i need the answer quickly Q9) A raft is constructed of wood having a density of 600 kg/m3. Its surface area is 5.7 m2, and its volume is 0.6 m²When the raft is placed in fresh water as in Figure 5, to what depth h is the bottom of the raft submerged?AFig. 5: A raft partially submerged in water.

Givendensity of the wood ρw=600 kg/m3surface area A=5.7m2volume V=0.6m3

9) A raft is constructed of wood having a density of 600 kg/m. Its surface area is 5.7 m2, and its volume is 0.6 m When the raft is placed in fresh water as in Figure 5, to what depth h is the bottom of the raft submerged? A

9) A raft is constructed of wood having a density of 600 kg/m. Its surface area is 5.7 m2, and its volume is 0.6 m When the raft is placed in fresh water as in Figure 5, to what depth h is the bottom of the raft submerged? A

International Edition---engineering Mechanics: Statics, 4th Edition

4th Edition

ISBN:9781305501607

Author:Andrew Pytel And Jaan Kiusalaas

Publisher:Andrew Pytel And Jaan Kiusalaas

Chapter1: Introduction To Statics

Section: Chapter Questions

Problem 1.12P: A differential equation encountered in the vibration of beams is d4ydx4=2D where x = distance...

See similar textbooks

Related questions

Q: show the step by step by constructing this in Solidworks

Q: Steam generators are a type of heat exchanges that are used in power plants to generate steam at des...

A: Answer: (i) The steam mass flow rate is 11.9522 kg/sec. (ii) The inlet velocity of the steam is 4.24...

Q: Find the mass in metric tons per day of at -5 °C that would theoretically made in a refrigerating pl...

A: Let's first calculate heat absorbed (Qabs) by CO2 in a day: Qabs = m˙(h1 - h2) h1 = specific enthalp...

Q: 2. A medium size power station is used to produce 30 MW net power for a refinery. The station uses s...

A: Disclaimer: Since you have posted a question with multiple subparts, we will solve the first three s...

Q: Q9: A person pushes a cart to the right with a force (Fyc) of 8 N at an angle of e=40° as shown in t...

A: Find the work done on the cart. Given data :- Force = 8 N Horizontal distance = 10 m

Q: For the structure shown in the figure, the working stresses are up to 16000 psi for the steel cable ...

Q: Verify the design of the San Francisquito power plant, which has the following specifications: P=32,...

A: Given: water power→p=32200 hp=32200×3300060=1771×104 ft poundsec head of the plant→H=800ft so discha...

Q: An inventor claims to have perfected an engine that will produce energy by absorbing heat from a fue...

A: Temperature of heat source, TH=300oC=300+273=573 KTemperature of surroundings, TL=15oC=288 KThermal ...

Q: ) A nozzle is a device that is used to increase the velocity of a fluid by varying the cross-section...

A: Question Part 5th,

Q: The higher temperature of a refrigerating system operating at a Reverse Carnot Cycle is 240°F and th...

A: GIVEN DATA- TL=20'F TH=240'F Q1=40TR WE HAVE TO FIND ENTROPY CHANGE

Q: The lightest 6 percent of the bowling balls made are discarded due to the possibility of defects. A ...

Q: 5.15 The flow and head requirements for a particular application are 20 cfs and 100 ft., respectivel...

A: Given : Q = 20 cfs = 9000 gpm H = 100 ft N = 1750 rpm To find : Specific speed if connected in serie...

Q: Which of the following businesses perform workon only one or two automotive systems?a. Dealershipsb....

A: Specialty shops perform work on only one or two automotive systems because specialty shops specializ...

Q: For the mechanism shown in the figure, find the accelerations of the connecting rod at its center of...

A: Given : N = 3500 rpm r1 = 12 cm r2 = 32 cm To find :

Q: Calculate the hourly heating load of a house in which all exterior surfaces have a thermal resistanc...

A: Given Thermal resistance, R = 14 ft2.h.oF/Btu Temperature, T1 = 65oF ...

Q: A horseshoe player releases the horseshoe at A with an initial speed vo = 37 ft/sec. Determine the r...

Q: An aluminum pole for a street light weighs4600 N and supports an arm that weighs 660 N (seefigure). ...

A: Here now assume it as a cantilever beam now find the reactions at A Using the equilibrium equation ...

Q: 65.A cube of wood (s.g. 0.60) has 9-in sides. Compute the magnitude direction of the force required ...

A: Given Specific gravity = 0.9 Side = 9 in = 0.75 ft Fi...

Q: Block A has a mass of 26 kg and block B has a mass of 43 kg. The two blocks are stacked on the ramp ...

Q: 15. A pump operating at 660 hp delivers water, from a large pressurized supply tank to a large press...

A: Given: The pump power, P = 660 hp The water flow rate, Q = 150 ft^3/s The total length, H = 1000 ft ...

Q: Find the force required to move a load of 300 N up a rough plane, the force being applied parallel t...

Q: A two phase liquid - vapor mixture of refridgerant a2 is Contained in a ciosed tank at 10 bar. The q...

Q: 2. A medium size power station is used to produce 30 MW net power for a refinery. The station uses s...

Q: at V = 2 m/s, T = 45°C, and atmospheric pressur over an isothermal plate at T, = 20°C. In the first ...

A: V=2m/sT∞=45°CTs=20°CRex,c=5×105x=0

Q: Determine the ratios of the weights of four beams that have same length.are made of the same materia...

A: The shapes given in the question are Rectangle Square Circle Pipe The height and width of rectangle ...

Q: The truss is supported by a pin connection at A and a roller at E. It is loaded as shown. Use the pi...

Q: 2. Determine the force in each member of the truss shown. B 12' 9 E 9'- -9'- -9'- 300 lb 300 lb 900 ...

A: From equilibrium conditions

Q: Determine the total summation of the y-component surface forces generated by the fluid in unit of kN...

A: Calculate the velocity of flow at 2.

Q: The truss is supported by a pin connection at A and a roller at E. It is loaded as shown. Use the pi...

A: GIVEN DATA- A PLANE TRUSS GIVEN WE HAVE TO FIND FORCE IN GIVEN MEMBER

Q: Determine optimum velocity

A: Given data: For a single stage impulse turbine is: d=6 m N=2700 β=200Therefore for above data, we ha...

Q: The frame ABC consists of two members AB and BC that are rigidly connected at joint B, as shown in p...

Q: 2. A sheet of copper is stretched biaxially in the xy-plane. If the strains in the sheet are 0.40 x ...

Q: A pelton wheel is supplied with water under a head of 100 m at the rate 1000 litres/s. The bucket de...

A: Given that, H=100 m; Q=1000 L/s=10001000=1 m3/s ;ϕ=180-160=20° ;u=20 m/s

Q: In 3-axis milling, the table feedrate is 703.00 mm/min. Using a 10mm endmill to cut the material wit...

Q: alculate the number of vacancies per m3 for gold at 900 C. the energy for vacancy formation is 0.86 ...

A: Given Temperature, T = 900oC = 1173 K Vacancy formation = 0.86 eV/atom Find Number of vacancies

Q: The Rankine cycle with one closed feedwater heater (CFWH). Superheated water vapor enters the turbin...

Q: Problem 1. Beam AB has the given loading per unit length, q(x), Young's modulus, E, and a rectangula...

Q: internal energy of the gas during the process.

A: Given data:Gas contained in a cylinder is compressed, the work required for compression being 500...

Q: Imagine we are viewing the pipe from an Eulerian perspective. The pipe is heated with a Bunsen burne...

Q: lve the bending stress about points A an

A: Concept:Using the bending equation we can calculate the bending stress,MI=σy=ER

Q: 1. Using the method of joints, determine the force in each member of the truss (AB, AC, BC, and CD)....

Q: 4. State 10 mechanical properties and their definition.

A: When we apply external force to the material, mechanical properties define how material will behave ...

Q: new temperature scale called the N-scale is to be defined using the ice point, at 0°C as 50°N and th...

Q: Determine the maximum w that can be applied if the shear stress limit is 100 MPa. Then determine the...

Q: A mechanism has 5 links, its mobility is equal to?

Q: R = 625,000 Pa d,m d. .05 m d. de Find Pi, V. , Vs

A: Given:P2=625000 Pad1=0.1 md2=0.05 m

Q: Draw a sound conclusion based on how you familiarized the key components of the lathe machine. Empha...

A: Lathe stands for Longitudinal Access Turning Horizontal Equipment. In lathe the major operations tha...

Q: The higher temperature of a refrigerating system operating at a Reverse Carnot Cycle is 240 °F and t...

Q: Explain how a hydraulic system uses the incompressibility of a liquid to transfer force and motion.

A: Generally fluids consist of gases and liquid. Gases are compressible fluids while liquids are incomp...

Q: 6- Air at a pressure of 200 kPa and free-stream temperature of 27 C flows over a square flat plate a...

Question

i need the answer quickly

Q9) A raft is constructed of wood having a density of 600 kg/m3. Its surface area is 5.7 m2, and its volume is 0.6 m²
When the raft is placed in fresh water as in Figure 5, to what depth h is the bottom of the raft submerged?
A
Fig. 5: A raft partially submerged in water.

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 2 steps

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

A Ping Log has the following dimensions: L 4 meters; Dia 2 metes; and with relative density of 0.4247 to sink in distilled water. Determine up to what depth the log will sink.
11th - A rectangular plate with a width of 2 m and a height of 3 m was submerged in water. The distance of the upper edge of the plate from the free surface of the water is 5 m. Since the atmospheric pressure is 95 kPa, what is the hydrostatic pressure force on the plate surface considering the atmospheric pressure? a) 688 kN B) 747 kN NS) 864 kN D) 307 kN TO) 2950 kN
The ice at a certain hockey rink is made by freezing water that is 1.5 inch deep. How many gallons of water does it take? Approximate the rink as a 100 ft. by 85 ft. rectangle. hint: 1 gal = 231 cubic inches and 1 ft = 12 inches
If a pool is irregularly shaped and a person being assessed has a weight mg= 800 N but weighs Fn= 40N while submerged. Assuming a residual volume Vres= 1.4 L= 0.0014 m^3. a. What is their average density b. What percentage of their body volume would be above water, while floating? c. What is their bodys volume d. How much more buoyant force would they experience with their lungs holding a full six liters? What percentage of thheir body volume would be above water now?
A ship having a horizontal sectional area of 7,065 m^2 at the waterline has draft of 12.35 m in salt water (s=1.03) while in fresh water draws 12.60 m. Find the weight of the ship with its cargo in MN indicate free body diagram
An atmospheric pressure of 101.325 kPa will be supported by how much height of the water? a. 10.32 m b. 15.42 m c. 13.23 m d. 15.45 m
A piece of lead (sp. Gr. 11.3) is tied to a 130 cc of cork whose specific gravity is 0.25. They float just submerged in water. what is the total volume of lead?
Please show the complete solution. (Example: Conversion of Units) An empty, open can is 30 cm high with a 15 cm diameter. The can, with the open end down, is pushed under water with a density of 1000 kg/m3 level Find the water in the can when the top of the can is 50 cm below the surface.
A vessel is in the form of an inverted regular square pyramid of altitude 9.87 in. and base edge 6.27 in. The depth of the water it contains is 6 in. a. How much will the surface rise when 1 pt. of water is added? ( 1 gal.=231 cu.in.) b. Find the wetted surface when the depth of water is 9.23 in.?
1. A water vessel was designed to go 149 miles underwater, with the surrounding fluid having a density of 1,030,000 g/m^3. What is the pressure difference between the outside and inside of the wall?
A computer is protected against impact by foam packaging (spring stiffness, k = 100 N/cm; mass, m = 11 kg, including packaging). The maximum acceleration that the computer can withstand on impact with a hard surface is 4g. At the maximum acceptable impact acceleration, how much does the packaging compress upon impact? Give the answer in cm. What is the maximum height, h, in cm that the case can fall from without damaging the computer?
An oil of specific gravity of 0.8 is contained in a vessel. At a point the height of oil is 20 m . Find the corresponding height of mercury in meters at that point. CHOICES: a.1.47 b.16 c.272 d.1.17