A public utility is planning to construct a high head hydroelectricfacility. The approximate cost for large facilities is $3000 USD perkWe installed. The utility is considering two options, a 600 MWefacility that would operate at a 70% capacity factor or an 800 MW.facility that would operate at a 65% capacity factor. If electricity issold for $0.13 per kWh, estimate the payback period for theadditional infrastructure costs for the larger facility. Ignore the costrecovery factor and operating costs.

A public utility is planning to construct a high head hydroelectric facility. The approximate cost for large facilities is $3000 USD per kW, installed. The utility is considering two options, a 600 MWe facility that would operate at a 70% capacity factor or an 800 MWe facility that would operate at a 65% capacity factor. If electricity is sold for $0.13 per kWh, estimate the payback period for the additional infrastructure costs for the larger facility. Ignore the cost recovery factor and operating costs.

A public utility is planning to construct a high head hydroelectric facility. The approximate cost for large facilities is $3000 USD per kW, installed. The utility is considering two options, a 600 MWe facility that would operate at a 70% capacity factor or an 800 MWe facility that would operate at a 65% capacity factor. If electricity is sold for $0.13 per kWh, estimate the payback period for the additional infrastructure costs for the larger facility. Ignore the cost recovery factor and operating costs.

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter2: Fundamentals

Section: Chapter Questions

Problem 2.31P: Consider two interconnected voltage sources connected by a line of impedance Z=jX, as shown in...

See similar textbooks

Similar questions

When we talk about massive energy generation by more traditional methods, such as hydroelectric and thermoelectric plants, it is inevitable to think about environmental aspects and the entire chain involved so that the energy generated in a locality is taken to the large consumer centers. Seeking to improve this context, microgrids emerged, which can act in isolation or connected to the National Interconnected System. For consumers, the main advantages are the medium-term savings and the environmental issue. For the distributor, the impacts of microgrids are:AlternativesAlternative 1:Practically non-existent, as current equipment is efficient from an energy point of view and is digitally connected, improving the operation of the network as a whole. Alternative 2:Technical and environmental, as the consumer stops buying energy from the distributor, and the generation and transmission infrastructure becomes obsolete, generating waste for the environment. Alternative 3:Exclusively…
Estimate the AEP for a 3-MW wind turbine in a wind regime that has a CF= 30%. For this turbine explain why the increase of wind speed to levels greater than 25 m/s generates less electrical power compared to wind speeds around 11 m/s
Please answer the following points in detail and rigorously. Instead ofresort to formulas, develop from basic principles (laws ofvoltages and currents, definition of electrical power, properties ofphasors, among others) d) Show that the complex power consumed by two elements in parallel is the sum of the individual complex powers. After, repeat the procedure but for two elements in series. e) What meaning would you give to the P consumed by an element? Which to Q? f) Suppose you know P and Q for a two-terminal element. What is the power factor of this element? When would i be in early and when behind? g) Suppose you know the equivalent resistance R and the reactance X equivalent of a two-terminal passive network. What is the factor power of red bliss? When would I be in advance and when in backwardness?
In practical terms, explain the implications of the inverse relationship that exists between power and capacity of energy production systems.
Niagara Falls, Ontario has attracted tourists from all over the world since even the early 19th century. The Sir Adam Beck hydroelectric generating stations diverts water from the Niagara and Welland rivers upstream from the falls themselves and releases it into the Niagara River to produce up to 2000 MW of output power. According to the World Energy Council, the average Canadian household uses about 11MWh per year of electricity. Using these given data, estimate how many Canadian households can be powered by the Sir Adam Beck stations each year. (Assume the power station is running at full capacity of 2000 MW, 24 hours a day and 365 days a year). Question 5 options: 867,000 1.5 million 93,100 181
Please answer the following points in detail and rigorously. Instead ofresort to formulas, develop from basic principles (laws ofvoltages and currents, definition of electrical power, properties ofphasors, among others) a) Suppose that between the two terminals of an element there is a voltage v (t) and that through the terminal marked with a positive sign a current i (t). Show that if v (t) and i (t) are sinusoidal and are out of phase an angle θ, then the active power P which is consumed by this element is proportional to cosθ. b) How much is P for a pure inductor and how much for a capacitor pure? Does this make physical sense? c) When the power factor seen between two terminals is specified, Why is it necessary to indicate whether it is late or early? d) Show that the complex power consumed by two elements in parallel is the sum of the individual complex powers. After, repeat the procedure but for two elements in series. e) What meaning would you give to the P consumed by an…
Incremental fuel costs in dollars per megawatthour for a plant consisting of two units are given by:dC(P)/dP = 0.0080 P1 + 8.0dC(P)/dP = 0.0096 P2 + 6.4Assume that both units are operating at all times, that total load varies from 250 to 1250 MW, and that maximum and minimum loads on each unit are to be 625MW and 100MW respectively. Find the incremental fuel cost and the allocation of load between units for the minimum cost of various total loads.Write your answers in the given format below.
Discuss the concept of power system stability and the factors that influence it.
smart grid: creating a more resilient and flexible power grid that can integrate distributed energy sources and respond to changing demand. Describe how this problem will affect the world in 100 years
Explore the concept of smart grids in modern power systems. How do smart grids enhance efficiency, reliability, and sustainability in the generation and distribution of electricity?
Explain the concept of distributed energy resources (DER) aggregation and its role in optimizing power generation from renewables.
You want to buy electric energy. You can buy from company A, B, C, or D,but you must choose only one. You obtain past data on these four suppliers, and you then determinethat the prices for some of them have been quite volatile, influenced by the state of the economy(recession, stagnation, and inflation). You assess this data given in the table below. Assuming that you simply want to minimize your average costs over the long run, determine theexpected costs for all energy suppliers. Select the supplier based on minimum expected cost.