + 2H+ Table 1. Standardization of KIO3 Molarity of Ascorbic Acid Standard Solution 0.03542 M Volume of Ascorbic Acid 25.00 mL Volume of KIO3 8.70 mL Molarity of KIO3 ______________M Table 2. Determination of Ascorbic Acid Concnetration Initial burette reading, KIO3 0.00 mL Final burette reading, KIO3 33.60 mL Volume consumed, KIO3 33.60 mL MM of Ascorbic Acid 176.12 g/mole choices 7.30% 30.1% 33.6% 32.5%
The arsenic in a 1.203-g sample of a pesticide was converted to H3AsO4 by suitable treatment. The acid was then neutralized, and 40.00 mL of 0.05871 M AgNO3 was added to precipitate the arsenic quantitatively as Ag3AsO4. The excess Ag+ in the filtrate and in the washings from the precipitate was titrated with 9.63 mL of 0.1000 M KSCN, and the reaction was. Find the percentage of As2O3 in the sample.
Method of separation/chemical reaction (with the brief process) of 3 KG's OF SODIUM BORATE AND 1.5 KG's HYDROCHLORIC ACID
A 25.00mL wastewater sample was analyzed for its Mg2+ content using a standard gravimetric method. the sample was diluted to 3.00L and an 11.00mL aliquot was treated to precipitate magnesium as MgNH4PO4.6H2O using (NH4)2HPO4 as the precipitating agent. the precipitate was then filtered, washed, dried, and ignited resulting in a 0.1325mg Mg2P2O7 residue. How much Mg (in ppm) is present in the original sample
Suppose you have a soil that is made up of 10% organic matter with CEC = 200 cmol/kg, 40% kaolinitewith CEC = 10 cmol/kg, and 50% vermiculite with CEC = 100 cmol/kg.1- Calculate the overall CEC of the soil by taking a weighted average of the three soil components.2- What percentage of the overall CEC is contributed by the organic matter? How does that numbercompare to the 10% of the soil itself that is organic?
Calcium fluoride is considered as a relatively insoluble compound and therefore lime or slakedlime has been considered as a possible material to remove excess fluoride in water of boreholesin certain parts of the country. The solubility product of CaF2 is Ksp = 3 x 10 – 11 and that ofCa(OH)2 isKsp =8x10-61. How much lime can be added to the water to remove 10 mg of F- ion per litre ofborehole water?(The atomic masses are Ca: 40.08; F: 19.00; O: 16; H: 1)