A rod is made of two different layers: chromium and aluminum; as shown in the diagram below. Both layers have the same length (L=0.22 m) and the same area (A = 0.1 cm-). In the considered system, chromium is joined to the left hand which is at Teg=60.4 C, whereas aluminum is in %3D left physical contact with the right end at Tght =6.5 C. The thermal conductivity constants of the materials are given as k, = 93.7 W/ (m-K) and k,= 237 W/(m - K). Assuming steady state is eventually achieved, answer the following questions. a) Evaluate the junction temperature between the two layers. Tunction = J/s b) Calculate the rate of heat flow (power) through conduction in SI units. P= Tert Layer 1 Layer 2 Tright

A rod is made of two different layers: chromium and aluminum; as shown in the diagram below. Both layers have the same length (L=0.22 m) and the same area (A = 0.1 cm-). In the considered system, chromium is joined to the left hand which is at Teg=60.4 C, whereas aluminum is in %3D left physical contact with the right end at Tght =6.5 C. The thermal conductivity constants of the materials are given as k, = 93.7 W/ (m-K) and k,= 237 W/(m - K). Assuming steady state is eventually achieved, answer the following questions. a) Evaluate the junction temperature between the two layers. Tunction = J/s b) Calculate the rate of heat flow (power) through conduction in SI units. P= Tert Layer 1 Layer 2 Tright

College Physics

11th Edition

ISBN:9781305952300

Author:Raymond A. Serway, Chris Vuille

Publisher:Raymond A. Serway, Chris Vuille

Chapter1: Units, Trigonometry. And Vectors

Section: Chapter Questions

Problem 1CQ: Estimate the order of magnitude of the length, in meters, of each of the following; (a) a mouse, (b)...

See similar textbooks

Similar questions

Given the heat capacity of copper (0.385 J/goC) and of water, if you place a 100oC copper block into a cup of 20oC water, what do you expect the equilibrium temperature of the two to be, in oC? Assume that the cup is well insulated so that there is no heat gain from or loss to the environment. The block and the water in the cup have the same mass.
ANSWER THE FF and SHOW COMPLETE SOLN: a.) An aluminum sheet of thickness 8.3 cm and area 13 m^2 is welded on top of a brass sheet of the same thickness and area. The thermal conductivities of aluminum and brass are 205 W/m·K and 109 W/m·K, respectively. The aluminum end is kept at 20 °C while the brass end is kept at 30 °C. At the moment when the interface temperature is 24 °C, what is the heat current through the brass sheet? (answer for this is: 102 kW) b.) A 10.0-cm long steel rod is welded end to end to a 20.0-cm long copper rod of the same cross-sectionalarea. The thermal conductivities of steel and copper are 50.2 W/m·K and 385 W/m·K, respectively. The steel endis kept at 100 °C while the copper end is kept at 0 °C. What is the steady-state temperature at the interfaceconnecting the two rods? (answer for this is 20.7 °C)
Two metal rods, one silver and the other copper, are both attached to a steam chamber as shown in the figure, with a temperature of 300 °F, at one end, and an ice water bath, with a temperature of 75 °F, at the other. The cylindrical rods are 60 cm long and have a diameter of 30 cm. When steady state has been reached, how much heat flows through the two rods in 50 minutes? The thermal conductivity of silver is 350 W/(m∙K), and that of copper is 205 W/(m∙K). No heat is exchanged between the rods and the surroundings, except at their ends.
Fused quartz transmits 90 percent of the incident thermal radiation between 0.2 and 4 µm. Suppose a certain heat source is viewed through a quartz window. What heat flux in watts will be transmitted through the material from blackbody radiation sources at (a) 800◦C, (b) 550◦C, (c) 250◦C, and (d ) 70◦C?
In Joule's experiment, if a 10.0 kg mass falls a distance of 1.0 m, and the paddle is immersed in a 0.5L beaker of mercury, what is the rise in temperature of the mercury, given that its mass density is 13.5 g/cm and its specific heat capacity is 138 J/(kg C)?
2.10 kg of mercury (Hg) at 205 °C is mixed with 0.110 kg of water at 80.0 °C A in a well-insulated bucket of negligible heat capacity. What mass of water in grams that will transform to vapor? CHg = 139 J/Kg °C Cwater = 4186 J/Kg °C Lv, water = 22.6 x 105 J/Kg
So, some cold water (Temp. initial 0 *C, mass= .13 kg) is poored into a cup of hot tea (temp. intial 58*C, mass= .31kg). Assuming they have the same specific heat. What is the equilibrium final temperature? How do I set up the mcdeltT formula to find the final temperature?
Suppose you want to raise the temperature of a mass m of ice from T0 < 0 °C to T > 100 °C. In this problem, represent the heat of fusion as Lf, the heat of vaporization as Lv, and the temperatures at which the phase changes occur as Tf and Tv. How much heat must be transferred for this to happen, including the energy needed for phase changes? Your answer should be in terms of the variables in the introduction and the specific heats of ice (ci), water (cw), and steam (cs). The talent heats are Lf= 334kJ/kg and Lv=2256kJ/kg?
A 0.217 kg sample of tin initially at 96.9◦Cis dropped into 0.112 kg of water initially at10.2◦C.If the specific heat capacity of tin is230 J/kg ·◦C, what is the final equilibriumtemperature of the tin-water mixture? Thespecific heat of water is 4186 J/kg ·◦C.Answer in units of ◦C.
Suppose you want to raise the temperature of a mass m of ice from T0 < 0 °C to T > 100 °C. In this problem, represent the heat of fusion as Lf, the heat of vaporization as Lv, and the temperatures at which the phase changes occur as Tf and Tv. How much heat, in kilocalories, must be transferred for this to happen to 0.195 kg of ice starting at a temperature of -20 C and ending at a temperature 130C? How much time, in seconds, is required to do this, assuming a constant 20.0kJ/s rate of heat transfer?
Calculate the length of a 1-meter rod of a material with thermal expansion coefficient α when the temperature is raised from 300 K to 600 K. Taking your answer as the new initial length, find the length after the rod is cooled backdown to 300 K. Is your answer 1 meter? Should it be? How can you account for the result you got?
Two solid spheres, A and B, made of the same material, are at temperatures of 0 °C and 100 °C , respectively. The spheres are placed in thermal contact inan ideal calorimeter, and they reach an equilibrium temperature of 20 °C . Which is the bigger sphere? What is the ratio of their diameters?