A series RLC circuit with L=160mH, C=100µF and R=40.00 is connected to a sinusoidal voltage e=40.0sinwt volts with w=200 rad/sec. a) What is the impedance of the circuit? b) Let the current at any instant in the circuit be i = losin(@t – 0). Find lo. c) What is the phase angle? d) Calculate the total power and reactive volt-amperes taken by the circuit.

A series RLC circuit with L=160mH, C=100µF and R=40.00 is connected to a sinusoidal voltage e=40.0sinwt volts with w=200 rad/sec. a) What is the impedance of the circuit? b) Let the current at any instant in the circuit be i = losin(@t – 0). Find lo. c) What is the phase angle? d) Calculate the total power and reactive volt-amperes taken by the circuit.

Physics for Scientists and Engineers

10th Edition

ISBN:9781337553278

Author:Raymond A. Serway, John W. Jewett

Publisher:Raymond A. Serway, John W. Jewett

Chapter32: Alternating-current Circuits

Section: Chapter Questions

Problem 20P: A 60.0-ft resistor is connected in series with a 30.0-F capacitor and a source whose maximum voltage...

See similar textbooks

Similar questions

(a) Does the phase angle in an RLC series circuit depend on frequency? (b) What is the phase angle for the circuit when the inductive reactance equals the capacitive reactance?
A series RLC circuit has resonance angular frequency 2.00 103 rad/s. When it is operating at some input frequency, XL = 12.0 and XC = 8.00 . (a) Is this input frequency higher than, lower than, or the same as the resonance frequency? Explain how you can tell. (b) Explain whether it is possible to determine the values of both L and C. (c) If it is possible, find L and C. If it is not possible, give a compact expression for the condition that L and C must satisfy.
An RLC series circuit has a 200 (resistor and a 25.0 mH inductor. At 8000 Hz, the phase angle is 45.0°. (a) What is the impedance? (b) Find the circuit’s capacitance. (c) If Vrms = 408 V is applied, what is the average power supplied?
A series RLC circuit has resistance R = 50.0 and inductance L. = 0.500 H. (a) Find the circuits capacitance C if the voltage source operates at a frequency of f = 60.0 Hz and the impedance is Z = R = 50.0 . (b) What is the phase angle between the current and the voltage?
An RLC series circuit has a 1.00 k(resistor, a 1.50 (H inductor, and a 25.0 nF capacitor. (a) Find the power factor at f = 7.50 Hz. (b) What is the phase angle at this frequency? (c) What is the average power at this frequency? (d) Find the average power at the circuit’s resonant frequency.
An PLC series circuit with R=600 , L = 30 mH. and c=0.050F is driven by an ac source whose frequency and voltage amplitude are 500 Hz and 50 V, respectively, (a) What is the impedance of the circuit? (b) What is the amplitude of the current in the circuit? (c) What is the phase angle between the emf of the source and the current?
A 60.0-ft resistor is connected in series with a 30.0-F capacitor and a source whose maximum voltage is 120 V, operating at 60.0 Hz. Find (a) the capacitive reactance of the circuit, (b) the impedance of the circuit, and (c) the maximum current in the circuit. (d) Does the voltage lead or lag the current? (e) How will adding an inductor in series with the existing resistor and capacitor affect the current? Explain.
An RLC series circuit hag a 1.00 k(register, a 150 (H inductor, and a 25.0 nF capacitor. (a) Find the circuit’s impedance at 500 Hz. (b) Find the circuit’s impedance at 7.50 kHz. (c) It the voltage source has Vrms = 408 V, what is Irms at each frequency? (d) What is the resonant frequency of the circuit? (e) What is Irms at resonance?
At 1000 Hz, the reactance of a 5.0-mH inductor is equal to the reactance of a particular capacitor. What is the capacitance of the capacitor?
Consider a series RLC circuit with R = 25 , L = 6.0 mH, and C = 25 F. The circuit is connected to a 10.-V (rms), 600.-Hz AC source. (a) Is the sum of the voltage drops across R, L, and C equal to 10. V (rms)? (b) Which is greatest, the power delivered to the resistor, to the capacitor, or to the inductor? (c) Find the average power delivered to the circuit.
Consider the Filter circuit shown in Figure P33.56. (a) Show that the ratio of the amplitude of the output voltage to that of the input voltage is to that of input voltage is VoutVin=1/CR2+(1C)2 (b) What value does this ratio approach as the frequency decreases toward zero? (c) What value does this ratio approach as the frequency increases without limit? (d) At what frequency is the ratio equal to one-half?
A 60.0- resistor is connected in series with a 30.0-F capacitor and a generator having a maximum voltage of 1.20 102 V and operating at 60.0 Hz. Find the (a) capacitive reactance of the circuit, (b) impedance of the circuit, and (c) maximum current in the circuit. (d) Does the voltage lead or lag the current? (e) How will putting an inductor in series with the existing capacitor and resistor affect the current? Explain.