A rectangular swimming pool 40 ft long, 20 ft wide, and 14 ft deep is filled with water to a depth of 11 ft. Use an integral to find the work required to pump all the water out over the top. (Take as the density of water 8 = 62.4lb/ft.) Work = Don't forget to enter units

A rectangular swimming pool 40 ft long, 20 ft wide, and 14 ft deep is filled with water to a depth of 11 ft. Use an integral to find the work required to pump all the water out over the top. (Take as the density of water 8 = 62.4lb/ft.) Work = Don't forget to enter units

Physics for Scientists and Engineers with Modern Physics

10th Edition

ISBN:9781337553292

Author:Raymond A. Serway, John W. Jewett

Publisher:Raymond A. Serway, John W. Jewett

Chapter14: Fluid Mechanics

Section: Chapter Questions

Problem 21P: Water falls over a dam of height h with a mass flow rate of Iv, in units of kilograms per second....

See similar textbooks

Related questions

Q: A tank has the shape of an inverted circular cone with a height of 10 ft and a base radius of 4…

A: Draw the systematic diagram of the inverted cone. Draw an imaginary ring with thickness delta h, and…

Q: A trough is 4 m long, 5 m wide, and 2 m deep. The vertical cross-section of the trough parallel to…

Q: This question has several parts that must be completed sequentially. If you skip a part of the…

A: The density of water is 1000kg/m3

Q: A pump pumps water from a cistern into an empty water tank 10.0 m high. In 5.00 minutes the pump…

A: Given that :h=10mt=5m =300 sV=1200 l =1.2 m3g=9.8m/s2ρ=1000 kg/m3here,h is the height of the water…

Q: A tank of mass 20 kg containing 100 kg of water (density 1000 kg/m3) is raised vertically at a…

A: Work is said to be done by a force when there is a displacement in the direction of the applied…

Q: In the given question as follow, find the work done in pumping gasoline that weighs 42 pounds per…

A: Given-Wper volume =42 pounds/feet3L= 4 feetD=3 feet habove=5 feet

Q: *** A right circular cylindrical tank of depth 12 ft. and radius 4 ft. is half full of oil weighing…

A: The given tank is in the shape of a right circular cylinder with radius, r=4 ft, and depth, h= 12…

Q: A circular swimming pool has a diameter of 10 m, the sides are 3 m high, and the depth of the water…

Q: 2. Determine the work done against gravity by a pump that discharges 600 liters of fuel oil into a…

A: Given:- V= 600 l = 0.6 m3 h= 20 m ρ= 0.82 g/cc = 820 kg/m3

Q: A conical tank is 12ft across the top and 8 ft deep. If contains water to a depth of 6ft. Find the…

A: Given: D=12 feet height= 8 feet water depth=6 feet Tank with a circular cross-section at a depth y…

Q: Problem 3 A circular swimming pool has a diameter of 8 meters. The sides are 4 meters high and the…

A: It is given that

Q: Steel ball with radius of 0.11 m lays on a bottom of the lake 4 m deep. What work is needed to lift…

Q: A cylindrical water tank 4 meters high with radius of 2 meters is buried so that the top of the tank…

Q: A tank is is half full of oil that has a density of 900 kg/m³. Find the work W required to pump the…

A: Given, radius of the tank, r = 9 m h =3 maccleration due to gravity, g = 9.8 ms2

Q: How much work is required to increase the surface area of a container of water from 200.0 cm² to…

A: Surface tension (T) is the property of liquid that tries to minimize its free surface area. It is…

Q: An open tank has the shape of a right circular cone (see figure). The tank is 8 feet across the top…

A: Diameter of the cone is d=8 ft Height of the cone is h=6 ft Weight of the water per cubic foot is…

Q: A tank is is half full of oil that has a density of 900 kg/m³. Find the work W required to pump the…

A: Givenρ(density of oil)=900 kg/m3r=3mh=1m

Q: Problem 3 A circular swimming pool has a diameter of 8 meters. The sides are 4 meters high and the…

A: Consider a layer of water at a distance x meters from the top of the pool Weight of the layer of…

Q: T 2m 1 4m 1 10m -3m.

Q: a powerful and extremely reliable pump. Each day it takes in and discharges about 7500 L of blood.…

Q: After studying physics, Emily has decided to take a plunge down a waterslide into an inflatable…

A: Given,h = 2.5 mh'=0.5 mθ = 30°

Q: A spherical tank of diameter 4 m is half-full of water (weight density = 9800 N/m³). Setup the…

Q: A water well has an 8-inch diameter and is 170 feet deep. The water is 20 feet from the top of the…

A: Given data The diameter of the well is d = 8 in. The depth of the well is D = 170 feet. The depth of…

Q: Two identical cylindrical vessels with their bases at the same level each contain a liquid of…

Q: Calculate what useful work is done in pumping 1000gallon of water to height of 60 feet. if this work…

A: Given: Volume of the water = 1000 gallon = 3.785 m3 Height to which the water is raised = 60 ft =…

Q: A tank is full of water. Find the work W required to pump the water out of the spout. Use the fact…

Q: Chapter 6, Section 6.6, Question 014 A cylindrical tank of radius 10ft and height 6 ft is two-thirds…

Q: A spherical tank of diameter 4 m is half-full of water (weight density = 9800 N/m³). Setup the…

Q: An aquarium 9 m long, 1 m wide, and 1 m deep is half-filled with water. Find the work needed to pump…

A: Given: Length of aquarium (l) = 9 m. Width of aquarium (w) = 1 m. Height of aquarium (h) = 1 m.…

Q: A spherical tank of diameter 4 m is half-full of water (weight density = 9800 N/m³). Setup the…

Q: 2. Compute the work done against gravity by a pump that discharges 600 liters of fuel oil into a…

A: Please note : As per answering guidelines I can answer the first question only. Since, this is not a…

Q: JA fuel oil tank is an upright cylinder, buried so that its circular top is 8 feet beneath ground…

Q: An open tank has the shape of a right circular cone. The tank is 8 feet across the top and 6 feet…

A: Consider, a disk of thickness dy at the pumped distance as shown below. Using similar triangle…

Q: Water is pumped steadily out of a fooded basement at a speed of 54m through auniform hose of radius…

Q: Steel ball with radius of 0.11 m lays on a bottom of the lake 4 m deep. What work is needed to lift…

A: Given: The radius of the ball is 0.11 m. The depth of the lake is 4 m. The density of the steel is…

Q: A full water tank in the shape of an inverted right circular cone is 26 m across the top and 13 m…

A: Work done is given as the dot product of force acting on the object and displacement of the object.…

Q: When gasoline is burned in the cylinder of an engine, it creates a high pressure that pushes on the…

A: Pressure (P) = 150 psi Diamter (d) = 4 inch distance moved (D) = 4 cm time taken (t) = 0.2 seconds…

Q: The tank shown contains water to a level 1 meter from the top. The tank is 3-meter wide at the top,…

A: Density = 1000 kg/m3 Acceleration due to gravity = g = 9.8 m/s2

Q: A rain cloud contains 2.66 x 10 kg of water vapour. Calculate the amount of time it would take a 2…

A: Given value--- mass = 2.66 × 107 kg. power = 2 kW clouds Altitude = 2 km. We have to find---…

Q: Supposed that a cylindrical has a height 10m the radius of the base is 7m. And it is half filled…

A: Given data: Height of cylinder is, h=10 m. Radius of base is, r=7 m. Distance from top of tank is,…

Q: A hydraulic lift is lifting a car that weighs 12 kN. The area of the piston supporting the car is A,…

Q: Que A cylindrical gasoline tank 4 feet in diameter and 6 feet long is carried on the bank of a truck…

Q: Example 1.29. Calculate the work done in blowing a soap bubble of diameter 100 mm. Assume e surface…

Q: An aquarium 11m long, 2m wide, and 9m deep is full of water. The density of water is 1000kg/m3 and…

A: Given: The length of the aquarium is L=11 m, The width of the aquarium is b=2 m, The length of the…

Q: Problem 6 A tank in the shape of an inverted right circular cone has height 6 meters and radius 3…

Q: A large aquarium of height 5.00 m is filled with fresh water to a depth of 2.00 m. One wall of the…

Q: A cylindrical water tank 6 meters high with a radius of 2 meters is buried so that the top of the…

Question

A rectangular swimming pool 40 ft long, 20 ft wide, and 14 ft deep is filled with water to a depth of 11 ft. Use an integral to find the work required to pump all
the water out over the top. (Take as the density of water 8 = 62.4lb/ft.)
Work =
Don't forget to enter units

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

Step 2

Step 3

Step 4

Trending now

This is a popular solution!

Step by step

Solved in 4 steps with 4 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, physics and related others by exploring similar questions and additional content below.

Similar questions

Sewage at a certain pumping station is raised vertically by 5.49 m at the rate of 1 890 000 liters each day. The sewage, of density 1 050 kg/m3, enters and leaves the pump at atmospheric pressure and through pipes of equal diameter. (a) Find the output mechanical power of the lift station. (b) Assume an electric motor continuously operating with average power 5.90 kW runs the pump. Find its efficiency.
Water falls over a dam of height h with a mass flow rate of Iv, in units of kilograms per second. (a) Show that the power available from the water is P = Ivgh where g is the free-fall acceleration. (b) Each hydroelectric unit at the Grand Coulee Dam takes in water at a rate of 8.50 105 kg/s from a height of 87.0 m. The power developed by the falling water is converted to electric power with an efficiency of 85.0%. How much electric power does each hydroelectric unit produce?
The inside volume of a house is equivalent to that of a rectangular solid 13.0 m wide by 200 m long by 2.75 m high. The house is heated by a forced air gas heater. The main uptake air duct of heater is 0.300 m in diameter. What is the average speed of the duct if it carries a volume equal to that of the house’s interior every 15 minutes?
A garden hose with a diameter of 2.0 cm is used to fill a bucket, which has a volume of 0.10 cubic meters. It takes 1.2 minutes to fill. An adjustable nozzle is attached to the hose to decrease the diameter of the opening, which increases the speed of the water. The hose is held level to the ground at a height of 1.0 meters and the diameter is decreased until a flower bed 3.0 meters away is reached. (a) What is the volume flow rate of the through the nozzle when the diameter 2.0 cm? (b) What does is the speed of coming out of the hose? (c) What does the speed of the water coming out of the hose need to be to reach the flower bed 3.0 meters away? (d) What is be diameter of nozzle needed to reach be flower bed?
Your client is planning to drain their swimming pool and decided to pump it until it drained. A two horsepower motor can do 1100 ft-lb of work per second. They have 0.2 hp motor to used to pump water from a full tank in the shape of a rectangular swimming pool with a 4ft deep, 4 ft wide, and 12 ft long to a 10 ft above the top of the tank, how long it will take?
A soap bubble is blown to a diameter of 7cm . If 36960 erg of work is done in blowing it furthur , find the new radius if the surface tension of soap solution is 40dyne/cm.
Consider a conical water tank with a base diameter and height of 8 m and 10 m, respectively. How much work will it require to pump its contents to the top if initially, it is half-full?
A trough full of water is 20ft. long and its cross section is in the shape of an isosceles triangle 4ft. wide across the topand 4ft. deep. How much is the work done in pumping all the water out of the trough over the top?
An open tank has the shape of a right circular cone. The tank is 8 feet across the top and 6 feet high.How much work is done in emptying the tank by pumping the water over the top edge? Work done: ??? ft-lb
Application of Integration: A tank in the form of an inverted right-circular cone is 8m across the top and 10m deep. The tank is filled to a height of 8m with oil weighing 950kg/m3. Find the work done in pumping all the oil to the top of the tank. Note: g 9.8 m/s2
A tank, shaped like a cone has height 4 meter and base radius 1 meter. It is placed so that the circular part is upward. It is full of water, and we have to pump it all out by a pipe that is always leveled at the surface of the water. Assume that a cubic meter of water weighs 10000N, i.e. the density of water is 10000N/m3. How much work does it require to pump all water out of the tank? Enter the exact value of your answer.
A cylindrical water tank 4 meters high with radius of 2 meters is buried so that the top of the tank is 1 meter below ground level.How much work is done in pumping a full tank of water up to ground level? (The water weighs 9800 newtons per cubic meter.) Work done: