A plastic beam has a cross section with dimensions of a = 2.3 in., b = 8.1 in., d = 4.6 in., and t = 0.6 in. The centroid is located c = 1.941 in. above the bottom surface of the beam, and the moment of inertia of the shape about the z centroidal axis is lz = 33.131 in. 4. For a shear force of V = 2100 lb, what is the maximum shear stress in the beam? y 1 (tyр.) d V b Answer: Tmax = i psi

A plastic beam has a cross section with dimensions of a = 2.3 in., b = 8.1 in., d = 4.6 in., and t = 0.6 in. The centroid is located c = 1.941 in. above the bottom surface of the beam, and the moment of inertia of the shape about the z centroidal axis is lz = 33.131 in. 4. For a shear force of V = 2100 lb, what is the maximum shear stress in the beam? y 1 (tyр.) d V b Answer: Tmax = i psi

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

A beam with length L is FIXED at both ends. It is loaded with a concentrated force P at L/3 from the first support. (a) Draw the Loading Diagram. (b) Determine the deflection at midspan, EI is constant. (c) If the beam is made of steel, what is its elastic modulus? (d) If the beam has a length of 10 meters, cross section of 200x200mm, and force P is 10 kN, what is the deflection at midspan (in millimeters)?
A plastic beam has a cross section with dimensions of a = 3.8 in., b = 13.3 in., d = 7.6 in., and t = 1 in. The centroid is located c = 3.214 in. above the bottom surface of the beam, and the moment of inertia of the shape about the z centroidal axis is Iz = 247.59 in. 4. For a shear force of V = 1750 lb, what is the maximum shear stress in the beam?
vertical bar is loaded with axial loadsat points B, C, and D, as shown in the figure. Thebar is made of steel with a modulus of elasticityE = 29,000 ksi. The bar has a cross-sectional area of8.24 in2. Calculate the displacements at points B, C,and D. Ignore the weight of the bar.
A 10 m long beam has 2 supports at point A and B. The beam is pinned at Support A and supported by a roller at Support B. It is carrying a car at middle of the beam. Discuss the results and explain the stress of this beam. Provide your opinion on the effect of the beam when the centroid of the vehicle is shifted to 3m away from Support B. Mass of car is given 1660kg. Please calculate shear force and moments for 0 ≤ X ≤ 5m and 5 < X ≤ 10m in first case and also for 0 ≤ X ≤ 7m 7 ≤ X ≤ 10m when the vehicle is shifted to 3m away from Support B. Using equilibrium i.e. force and moment equilibrium must be sa tisfied for each component, determine the forces or/and moments. List all assumptions that are Draw the free-body diagrams for the Draw the shear force and bending moment diagrams for each
Write the stiffness matrix corresponding to the degrees of freedom 1, 2, and 3 of the continuous beam shown in Figure P16.2.
Block on a rough surface weighing 400 N Angle of internal friction is 21.8⁰. Solve for the force P required to impend motion if the force is applied to block horizontally.
The inverted T-beam supports the concentrated loads shown in Figure. Determine the following: What is the location of the neutral axis relative to the bottom of the beam? What is the moment of inertia of the beam section with respect to the NA? What is the maximum positive moment in the beam (in terms of P)? What is the maximum negative moment in the beam (in terms of P)? What is the maximum allowable value of P in order not to exceed a flexural stress of 4ksi in compression? What is the maximum allowable value of P in order not to exceed a flexural stress of 10ksi in tension? What is the maximum allowable value of P for this beam such that it will not fail by bending?
If the allowable bending stress is σ = 247 MPa, find the magnitude of the maximum internal bending moment Mz that can be supported by the beam. The moment of inertia about the z axis is 402,238,667 mm4.
The T-shaped beam shown above is supporting a concentrated load P at its free end. The beam has an allowable bending stress of ?????? = 250 MPa and an allowable shear stress of ?????? = 100 MPa. a) Determine the distance to the neutral axis (?̅), second moment of area (?), and the section modulus (?) of the cross-section.b) Draw the shear force diagram (SFD) and bending moment diagram (BMD) of the beam. On your diagrams, express the values of shear and moment in terms of the applied load P.c) Determine the maximum value of P such that bending failure will not occur.d) Determine the maximum value of P such that shear failure will not occur.e) Based on your answers to (c) and (d), what is the maximum load P that can be applied to the beam? Is this beam bending or shear governed?
where, bf1= 260 bf2 = 120 tf = 25 tw = 16 d1 = 160 d2 = 110 1. Calculate the location of the neutral axis from the bottom of the beam in mm. 2. Compute for the moment of inertia in 1x10^6 mm^4. 3. What is the value of in kN/m, considering flexural stress in tension? 4. What is the value of in kN/m, considering flexural stress in compression? 5. What is the statical moment of area (Q) in 1x10^3 mm^3 ? Use three decimal places. 6. What is the value of in kN/m, considering shear stress at the welded section? 7. What is the safest value of in kN/m? Use three decimal places.
Given the figure below. Use UNIT LOAD METHOD in determining the maximum deflection at midspan. E and I are constant. 1. What is the reaction at A of the real beam? 2. In constructing the virtual beam and determining the maximum deflection, where must be the 1-unit load be placed? 3. What is the reaction at the support of the virtual beam? 4. In solving the maximum deflection at midspan, how many portions or segments must the beam be divided so that the real and virtual loadings are continuous in each segment? 5. Consider segment AB of the real beam, with x measured from A, what is the moment equation M_(AB ) ? 6. In question 4, what are the limiting values of x? 7. Consider segment AB of the virtual beam, with x measured from A, what is the moment equation? 8. Analyzing segment BC of the real beam, with x measured from A, what is the moment equation M_BC? 9. In the given beam, if the 50 KN load is moved 2m closer to A and deflection at midspan is desired, how many segments must the…
Figure 1a shows a simply supported beam, AB of length L = 5.6 m, with a uniform distributed load of w = 4.5 kN/m. The shear force diagram is shown below the beam and the cross-section in Figure 1b. The cross section has a constant thickness t = 8.7 mm, the width of the flange is b = 217.5 mm and height of the web is d = 211.41 mm. 1. Determine the position of the neutral axis. 2. Determine the moment of inertia about the neutral axis