A pipe made of wood staves is 150 mm internal diameter and subjected to internal pressure of 1 MPa . Determine the maximum spacing of steel hoops having cross sectional area A,= 180 mm² and oa = 100 MPa

A pipe made of wood staves is 150 mm internal diameter and subjected to internal pressure of 1 MPa . Determine the maximum spacing of steel hoops having cross sectional area A,= 180 mm² and oa = 100 MPa

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter5: Stresses In Beams (basic Topics)

Section: Chapter Questions

Problem 5.8.1P: The shear stresses t in a rectangular beam arc given by Eq. (5-43): in which Fis the shear force, /...

See similar textbooks

Related questions

Q: Air is pumped into the steel thin-walled pressure vessel at C. If the ends of the vessel are closed…

A: Write the given data.

Q: Determine pressure in [kPa] in the cylindrical pressure vessel shown, if the measured hoop strain is…

A: Given, εhoop=500×10-6E=70 GPa=70×109 Paμ=0.33Ri=400 mm=400×10-3 mmt=6 mm=6×10-3 mm Internal diameter…

Q: 4. The shaft below is hollow from A to B and solid from B to C. Determine the maximum shear stress…

A: Given:D=80 mmd=80-2*td=80-20 =60 mm

Q: A stainless-steel thick-walled cylinder with inner and outer radii (b and a) of 225 mm and 350 mm,…

Q: When filled to capacity, the unpressurized storage tank shown contains water to a height of h- 21…

Q: The gas tank is made from A-36 steel and has an inner diameter of 1.50 m. If the tank is designed to…

A: Given : Diameter of tank = 1.5 m Factor of safety = 1.5 Solution : From the maximum shear stress…

Q: The propellers of a ship are connected to an A-36 steel shaft that is 60 m long and has an outer…

Q: 1. Neglecting transverse shear effect show the maximum moments and determine omax = (16/TD³)(M, +…

A: Given dataDiameter of the rod = DTo show the maximum moments and determine the maximum stress is…

Q: The cylindrical air tank is made of 0.5-inch-thick rectangular plates 12 ft welded together as…

A: Given Data⇒ Cylindrical air tank Thickness(t)=0.5 in Allowable normal stress σ=12 ksiσ=12×103 Psi…

Q: A spherical gas tank has an inner radius of r = 1.5 m. If it is subjected to an internal pressure of…

A: Given: The internal pressure in the tank is p=300 kPa. The inner radius of the spherical tank is ri…

Q: The spherical gas tank is fabricated by bolting together two hemispherical thin shells of thickness…

Q: The A-36 steel tubular shaft is 2 m long and has an outer diameter of 50 mm. When it is rotating at…

A: Given data as per question Length of tubular shaft = 2 m Outer diameter = 50 mm Power transmission =…

Q: Reqd: Determine e of A relative to D Gs = 12 x 10° psi MN Ib ft 1000 Ib ft 900 Ib ft 2-in. diame SN…

A: The simplified diagram of the shaft is as shown below,

Q: Determine the vertical displacement of plate A due to shear deformations in the rubber. The…

A: Cross sectional area of shoe=(35mm X 25mm)Now,Shear stress on plate A,τ=(502)N(35mm X…

Q: The thin-walled pipe has an inner diameter of 4 in. and a wall thickness of 0.1 in. If it is…

Q: The steel water pipe has an inner diameter of 12 in. and a wall thickness of 0.25 in. If the valve A…

A: Given Data: The inner diameter of the pipe is d = 12 in. The thickness of the pipe is t = 0.25 in.…

Q: When filled to capacity, the unpressurized storage tank contains water to a height of h = 49 ft. The…

A: To find: The maximum normal stress and maximum shear stress. Given: The height of water in the tank…

Q: Ssure of the tank if the 8. An acetylene tank consists of a cylindrical body flat at its base and a…

A: Dear student, as per the given data there is no correct option. Please find the attached solution.

Q: Determine the normal stress and shear stress acting on the inclined plane AB. Sketch the result on…

A: Given figure, The normal stress in x direction is €x=500 kpa Shear stress Txy=0,

Q: The spherical gas tank is fabricated by bolting together two hemispherical thin shells. If the 8-m…

A: Given Spherical gas tankInner diameter , d=8m ; bolt dia=25 mmGange pressure , P=2MPa∵σallowable…

Q: The steel pipe is filled with concrete and subjected to a compressive force of 15 kN and an increase…

Q: Determine the normal stress in a ball, which has an outside diameter.of 180 mmand a wall thickness…

Q: When filled to capacity, the unpressurized storage tank contains water to a height of h = 27 ft. The…

A: Givenh=27ftd=8.2ftt=0.861 in =0.07175 ftγ=62.4/ft3

Q: Determine the normal stress in a ball, which has an outside diameter of 180 mm and a wall thickness…

A: As per given question Gage pressure =66mpa Wall thickness =4.6 mm Outside diameter =180 mm We have…

Q: The shaft is subjected to a distributed torque along its length of t = (10x2) N # m>m, where x is…

Q: 2. A brass sleeve with an inner diameter of 200mm and an outer diameter of 300mm is pressed onto a…

A: Given DataP=16.8MPaEb=110GPavb=0.32Es=210GPavs=0.30r=100+δmmdi=200mmdo=300mm

Q: A pressurized spherical tank is to be made of 12-mm-thick steel. If it is subjected to an internal…

A: Given: The thickness of the steel is t=12 mm. The internal pressure of the tank is p=1.4 MPa. The…

Q: The shaft is used to transmit 30 hp while turning at 600 rpm. Determine the maximum shear stress in…

A: The value of power transmitted is 30 hp. Convert the power from hp to Watt by multiplying with 746.…

Q: The resulting stress distribution along section AB for the bar is shown. From this distribution,…

Q: e inner diameter of the AB compressed air tank is 160mm, the wall thickness is 1mm.Since the…

Q: An 8 mm thick steel plate has an outside diameter of 600 mm and a length of 3 m. The plate is…

Q: An oil pipeline is made from steel with a diameter of 50 cm and a thickness of 7 mm. If the oil is…

A: Given:- D=50 cm t=7mm P=8 MPa FOS=1.5 To find:- Maximum allowable stress,σ

Q: The cylindrical pressure vessel has an inner radius of 1.25 m and a wall thickness of 15 mm. It is…

A: According to the given condition We have the stress along its longitude as…

Q: The cylindrical pressure tank is made of 10 mm steel plate. The dimensions shown are internal. The…

Q: A pressure-vessel head is fabricated by welding the circular plate to the end of the vessel as…

A: Average shear stress can be determined by using equilibrium condition in y direction

Q: The cylinder of a hydraulic ram is 20 cm internal diameter. Determine the thickness required to…

Q: The steel pipe of length L = 541 mm is filled with concrete and subjected to a compressive force P =…

Q: The spherical gas tank is fabricated by bolting together two hemispherical thin shells of thickness…

A: Given t=30mm P=2.5MPa D=8m=8000mm n=900 d=20mm

Q: The thin-walled pipe has an inner diameter of 1.2 cm and a thickness of 0.06 cm. If it is subjected…

A: Determine the axial and hoop tension as follows.

Q: The diaphragm of a pressure transducer is to be designed to withstand a maximum pressure of 400…

Q: Determine the change in the volume of a 10 cm diameter copper sphere that is subjected to a…

Q: A 500 mm pulley running at 400 rpm drives another pulley of the same diameter by means of a 12 mm…

Q: [Ans. 1.2 MPa] PROBLEM 7.99 A spherical gas container made of steel has a diameter of 5.4 m and a…

Q: The steel pipe is filled with concrete and subjected to a compressive force of 75 kN. Determine the…

Q: The inner diameter of the AB compressed air tank is 160, the wall thickness is 1.Since the manometer…

Q: If the rectangular block is shown in Fig. is subjected to a uniform pressure of p = 20 psi,…

Concept explainers

Pressure Vessels

The term pressure vessel refers to a closed container that contains gas or liquid at a different pressure than environment pressure. The pressure vessels have a wide scale of applications in our day-to-day lives and other industrial places. Some common examples of pressure vessels are gas cylinders, autoclaves, compressor vessels, etc.

Question

A pipe made of wood staves is 150 mm internal diameter and subjected to internal
pressure of 1 MPa. Determine the maximum spacing of steel hoops having cross
sectional area A= 180 mm? and oa = 100 MPa

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step 3

VIEW

Step by step

Solved in 3 steps with 5 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

The inner diameter of the AB compressed air tank is 160mm, the wall thickness is 1mm.Since the manometer pressure in the tank is 1,6MPa ,at point a at the top of the tank maximum normal stress and determine the maximum plane shear stress.(c=16mm , d=38mm, e =32mm, g=160mm, h=1mm, k =1.6MPa , F=160N)
Consider a tube having a rectangular cross-section as shown below. The tube is subject to two twisting moments of 70 N - m . Determine the average shear stress developed at point A. The tube is fixed at the other end. a) 1.75 MPa b) -1.65 MPa c) 4.086 MPa d) 2.095 MPa
Determine the normal stress in a basketball of 9.5-in. outer diameter and 0.125-in. wall thickness that is inflated to a gage pressure of 9 psi.
Determine the maximum shear stress (in ksi). AT = 654 lb ft Diameter =3.7 in J =1.5in4 G = 11,000 ksi
A cylindrical pressure vessel is fabricated from steel plating that has a thickness of 20 mm. The diameter of the pressure vessel is 450 mm, and its length is 2.0 m. Determine the maximum internal pressure that can be applied if the longitudinal stress is limited to 140 MPa, and the circumferential stress is limited to 60 MPa.
A spherical gas tank has an inner radius of r = 1.5 m. If it is subjected to an internal pressure of p = 300 kPa, determine its required thickness if the maximum normal stress is not to exceed 12 MPa.
The propellers of a ship are connected to an A-36 steel shaft that is 60 m long and has an outer diameter of 340 mm and inner diameter of 260 mm. If the power output is 4.5 MW when the shaft rotates at 20 rad>s, determine the maximum torsional stress in the shaft and its angle of twist.
A spherical gas tank has an inner radius of r = 1.5 m. If it is subjected to an internal pressure of p = 420 kPa, determine its minimum required thickness if the maximum normal stress is not to exceed 12 MPa.
A cylindrical propane tank has an outside diameter of 3.25 m. If the allowable hoop stress is 100 MPa and the allowable axial or longitudinal stress is 45 MPa, determine the minimum thickness of the pipe when the internal pressure that can be applied to the tank is 1.25 MPa.
The shaft is subjected to a distributed torque along its length of t = (10x2) N # m>m, where x is in meters. If the maximum stress in the shaft is to remain constant at 80 MPa, determine the required variation of the radius c of the shaft for 0 ≤ x ≤ 3 m.
an acetylene tank consists of a cylindrical body flat at its base and hemisphere at the other end . the thickness of the metal used in tank is 2mm. the tank has a diameter of 250 mm and 1200 mm long. what is the internal pressure of the tank if the allowable stress of the material is 180MPa a. 3.5 kPa b. 6.8 kPa c. 4.2 kPa d. 5.5 kPa
Consider a tube having a rectangular cross-section as shown below. The tube is subject to two twisting moments of 70 N - m . Determine the average shear stress developed at point A. The tube is fixed at the other end. a) 1.75 MPa b) -1.65 MPa c) 4.086 MPa d) 2.095 MPa If your doing it fast, I will rate you...