A shaft given in the figure has four masses of 200 kg, 300 kg, 400 kg and 200 kg, respectively. and 80mm, 70mm, 60mm and 80mm away from m1 at 300mm, 400mm and 700mm They rotate in radii. Angles between cranks m1 to m2 45 degrees, m2 to m3 70 degrees and m3 and m4 are 120 degrees. Balancing masses will be placed in the L and R planes. m1 and The distance between L planes is 150 mm, and the distance between L and R is 400 mm. Stabilizer If the masses are rotating within a radius of 100 mm, find the sizes and angular positions of these masses. Determine by graphical method.

A shaft given in the figure has four masses of 200 kg, 300 kg, 400 kg and 200 kg, respectively. and 80mm, 70mm, 60mm and 80mm away from m1 at 300mm, 400mm and 700mm They rotate in radii. Angles between cranks m1 to m2 45 degrees, m2 to m3 70 degrees and m3 and m4 are 120 degrees. Balancing masses will be placed in the L and R planes. m1 and The distance between L planes is 150 mm, and the distance between L and R is 400 mm. Stabilizer If the masses are rotating within a radius of 100 mm, find the sizes and angular positions of these masses. Determine by graphical method.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

The following diagram corresponds to questions 1 to 3. A beam rests on two sharp edges as shown on the image. The beam has a length of 7,50 m and a mass of 4,25 kg. Object 1 has a mass of 1,50 kg; object 2 has a mass of 2,35 kg. Point P is 0,50 m form the center of the beam. d 2 Pl CG 1. How much is the torque done by object 1 around point P? A. 55,2 N*m B. 7,36 N*m С. 62,5 N*m D. Object 1 doesn't exert a torque.
The figure below shows the positions of the Centers of mass of the three disks on a rotating shaft. m. =6 kg, M2=4 kg, m3=5 kg, r-=100 mm, r2=200 ver3 = 300. B to dynamically balance the shaft it is desirable to place balancing masses of 3 kg each in their planes. Balancing find the positions of the center of mass (004) of mass A in the unit of cm and degrees. The D value in the figure is 200 mm. mlg my m1 37 53 200 mm 150mm 200 mm ma Please choose one n
The iillustration depicts a prototype design for the High-G Rover. It is made up of an arm that is attached to a shaft that is pinned to a disk. The aarm has a retractable shaft that extends and contracts to cause the disk to rotate. To make the computation easier, let us assumee that the arm does nott rotate A. If the arm's total length is L = 640mm, the distance from the centre of the disk to the shaft pin is r = 112mm, and the arm rotates clockwise at a constant angular velocity of 250.273 rpm. 1.) Would an increase in angular velocity increase point C's linear velocity relative to point A? If so, why or why not? a.) What is the linear velocity of point C with respect to point A if the angular position of the pin (between AB and BC) is 0.578 radians? b.) What is the distance between points A and C if the angular position of the pin (between AB and BC) is 0.578 radians? c.) What is the linear velocity of point C with respect to point A if the angular velocity is increased by 34.34…
6 kg The system shown in the figure consists of two masses attached to a massless road and rotates about the vertical axis at O. The system initially rotating freely at the angular speed of 140 rad/s, when a constant couple moment of Co= 8 Nm is applied on the direction A shown. 3 kg Co a) Find the time required to stop the assembly. b) Calculate the number of revolutions made until the system 0.2 m- stops. 0.4 m
A wheel with rotational inertia 48 kg.m2 is mounted on a fixed, frictionless axle. The angular speed of the wheel is increased from zero to 59 rad/s in 12-s. What is the average net torque/Moment in N.m on the wheel during this time interval?
The following diagram corresponds to questions 1 to 3. A beam rests on two sharp edges as shown on the image. The beam has a length of 7,50 m and a mass of 4,25 kg. Object 1 has a mass of 1,50 kg; object 2 has a mass of 2,35 kg. Point P is 0,50 m form the center of the beam. CG 1. How much is the torque done by object 1 around point P? A. 55,2 N*m B. 7,36 N*m C. 62,5 N*m D. Object 1 doesn't exert a torque. 2. How much is the torque done by the force of gravity of the beam around point P? A. 20,8 N*m N-m ך177 .B C. 156 N*m D. 313 N*m 3. If you needed to cancel the nomal forces of the two objects, where you should place object 2? The axis of rotation is point P. A. 3,30 m from point B. 9,18 m from point P C. 5,69 m from point P D. 3,62 m from point P
((I need to solve all parts please)) For the non-offset slider crank shown in the figure below the crank O2A is rotating at constant speed of 10 rad/s CCW O2A = 70 cm, AB = 210 cm, AG3 = 100 cm. When the slider B is at its minimum position, we need to find : W2 G3 3 B 4 2 7777 The angular velocity of AB in rad/s is = Choose... + The velocity of slider B in m/s is = Choose... + The angular acceleration of AB in rad/s2 is = Choose... * The acceleration of slider B in m/s? is = Choose... + The velocity of point A in m/s (in cartesian form) is = Choose... + The acceleration of point A in m/s² (in cartesian form) is = Choose... The velocity of point G3 in m/s (in cartesian form) is = Choose... + The acceleration of point G3 in m/s² (in cartesian form) is = Choose... +
A shaft carries four masses A, B, C and D with a a magnitude of 200kg, 300kg, 400 kg and 200 kg respectively and revolving at radii 80mm, 70mm, 60mm and 80mm in planes measured from A at 300mm, 400mm and 700mm. The angles between the cranks measured counter clockwise are A to B 450, B to C 700 and C o D 1200. The balancing masses are to be placed in planes X and Y. Distance between planes A and X is 100mm, between X and Y is 400mm and between Y and D is 200mm. If the balancing masses revolve at radius of 100mm find their magnitude and angular position
A riveting machine is used for riveting sheets of 20 mm thickness. The machine is driven by a geared motor of 5 kW. The mass moment of inertia of the rotating parts of the machine attached to flywheel is found to be 10 kg- m². At the beginning of the operation, the flywheel is making 15 r.p.s. If making one rivet takes 30 KN-m of energy in 5 second, then find the reduction of speed of the flywheel
A shaft caries four rotating masses A, B, C and D which are completely balanced. The masses B, C and Dare 50kg, 80kg and 70kg respectively. The masses C and D make angles of 90° and 195° respectively with mass B in the same sense. The masses A, B, C and D are concentrated at radius 75mm,100mm,50mm and 90mmrespectively.The plane of rotation of masses B and C are 250mm apart. Determine the magnitude of mass A and its angular position the position of planes A and D.
Find the value of the input torque on the crank-shaft mechanism in following Figure. The centers of gravity of link 2, 3 and 4 are at G₂, G3 and G4 respectively. The masses and moments of inertia of the links are: m₂=2 kg, m3 =0.5 kg, m4 = 0.5 kg, IG2 = 0.001 kg m², IG3 = 0.01 kg m² and IG4 = 0.002 kg m². It is known that: O₂A = 3 cm, AB = 7 cm, AG3 = 2 cm, 0₂ = 60°, @₂=-20 rad/s², a₂ = -100 rad/s² and that external force P4 has a magnitude of 98 N. consider 03 =338.2° and the following accelerations for links 3 and 4: a3 = -250.26^i- 849:45^j cm/ s², α3 = A3 174:44 rad/ s², aG4 = -25.45^i cm/s², a4 = 0. A 2 Mo 0 10₂=G₂ G₂ 3 B=G4 P₁
Two balls of mass ma and m, are connected by a massless rod of length L. The two vertical dashed lines in the figure, below, represent two different axes of rotation (axes a and b). These axes are parallel to each other and perpendicular to the rod. If the ratio between the two moments of inertia, as measured relative to each axis, is 4 = 3. Ib a. Find the ratio of the masses (ma/mp). b. Find the distance from ball a to the system's center of mass. Axis a Axis b L- ma Two balls connected by a massless rod of length L rotate around the two axes shown.