A rectangular tank 3 m x 4 m is 5 m high with 2 orifices placed at a vertical distances of 0.5 m and 1m from the bottom respectively. Both orifices are 100 mm diameter with C=0.607. Determine the: show complete solution a. How long will it take to lower the water at tank by 2 m in seconds? b. How long will it take for the water surface to be at the same level as the upper orifice in seconds?

A rectangular tank 3 m x 4 m is 5 m high with 2 orifices placed at a vertical distances of 0.5 m and 1m from the bottom respectively. Both orifices are 100 mm diameter with C=0.607. Determine the: show complete solution a. How long will it take to lower the water at tank by 2 m in seconds? b. How long will it take for the water surface to be at the same level as the upper orifice in seconds?

Fundamentals of Geotechnical Engineering (MindTap Course List)

5th Edition

ISBN:9781305635180

Author:Braja M. Das, Nagaratnam Sivakugan

Publisher:Braja M. Das, Nagaratnam Sivakugan

Chapter8: Stresses In A Soil Mass

Section: Chapter Questions

Problem 8.14P

See similar textbooks

Similar questions

If a triangle of height d and base b is vertical and submerged in liquid with its vertex at the liquid surface (see Fig. 2), derive an expression for the depth of its center of pressure. a) ?/2 b) 4?/3 c) ?/4 d) 3?/4 e) ?/3
6. Freshwater and seawater flowing in parallel horizontal pipelines are connected to each other by a double U-tube manometer, as shown in figure. Determine the pressure difference ?????? ?????−???? ?????= ?(kPa) between the two pipelines. Take the density of seawater at that location to be P = 1035 kg/m³. (2 decimal)
A tank containing water moves horizontally (parallel to length) with a constant linear acceleration of 3 m/s2 . The tank is 3 m long and the depth of water when the tank is at rest is 1.5 m. FIND THE FOLLOWING: A. what angle (degrees) does the water make during acceleration? B. what is the minimum height of the vessel for no spilling of water? C. what is the maximum pressure head? (m)
6. Freshwater and seawater flowing in parallel horizontal pipelines are connected to each other by a double U-tube manometer, as shown in figure. Determine the pressure difference Pfresh water- Psea water= ?(kPa) between the two pipelines. Take the density of seawater at that location to be P = 1035 kg/m³. (2 decimal)
Calculate the pressure differential of water across the surface of a spherical droplet of radius 200 nm at 20 °C.
A conical tank 4.5m on top and 4,7m tall has a 60mm diameter orifice at its bottom for its outlet. Assume C = 0.63. The tank is filled with 7000 liters of water. What is the depth of the water in the tank in meters? How long will it take to drain the content of the tank in minutes? show solution and diagram
A conical tank is inclined with an angle of 60°. A hole with radius 2-in was opened at the bottom. If initially the tank is full to a height of 9 ft, how long will the tank drain? Consider a coefficient of contraction, 0.6.
1. Determine the pressure in Pascal at a depth of 6m below the free surface of a lake.2. What depth of oil (sp. gr. 0.75) will produce a pressure of 275 kPa? What depth of water?
If a steel rectangular gate (see Figure 1) of 1.0m wide by 1.66 m high, is located in the wall of a reservoir. It is hinged at the top and acts as a relief valve such that when the water level reaches 1.35m above the top of the gate the gate starts to open allowing water to leave the reservoir. If the gate is inclined at 66º to the horizontal, and the density of steel is 7600 kg/m3, determine the thickness of the gate.
A tank shaped in a frustum of a cone has a lower base radius 1 m, upper base radius 0.50 m and an altitude of 10 m. It is filled with water to a depth of 4 m. The water is then transferred to a spherical tank with radius 5 m. What is the depth of the water in the second tank in meter?
Solve for the ratio of equivalent hydraulic conductivity with the following given: h1 = 2 m h2 = 2.5 m h3 = 1.8 m h4 = 0.9 m k1 = 1.5E-3 cm/sec k2 = 2.2E-4 cm/sec k3 = 1.6E-4 cm/sec k4 = 4.0E-4 cm/sec What is the ratio of equivalent hydraulic conductivity?
The open tank filled with a liquid in full as shown in the figure below has the height of h = 6.00 m. The inclined angle of the inclined wall is = 45.00 °. The width (perpendicular to the screen) of the inclined wall is w = 20.00 m. The specific weight of the liquid is = 9.81 kN/m3. (3) For the inclined wall, determine the vertical depth to the center of pressure._________ (m)