At the instant shown, link CD rotates with an angular velocity of Ww = 8.5 rad/s. If it is subjected to a couple moment M = 340 N·m, determine the magnitude of reaction force developed in link AB. The block has a mass of 50 kg and center of mass at G. Neglect the mass of links AB and CD. (Hint, since the mass of link AB or CD is negligible, the external force or moment acting on it sums up to 0.) Please pay attention: the numbers may change since they are randomized. Your answer must include 1 place after the decimal point, and proper unit. Take g = 9.81 m/s². 0.1 m 0.4 m 0.4 m G Your Answer: Answer B D 0.6 m units A M C

At the instant shown, link CD rotates with an angular velocity of Ww = 8.5 rad/s. If it is subjected to a couple moment M = 340 N·m, determine the magnitude of reaction force developed in link AB. The block has a mass of 50 kg and center of mass at G. Neglect the mass of links AB and CD. (Hint, since the mass of link AB or CD is negligible, the external force or moment acting on it sums up to 0.) Please pay attention: the numbers may change since they are randomized. Your answer must include 1 place after the decimal point, and proper unit. Take g = 9.81 m/s². 0.1 m 0.4 m 0.4 m G Your Answer: Answer B D 0.6 m units A M C

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Just like the change in momentum over time generates a force (P=F) , the change in ∆t angular moment results in a torque (L = τ) . Using the theoretical values for the moments∆tof inertia of the hollow cylinder and disk, determine the torque done on the system whenthe cylinder is dropped on the disk. Take ωi = 9.5 rd/s, ωf = 6.1 rd/s, and ∆ t = 2 s
The uniform 140-lblb beam is initially at rest when the forces are applied to the cables. Set FAFAF_A = 70 lblb and FBFBF_B = 190 lblb .(Figure 1) Determine the magnitude of the acceleration of the mass center at this instant. Determine the angular acceleration of the beam at this instant.
The disk, which has a mass of 40 kg, is subjected to the couple moment of M = (2θ + 6) N m, where θ is in radians. If it starts from rest, determine its angular velocity when it has made two and a half revolutions.
The bar AB is uniform and has a mass of 50.0 kg. At the moment shown, the rod has an angular velocity of 4.00 rad/s and spring is stretched by 0.30 m. The force constant of the spring is 25.0 N/m.a) Determine whether or not the bar will reach the horizontal position.b) If the bar becomes horizontal, calculate its angular velocity at that position. If not, calculate the angle the bar makes with the horizontal when it comes to rest momentarily.
The homogeneous cylinder A has a mass of 80 kg, and the mss of the hub can be neglected. The magnitude of the variable force P, is in newtons when t is in sec- onds. The velocity of body B changes from 2 m/s downward when t = 0 to 4 m/s downward t = 5 s. Determine the mass of B. Solve all questions using Impulse and Momentum methods
A smooth can C, having a mass of 5 kg, is lifted from a feed at A to a ramp at B by a rotating rod. The rod maintains a constant angular velocity of θ˙ = 0.5 rad/s, Neglect the effects of friction in the calculation and the size of the can so that r=(1.2cos⁡θ)m. The ramp from A to B is circular, having a radius of 600 mm. (a) Determine the magnitude of the force which the rod exerts on the can at the instant θθ = 30∘∘. Express your answer to three significant figures and include the appropriate units.
The rod AB has a mass of 20 kg，the mass of the piston A and B are both 5kg. Piston B is attached to a spring of constant k = 1200 N/m. The spring is un-stretched when θ = 0. If the rod is released from rest whenθ = 45° Please find÷ (1) the moment inertia of the rod AB about its mass center G (2)The angular velocity of rod AB at θ = 0° (3）the velocity of piston A at θ = 0° (4) the velocity of Piston B at θ = 0° (hint: regard the piston A, B, rod as a system, during the motion, except the spring, the weight of rod AB, the weight of pistonB also does work). g = 9.8 m/s2
The uniform thin pole has a weight of 50 N and a length of 26m. If it is placed against the rough wall and on the rough box in the position d = 10 m, µs = 0.3 at points A, B and C P= 150 NBox weight = 100 N Determine the distance x when the motion of the pole impend
The T-shaped body of total mass m = 6.5 kg is constructed of uniform rod. If it is released from rest while in the position shown, determine the vertical force reaction at O as it passes the vertical position (124° after release). The distance b is 1.04 m.
The velocity of the 8-kg cylinder is 0.3 m∕s at a certain instant. The speed v after dropping an additional 1.5 m is 2.5 m/s. The mass of the grooved drum is 12 kg, its centroidal radius of gyration is k = 210 mm, and the radius of its groove is ri = 200 mm. The frictional moment at O is a constant 3 N∙m. Find the frictional force.
The uniform plate of mass m rotates about its corner O with the angularspeed ω. Determine the angular momentum of the plate about (a) the mass center;(b) the corner O; and (c) the corner A.
The assembly weighs 10 lblb and has a radius of gyration kGkGk_G = 0.60 ftft about its center of mass GG. The kinetic energy of the assembly is 25 ft⋅lbft⋅lb when it is in the position shown. (Figure 1) If it rolls counterclockwise on the surface without slipping, determine its linear momentum at this instant.