A piston cylinder assembly containssteam. Initially, the specific internalenergy (internal energy per unit mass)is equal to 2800 kJ/kg. The steamundergoes a process during which 90kJ of heat is transferred to the steam.On the other hand, using a specificmechanism installed in the cylinder,20 kJ of energy are transferred to thesteam by work. If 10 kJ of heat isdissipated from the steam to theoutside of the cylinder through thewall of the cylinder, Determine thework done by the steam on the piston.The specific internal energy at thefinal state is equal to 2500 kJ/kg. Themass of the steam is 7.7 kg.Select one:a. 2410 kJO b. 1450 kJc. 1893 kJd. 1650 kJ

Answered: Image /qna-images/answer/c7cff307-6cd8-4309-bada-15fc37d68023.jpg

Answered: A piston cylinder assembly contains…

A piston cylinder assembly contains steam. Initially, the specific internal energy (internal energy per unit mass) is equal to 2800 kJ/kg. The steam undergoes a process during which 90

Principles of Heat Transfer (Activate Learning with these NEW titles from Engineering!)

8th Edition

ISBN:9781305387102

Author:Kreith, Frank; Manglik, Raj M.

Publisher:Kreith, Frank; Manglik, Raj M.

Chapter2: Steady Heat Conduction

Section: Chapter Questions

Problem 2.39P: The tip of a soldering iron consists of a 0.6-cm- diameter copper rod, 7.6 cm long. If the tip must...

See similar textbooks

Related questions

Q: A piston-cylinder assembly contains water that undergoes a series of processes. Process 1-->2:…

Q: 1. Ethane, initially at 35 kPa with a volume of 0.12 m³, is compressed frictionlessly in a cylinder…

Q: Determine the work done by a 1 kgm fluid system as it expand slowly in a closed system from p1 =…

Q: Air enters a compressor at 105 Pa and 35°C having volume of 1.7 m3/kg and is compressed to…

A: Given data as Initial Pressure (P1)= 105 Pa Initial Temperature (T1)= 35°C…

Q: Initially, a rigid tank contains 500L of water at 300°C. By volume, the tank contains60% liquid and…

Q: A vertically arranged piston-cylinder assembly with a mass and area of a piston given as 55 kg and…

Q: A vertically arranged piston-cylinder assembly with a mass and area of a piston given as 44 kg and…

A: Data given-

Q: (4) A mass of 3 kg of R-134a fill a piston-cylinder device with and initial volume of 0.279 m³ at a…

A: Refrigerant R-134a, also known as 1,1,1,2-tetrafluoroethane, R-134a, Freon 134a, Forane 134a,…

Q: Air undergoes a constant pressure process at 690 kPa with initial volume of 0.657 cubic meter to a…

Q: A piston cylinder assembly contains steam. Initially, the specific internal energy (internal energy…

A: Given Data The initial internal energy is: u1=2800 kJ/kg. The Final internal energy is: u2=2500…

Q: The heat transfer of gas during the process, in kJ. (2) The velocity of the piston at the final…

Q: A gas undergoes a process in a piston-cylinder assembly during which the pressure-specific volume…

A: Given data as per question Mass of gas =0.4 lb P1 =160 lbf/in2 V1 =1 ft3 P2 =480 lbf/in2 Heat…

Q: A reservoir contains 2.83 cubic meters of CO at 6895 kPa and 23.6 degrees C. A cylindrical tank with…

Q: 1. Determine the work done by 1-kg fluid system as it expands slowly within the piston-cylinder…

Q: 0.5 kg of an ideal gas undergoes an isentropic process from 657 kPa gage and a volume of 0.017 cubic…

Q: 2. Initially, a rigid tank contains 500L of water at 300°C. By volume, the tank contains60% liquid…

A: Given: The volume of rigid tank, V = 500 L = 0.5 m^3 The temperature of water, T = 300°C The…

Q: Five kilograms of water, initially a saturated vapor at 100 kPa, are cooled to saturated liquid…

Q: A vertically arranged piston-cylinder assembly with a mass and area of a piston given as 54 kg and…

A: Patm =92 KPaW = 54 kgQ= -1.95 KJm=3.1 gV1=0.0042 m3u1 =602 KJ/KgV2=0.0021 m3R=8.314 KJ/Kg-K

Q: Air must be compressed in a well-insulated piston cylinder from a volume of 6.4 litres to a volume…

Q: How much work, in kJ, can a spring whose spring constant is 3 kN/cm produce after it has been…

A: Given: The compression of the spring is x=3 cm. The spring constant is k=3 kN/cm.

Q: During the expansion of a gas in piston-cylinder the relation between the pressure and the volume is…

A: Given data: Polytropic process with polytropic index (n) = 1.2 Initial pressure (P1) = 500 kPa…

Q: c) As shown in Figure A1-c, a gas is contained in a piston-cylinder assembly. The mass and the…

Q: A gas in a piston-cylinder assembly undergoes a process for which the relationship between pressure…

Q: A closed system of constant volume experiences a temperature rise of 20°C when a certain process…

A: Given: Temperature rise T2-T1=20·C The heat transferred Q=18 KJ specific heat at constant volume…

Q: A gas contained in a vertical cylindrical tank has a volume of [10 + (30/100)] m³. The gas receives…

Q: Q8: 100 g of water is heated from 30 °C to 50 °C. Ignoring the slight expansion of the water, the…

A: Given, Mass of water = m = 100 g = 0.1 kg Initial temperature = T1 = 30 oC Final temperature = T2 =…

Q: Helium steadily enters a pipe with a mass flow rate of 8 kg/s at 427°C and 100 kPa and leaves the…

A: Given: The mass flow rate of the helium is m=8 kg/s. The pressure of the helium is P=100 kPa. The…

Q: A piston–cylinder device with a free-to-move piston initially contains 0.4 kg of air gas at 160 kPa…

Q: A piston cylinder assembly contains steam. Initially, the specific internal energy (internal energy…

A: Given: The specific internal energy of steam, u1 = 2600 kJ/kg The heat given to the steam, Q = 90 kJ…

Q: _____________systems are a system in which the mass and energy remains constant.

A: A thermodynamic system is a body of matter and/or radiation confined by walls in space with certain…

Q: A typical adult breathes 0.5 L of air with each breath and has 25 breaths/min. At 101.325 kPaa and…

A: Given:-Volume of air(v)=0.5 L=0.5×10-3 m3P1=101.325 kPaT1=22°CT2=-10°Ck=1.4R=0.287 08 kJ/kg-K To…

Q: A piston-cylinder container contains 14 lbm of refrigerant 134a at 180 psia with an internal energy…

Q: 2 kg of saturated water at 69.7 C undergoes a process during which the temperature increases to 120…

A: Given, mass of water = 2 kg initial temperature T1 = 69.7 C final temperature T2 = 120 C pressure P…

Q: Ethane, with a mass of 1.68 kg, is contained in a piston cylinder and expands isentropically from…

Q: A 75-m-high water body that is open to the atmosphere is available. The mechanical energy of this…

A: Given: The height of the water body is H=75 m.

Q: 17. Ethane, with a mass of 2.13 kg, is contained in a piston-cylinder and expands isentropically…

Q: A piston-cylinder contains gas initially at 3500 kPaa with a volume of 0.03 m². The gas is…

Q: Air expands in a gas turbine from 550okPa to 102kPa. The expansion obeys the law pv1.27 = C the…

Q: A piston/cylinder device loaded with a linear spring initially contains saturated liquid water at…

A: Heat is a form of energy that is transferred from one body to another as a result of change in…

Q: 7. Determine the work done by a 1 Kgm tluid system as it expand slowly in a closed system from P=…

Q: 14. Air is contained in a piston - cylinder arrangement. The following data were gathered: P= 700…

Q: Assume 8 lb of a substance receive 240 Btu of heat at constant volume and undergo a temperature…

A: Given Data m=8 lb Q=240 BTU ∆T=150°F

Q: For a system having a mass of 1 lb whose velocity increases from 50 ft/s to 100 ft/s while its…

A: Given Mass = 1 lb Distance = 50 ft to 100 ft Elevation 40 ft Acceleration due to gravity = 32 ft/s…

Q: The force required to expand the gas in a gas spring a distance x is given by F = Constant ________…

A: work=∫0.10.3Cxkdxwork=C1-kx1-k|0.30.1work=1.87 KJ

Q: A piston-cylinder assembly contains water that undergoes a series of processes. Process 1-->2:…

A: Since you have asked multiple questions, we will solve the first question for you. If you want any…

Q: the specific volume of water at 2000 kPa and 220 °C 0.1100 m./kg 0.01005 m/kg 0.1022 m/kg 0.131061…

A: Given P= 2000 KPa T=220 degree C From steam table (Saturated water ) First table go for Pressure…

Q: 21.313 kg per second of water at 0.03398675 kbarg and internal energy of 15000 kW is heated at…

Concept explainers

Work and Heat Transfer

It is generally related to thermal engineering which tells about the use, creation, conversion and transfer of heat energy between the systems. It is also considered that to transfer heat from one source to another, transfer of masses is also required. There are various mechanisms by which, transfer of heat takes place i.e. thermal conduction, convection, radiation or by change of phase. All these mechanisms have their own specific features which sometimes occur simultaneously within the same system.

Question

A piston cylinder assembly contains
steam. Initially, the specific internal
energy (internal energy per unit mass)
is equal to 2800 kJ/kg. The steam
undergoes a process during which 90
kJ of heat is transferred to the steam.
On the other hand, using a specific
mechanism installed in the cylinder,
20 kJ of energy are transferred to the
steam by work. If 10 kJ of heat is
dissipated from the steam to the
outside of the cylinder through the
wall of the cylinder, Determine the
work done by the steam on the piston.
The specific internal energy at the
final state is equal to 2500 kJ/kg. The
mass of the steam is 7.7 kg.
Select one:
a. 2410 kJ
O b. 1450 kJ
c. 1893 kJ
d. 1650 kJ

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step by step

Solved in 2 steps with 1 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

A turbine operating under steady-flow condition receives steam at the following state: pressure,13.8bar; specific volume 0143 m3 /kg, and velocity 30m/s. The state of the steam leaving the turbine is as follow: pressure 0.35 bar, specific volume 4.37 m3/kg and velocity 90 m/s. The difference in elevation is negligible. Heat is rejected to the surrounding at the rate of 0.25 kW, the turbine develops 103kW of power and the rate of steam flow through the turbine is 0.5 kg/s. Calculate the change in internal energy of the steam
A piston-cylinder device initially contains CO2 at 200 kPa and 400°C and the total enclosed volume is 300 litres. Due to heat loss, the piston moves downwards to a position where it sits on a pair of stoppers and its final enclosed volume is 150 litres. Further heat loss leads to the pressure being reduced to 160kPa. Workout 1) the final temperature, 2) the total work done by CO2 and 3) the total heat transferred to CO2. Also make some comments on the result of heat. 4) Create a schematic p-v diagram of the process The following assumptions are to be made: CO2 is a perfect gas and its molecular mass is 44kg/kmol. The ratio of specific heat capacities, γ (gamma) is 1.3 The volume occupied by the stoppers is to be ignored. There is no leakage in the system There is no friction between the cylinder and piston walls and the piston moved slowly at the same speed therefore, no acceleration. For the conversion from Celsius to Kelvin, use 273 Use 8314.5 J/kmol.K for the universal gas constant
QU3a). An ice block at -12 oC, and of mass 3kg is completely converted into steam at 120 oC. Determine the heat involved in the process. Is the heat absorbed or released?[ shc of ice =2100 J/Kg/K ; shc of water = 4200J/Kg/K; lv=2260KJ/Kg ; lf =336000J/Kg ; shc of steam =2000J/Kg/K ]
A steam engine isentropically expands 12.905 kg/s of steam from 0.68 MPa, 220°C. The exhaust is dry and saturated. (a) Determine the work of a steady flow process in kW. (b) Determine the work of a nonflow process in kW
The thermal effiency of a general heat engine is 35 percent, and it produces 60 hp. At what rate is heat transferred to this engine, in kJ/s?
A steady state flow compressor draws in 14170 li/min of air whose density is 1.267 kg/m3 and discharge it with density of 4.88 kg/m3. At the suction, P1-103.42 kPa, at the discharge, p2=551.584 kPa. Thge increase in specific internal energy is 78.45 kJ/kg and the heat from air by cooling is 30.173 kJ/kg. Neglecting the change of potential and kinetic energy, determine the work done on the system in kJ/min.
A pressure cooker containing some water has an internal energy of 300 kJ. If 0.5 kg of steam with an enthalpy of 1800 kJ/kg escapes through the safety valve, what is the work necessary for the steam to escape the pressure cooker?
A compressor draws in 500cfm of air whose density is 0.079 lb/ft3 and discharges it with a density of 0.304 lb/ft3. At the suction , p1 = 15 psia; at discharge , p2= 80 psia. The increase in the specific internal energy is 33.8Btu/lb, and the heat form the air by cooling is 13 Btu. Neglecting changes in potential energy and kinetic energy, determine the work done on the air in BTu/min and Hp.
Seventy kilojoules of work is done by each kilogram of fluid passing through an apparatus under steady-flow conditions. In the inlet pipe, which is located 30m above the floor, the specific volume is 3m^3/kg, the pressure is 300 kPa and the velocity is 50 m/s. In the discharge pipe, which is 15 m below the floor, the specific volume is 9 m^3/kg, the pressure is 60 kPa, and the velocity is 150 m/s. Heat loss from the fluid is 3 kJ/kg. Determine the change in internal energy of the fluid passing through the apparatus.
Heat in the amount of 7.5 kJ is added to a closed system while its internal energy decreases by 12 kJ. How much energy is transferred as work? For a process causing the same change of state but for which the work is zero, how much heat is transferred?
Water, initially a saturated liquid at 100°C, is contained in a piston-cylinderassembly. The water undergoes a process where it changes to the corresponding saturatedvapor state, during which the piston moves freely in the cylinder. If the change of state isbrought about by heating the water as it undergoes an internally reversible process atconstant pressure and temperature, determine the (a) work and (b) heat transfer per unitmass, each in kJ/kg.
The boiler of a steam generator has a total volume of 2 m3, and initially contained 1.5 m3 of water and 0.5 m3 of steam in balance at 1 kgf/cm2. The home is turned on and the water and steam from the boiler are heated. Somehow, the inlet and outlet valves of the boiler were left closed, and the safety valve will open when the pressure reaches 56 kgf/cm2. How much heat is transmitted to the water and steam in the boiler before the safety valve opens?