A plastic box is sitting on a steel beam. One end of the steel beam is slowly raised, increasing the angle of the surface until the box begins to slip. If the box begins to slip when the beam is at an angle of 41 degrees, what is the static coefficient of friction between the steel beam and the plastic box? 41°

A plastic box is sitting on a steel beam. One end of the steel beam is slowly raised, increasing the angle of the surface until the box begins to slip. If the box begins to slip when the beam is at an angle of 41 degrees, what is the static coefficient of friction between the steel beam and the plastic box? 41°

Physics for Scientists and Engineers: Foundations and Connections

1st Edition

ISBN:9781133939146

Author:Katz, Debora M.

Publisher:Katz, Debora M.

Chapter14: Static Equilibrium, Elasticity, And Fracture

Section: Chapter Questions

Problem 64PQ: A One end of a metal rod of weight Fg and length L presses against a corner between a wall and the...

See similar textbooks

Similar questions

A block of wood is resting on a level surface. If the coefficient of friction between the block and the surface is 0.30, how much can the plane be inclined without causing the block to slide down?
A 26.8 kg box sits on a ramp at an angle of 13° above the horizontal. If the coefficient of static friction between the box on the ramp is 0.215, what minimum applied force is required to keep the box at rest?
The static friction coefficient between the block and the inclined surface is 0.2. What is the minimum force that should be applied to the block perpendicular the surface in order to prevent the block from sliding down?
A 90-m wire is suspended between two points at the same elevation that are 60 m apart. Knowing that the maximum tension is 300 N, determine (a) the sag of the wire, (b) the total mass of the wire.
One end of a uniform meter stick is placed against a vertical wall. The other end is held by a lightweight cord that makes an angle ? with the stick. The coefficient of static friction between the end of the meter stick and the wall is 0.400. When theta = 15.0o , how large must the coefficient of static friction be so that the block can be attached 0.100 [m] from the left end of the stick without causing it to slip?
An aluminum block is placed at rest on an inclined plane that is made of steel. Once released, the block remains at rest on the incline. The coefficients of static and kinetic friction between aluminum and steel are 0.61 and 0.47 respectively. The aluminum block has a mass of 3.45 kg and the incline makes an angle of 12.5° relative to the horizontal. What is the magnitude of the static frictional force between the block and incline?
A man weighing 400 N climbs up a ladder 5 meters long. The ladder initially rests against a frictionless vertical wall and at 58 degrees above a rough floor with static friction coefficient of 0.25. Determine the location of the man that will cause the ladder to slide down. What is the magnitude and direction of the net force acting on the ladder at the floor?
Oceanographers use submerged sonar systems, towed by a cable from a ship, to map the ocean floor. In addition to their downward weight, there are buoyant forces and forces from the flowing water that allow them to travel in a horizontal path. One such submersible has a cross-section area of 1.3 m2, a drag coefficient of 1.2, and, when towed at 5.1 m/s, the tow cable makes an angle of 30° with the horizontal. What is the tension in the cable?
A 240-kg uniform steel beam 7.75 m in length rests against a frictionless vertical wall, making an angle of 60.0° with the horizontal. A 72.0-kg construction worker begins walking up the beam. The coefficient of static friction between the beam and the ground is 0.750. What are the horizontal and vertical forces exerted on the beam by the ground when the worker has walked 3.00 m along the beam? (Enter the magnitude.) fhorizontal= fvertical=
A telephone pole is supported by a guy wire which exerts a pull of 300 N on the top of the pole. If the angle between the wire the pole is 60 degrees, what is the vertical component of the pull on the pole?
A uniform box is placed in a position along the inclined plane which makes an angle θ from the horizontal. Coefficient of static friction µ = 0.4. What should be the maximum value of angle θ so that the box would remain at rest?
Calculate the ratio of the drag force on a jet flying at 999 km/h at an altitude of 8.10 km to the drag force on a prop-driven transport flying at half that speed and altitude. The density of air is 0.490 kg/m3 at 8.10 km and 0.725 kg/m3 at 4.05 km. Assume that the airplanes have the same effective cross-sectional area and drag coefficient C.