A plain sedimentation tank with a length of 20 m, width of 10 m and a depth of 3 m is used in watertreatment plant to treat 4 million litre of water per day (4 MLD). The average temperature of water is 20°C.The dynamic viscosity of water is 1.002 × 10-3 N-s/m? at 20°C. Density of water is 998.2 kg/m3. Averagespecific gravity of particles = 2.65. Assume, particles is removed completely.Surface overflow rate in the sedimentation tank isParticles of diameterum are removed completely

Answered: Image /qna-images/answer/7bf0b619-ba13-4d6a-9c06-62e7251280e2.jpg

A plain sedimentation tank with a length of 20 m, width of 10 m and a depth of 3 m is used in water treatment plant to treat 4 million litre of water per day (4 MLD). The average temperature of water is 20°C. The dynamic viscosity of water is 1.002 × 10-3 N-s/m² at 20°C. Density of water is 998.2 kg/m³. Average specific gravity of particles = 2.65. Assume, particles is removed completely. Surface overflow rate in the sedimentation tank is Particles of diameter µm are removed completely

A plain sedimentation tank with a length of 20 m, width of 10 m and a depth of 3 m is used in water treatment plant to treat 4 million litre of water per day (4 MLD). The average temperature of water is 20°C. The dynamic viscosity of water is 1.002 × 10-3 N-s/m² at 20°C. Density of water is 998.2 kg/m³. Average specific gravity of particles = 2.65. Assume, particles is removed completely. Surface overflow rate in the sedimentation tank is Particles of diameter µm are removed completely

Fundamentals of Geotechnical Engineering (MindTap Course List)

5th Edition

ISBN:9781305635180

Author:Braja M. Das, Nagaratnam Sivakugan

Publisher:Braja M. Das, Nagaratnam Sivakugan

Chapter6: Hydraulic Conductivity

Section: Chapter Questions

Problem 6.8P

See similar textbooks

Similar questions

A silt particle with a density of 2500 kg/m3 and terminal settling velocity (vs) of 1.9 m/hr is entering a rectangular sedimentation basin which has a depth (H) of 4 m. The entire flow rate of 21000 m3/day has to flow through the basin. The temperature of operation is 20C and the density of water at this temperature is 998 kg/m3 and the viscosity is 0.001 kg m-1 s-1. Note: Volume of a rectangular basin = L x W x H.1) What is the size of the particle?2) What will be the volume of the rectangular sedimentation basin needed to remove the particle from the water, assuming 100% removal?
A concrete dam retains water to a height of 9 m. It has rows of sheet piling at both heeland toe which extend half way down to an impervious stratum. From a flow net sketchedon a transformed section, it is found that there are four flow channels and sixteen headdrops. The average horizontal and vertical permeabilities of the soil are 6 × 10^–3 mm/sand 2 × 10^–3 mm/s, respectively. What is the seepage in cubic meter per day, if the lengthof the dam is 150 meters?
The hydraulic conductivity of a homogeneous sandy/gravelly aquifer is 3 x 10-2 cm/sec. The hydraulic gradient (groundwater surface slope) of the phreatic (water table) aquifer is 0.009 and the aquifer's effective porosity is 0.28. Calculate the following : The average velocity of dissolved salt (travels at same speed as groundwater). Enter your answer in meters/year, to the nearest whole meter/year.
H2 = 0.3’ h = 1.25’ H1 = 0.2’ d = 1.5” H = 0.5’ D = 4” Ksand = 0.000075 ft/min Ksilt = 0.0038 ft/min Determine: Determine the total flow of water q. Find the equivalent permeability for the soil.
The section size of a water pipe is (100cm Χ 100cm), three types of soils A, B, and C are placed in the pipe, and a fixed amount of water is injected into the top left tap to keep the water head difference between the left and right ends of the pipe 60cm. The three soil permeability coefficients are k_A = 0.05 cm/sec , K_B = 0.1 cm/sec, k_C = 0.001 cm/sec, please calculate the following values:(1) The fixed amount of water injected into the faucet on the upper left (cm3/hr)(2) What is the total water head consumed by each of the three soils of A, B, and C (cm)(3) The overall volumetric seepage force of water flowing through the three soils (kN/m3)
For a falling head permeability test, these valueare given: Length of the soil specimen = 200 mm Area of the soil specimen = 1000 mm2 Area of the standpipe = 40 mm2 Head difference at time, t = 0 min is 500 mm Head difference at time, t = 3 min is 300 mm1. Determine the hydraulic conductivity of thesoil in cm/sec.2. What was the head difference at time, t =100 sec?
The following were the monthly evaporation data in cm in certain year (Jan.-Dec.) in the vicinity of a lake: The water spread area in the lake in the beginning of January was 3.2 km2 and at the end of December 2.6 km2 . Calculate the loss of water in million m3 due to evaporation in that year. Assume a pan coefficient of 0.71.
For a falling-head permeability test, the following values are given: Length of specimen = 200 mm Area of soil specimen = 1000 mm^2 Area of standpipe = 40 mm^2 Head difference at time t = 0 = 500 mm Head difference at timt t = 3 minutes = 300 mm Determine the hydraulic conductivity of the soil in ×10−4cmsec Please answer this asap. For upvote. Thank you very much
Determine the coefficient of permeability in mm/s from the following data:Length of sand sample = 25 cm;Area of cross section of the sample = 30 cm2; Head of water = 40 cm; Discharge = 200 ml in 110 s a.0.3788 b.0.750 c.0.106 d.1.23 x 10^(-2)
A rectangular sedimentation tank is designed with a depth of 3.5 m and a detention time of 1 h. Is the design sufficient to achieve com-plete removal of particles with a diameter of 0.01 mm? Specific grav-ity of the particles is 2.65. The flow rate and temperature of water are 10,000 m3/d and 20°C, respectively. At 20°C, density of water is 998 kg/m3 and dynamic viscosity of water is 10–3 kg/m · s. State any assumptions you make to calculate your results.
ANSWER THE FOLLOWING QUESTION. SHOW COMPLETE SOLUTION. H = 1.98 Hydraulic conductivity of soil E is 0.002 m/s.
A rectangular sedimentation tank has dimensional proportions of 10:1:3 (L:W:H). If sedimentation is done in batch, the tank can cater 1080 m^3 in one hour, while the detention time for a continuous settling is 15 minutes on the same tank. a) During batch sedimentation, how many batches is done in an hour? b) Solve the dimensions of the tank. c) If the critical settling velocity is 0.003m/s, how many percent of the solids will be settled down? d) If the influent has a solids concentration of 230 mg/L and the effluent is 90% of the influent, compute the solids concentrations both at the underflow and the overflow. e) Determine the filter area if the filter loading rate is 2.3 gal/d.ft. ANSWER D AND E I PROVIDED SOME INFORMATION THANK YOU!