A piston-cylinder device initially contains steam at 200 kPa, 250 °C, and 0.4 m². In this state, a linear spring (Fax) touches the plunger, but exerts no force on it. Then, heat is slowly transferred to the steam, causing its pressure and volume to increase, up to 250 kPa and 0.55 m², respectively. Represent the process on the P-v and T-v diagrams with respect to saturation lines, and determine: 1) the properties of state 1 (T; P; Vi; u; h; s. 2) the properties of state 2 (T2: P2, V2, uz, h, s. 3) The change of: specific volume, internal energy, enthalpy, entropy. 4) the work done by the steam. 5) the total heat transferred. Agua 225 kPa o

A piston-cylinder device initially contains steam at 200 kPa, 250 °C, and 0.4 m². In this state, a linear spring (Fax) touches the plunger, but exerts no force on it. Then, heat is slowly transferred to the steam, causing its pressure and volume to increase, up to 250 kPa and 0.55 m², respectively. Represent the process on the P-v and T-v diagrams with respect to saturation lines, and determine: 1) the properties of state 1 (T; P; Vi; u; h; s. 2) the properties of state 2 (T2: P2, V2, uz, h, s. 3) The change of: specific volume, internal energy, enthalpy, entropy. 4) the work done by the steam. 5) the total heat transferred. Agua 225 kPa o

Refrigeration and Air Conditioning Technology (MindTap Course List)

8th Edition

ISBN:9781305578296

Author:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Publisher:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Chapter11: Calibrating Instruments

Section: Chapter Questions

Problem 4RQ: Temperature-measuring instruments may be designed to measure the temperature of vapors, ________,...

See similar textbooks

Similar questions

A 6-m³ tank contains helium at 400 K and is evacuated from atmospheric pressure to a pressure of 740 mm Hg vacuum. Determine (a) mass of helium remaining in the tank, (b) mass of helium pumped out, (e) the temperature of the remaining helium falls to 10°C. What is the pressure in kPa?
7. In a sturdy closed container with a volume of 0.3m ^ 3, there is a wet steam of 300 kPa in pressure. When the total mass is 4 kg, calculate the mass and volume of liquid and water vapor, respectively. What is the pressure in the vessel when heated to 300C? P-v diagram or T-v diagram should be shown and the corresponding status and process should be indicated.
The fixed volume container contains 7.5 kg air at 22ºC temperature and 140 kPa pressure. Air is added to the container until the pressure is 250 kPa and the temperature is 37ºC. What is the mass of air added to the container? A-3,845 kgB-1,267 kgC-5,246 kgD-2,56 kgE-4,223 kg (Note: This question is Turkish) orginal question: Sabit hacimli kapta 22ºC sıcaklık ve 140 kPa basınçta7.5 kg hava bulunmaktadır. Basınç 250 kPa ve sıcaklık 37ºC olana kadar kaba hava eklenmektedir. Kaba eklenen hava kütlesi nedir?
Water in a rigid container with a pressure of 2000 kPa and temperature of 700°C is in what state and volume?
In geothermal power plants, the temperature and pressure of the liquid coming out of the separator is around 160oC and 8 bar. Determine the appropriate pressure gauge for these conditions in order to produce accurate and reliable measurements.
Air is contained in a piston-cylinder arrangement with an initial volume of 0.02 m³ and at an initial temperature of 77°C. In this state, a manometer installed in the system is 400 kPa. Heat is added in the amount of 42 kJ and work is done by a paddle wheel until the temperature reaches 527°C. If the pressure is kept constant, how much work of the paddle wheel should be added to the gas? Consider the properties of the gas as constants; take the system is well thermally insulated. (RAr~0.2870 kJ/kg - K).
Measuring the drop in pressure with a manometer as a function of temperature within a sealed container filled with an ideal gas provides a technique to show that the magnitude of "zero absolute temperature" or OK corresponds to -273 °C. If this experiment is conducted, starting at 1 atm and 67 °C, instead of in boiling water, what will the pressure be, in mmHg, when cooled to 0°C?
a) How does the final temperature of the gas compare with its initial temperature? (Tc/Ta) b)How much heat does the air exchange with its surroundings during the process abc? Express your answer in joules. Does it absorb or release heat? c) If the air instead expands from state a to state c by the straight-line path shown, how much heat does it exchange with its surroundings?
During processing in a steel mill, a 375kg steel casting at 800 degrees is quenched by plunging it into a 500-gal oil bath, which is initially 75 degrees . After the casting cools and the oil bath warms , what is the final tempertature of the two? The weight per unit volume of the oil is 7.5 lb/gal.
A 5L rigid container contains Acetylene initially at gage pressure and temperature of 100 KPa and 300 K, respectively. Because of the leaks in the fittings of the vessel, the gage pressure dropped to 80KPaand the temperature decrease to 200K, determine the mass of the Acetylene that leaked out.
HELP ME WITH THIS THERMODYNAMIC PROBLEM Subcooled water at the pressure of 10 MPa and temperature of 100°C is heated at a constant pressure process to the temperature 200°C. If the mass of water is 5 kg (a closed system), determine the work and heat transfer in the process: Using compressed liquid water property table. Using saturated water property table (approximation). Using incompressible substance equations (note that in an incompressible fluid, the volume does not change).
Air is compressed in a compressor through the purely polytropic, purely isothermal, and intercooling as shown in the diagram between the same pressure limits. Select the process that is purely isothermal_____________ A. 1-X'-2' B. 1-X-X'-2 C. 1-X-2"