A room is maintained at design conditions of 75oF dry bulb and 50% RH. The air outside is at 95oF dry bulb and 75oF wet bulb. The outside air is conditioned and mixed with some room exhaust air. The mixed, conditioned air enters the room and increases 20oF in ……………The volume of air flowing through the coil is most nearly

A room is maintained at design conditions of 75oF dry bulb and 50% RH. The air outside is at 95oF dry bulb and 75oF wet bulb. The outside air is conditioned and mixed with some room exhaust air. The mixed, conditioned air enters the room and increases 20oF in ……………The volume of air flowing through the coil is most nearly

Refrigeration and Air Conditioning Technology (MindTap Course List)

8th Edition

ISBN:9781305578296

Author:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Publisher:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Chapter45: Domestic Refrigerators And Freezers

Section: Chapter Questions

Problem 8RQ: Frost accumulates on the evaporators of forced-draft refrigerators because A. they are generally...

See similar textbooks

Similar questions

Define a near-azeotropic refrigerant blend, and give twoexamples.
What are the refrigeration and cyogenic plant equipment for Oxygen production in terms of mechanical, electrical, plumbing and safety with a mechanical system?
The output of a compressor plant delivering 600 m3 of free air/hr at 7 bar gauge at 20 oC passes through arefrigeration type dehumidifier where it is cooled to 1 oC. How much water should be collected from thedehumidifier per hour ?Please choice one below:a. 5.124 kg/hrb. 0.909 kg/hrc. 0.408 kg/hrd. 3.275 kg/hre. 1.317 kg/hr
Q2/ In AC system, 540 L/s of the outdoor air at 32C db, 23C wb mixes with 2850 L/s of the return air at 24C db, 50% RH. The mixture cools through the cooling load and leave it at 90% RH. If the room SHF is 70%. Calculate: 1. Conditions of the air leaving the coil. 2. Cooling coil capacity. 3. Sensible load, latent load and total load of the room.
1000 cfm of air at 95°F dry bulb, 74°F wet bulb is mixed with 2000 cfm of air at 65°F dry bulb, 54°F wet bulb. Determine the dry bulb temperature of the mixed stream.A. 74.7 °FB. 85.7 °FC. 98.4 °FD. 107.5 °F
Saturated air at 40°F (4.4°C) is first preheated and then saturated adiabatically. This saturated air is then heated to a final condition of 105°F (40.6°C) and 28% rh. To what tem- perature must the air initially be heated in the preheat coil? [Ans: 101°F (37.8°C)] please solve without psychometric chart
The following data are known for Libr-H₂O absorption system. The cooling capacity is 3.5 kW, generation temp. is 82°C, condenser temp. 40°C, evaporator temp. 6°C. Temp. of absorber is 34°C. Assumed saturation condition for strong solution entering generation, weak solution leaving generation and water vapor Leaving evaporator. Properties of solution or water at each point (p, t, h, x), Mass flow rate each point,(COP) act & (COP) tho, Relative COP and Energy balance for all cycle components.
Determine the mass flow rate fuel supplied to a boiler when the temperature of the entering water is 20 C and the exiting temperature is 89 C. The flow of.the pressured water is 2 Kg/s. There is a negligible pressure drop through this boiler and it operates at a constant pressure of 3 bars. The specific heat is c = 4,370 J/(Kg K). There is a 150000W rate of heat loss from the boiler during this process to a surrounding at 293.2 k. Consider steady state conditions. The high heating value (HHV) of the fuel is 50.02 MJ/kg. The cost of the fuel based boiler system is $5000 and has a lifetime of 20 years. The fuel cost is $0.10/kg. There is a tax charge of $0.50/kg of CO2 emission that is passed on to the user. The unit is used for 10 hours per day, 280 days per year. Calculate carbon dioxide emission and theroeconomic cost? There is no cost associated with the water input. Note the total amount of fuel consumed is directly related to the carbon dioxide emission from each process.
.- Air is cooled and humidified, initially at 90 °F BS and 70 °F BH is cooled and dehumidified, reaching 56 °F BS and 54 °F BH, 3000 CFM is supplied. Calculate: a) sensible heat b) latent heat c) total heat d) Lbs. moisture removed per hour e) determine the RH at the inlet and outlet
39 - A fixed volume insulated tank, which was initially empty, was connected by a valve to a distribution line carrying helium gas at a temperature of 125ºC. The valve is opened first and closed when the pressure is the same as the distribution line pressure. What is the final internal energy of helium in the tank? (Internal energy of the warehouse in the final state = Enthalpy of the distribution line). (Cp=5.1926) will be taken. a) 2066.7 kJ/kg B) 2014.7 kJ/kg NS) 701.0 kJ/kg D) 649.1 kJ/kg TO) 2118.6 kJ/kg
A supply line carries a two-phase liquid-vapor mixture of steam at 300 lbf/in2. A small fraction of the flow in the line is diverted through a throttling calorimeter and exhausted to the atmosphere at 14.7 lbf/in2. The temperature of the exhaust steam is measured at 250 deg F. Determine the quality of the steam in the supply line.
Rate of entropy generation