A ship of 8500 tons displacement has a double bottom tank 11 m wide divided longitudinally in half equally, having a free surface of fuel oil density 0.85 t/m3 . If the virtual loss in metacentric height due to slack fuel oil tank is 5 cm. find the length of the tank

A ship of 8500 tons displacement has a double bottom tank 11 m wide divided longitudinally in half equally, having a free surface of fuel oil density 0.85 t/m3 . If the virtual loss in metacentric height due to slack fuel oil tank is 5 cm. find the length of the tank

Name: A ship of 8500 tons displacement has a double bottom tank 11 m wide di
Uploaded: 2024-03-20T06:56:55.000Z
Channel: Bartleby
Description: A ship of 8500 tons displacement has a double bottom tank 11 m wide divided longitudinally in half equally, having a free surface of fuel oil density 0.85 t/m3 . If the virtual loss in metacentric height due to slack fuel oil tank is 5 cm. find the l

International Edition---engineering Mechanics: Statics, 4th Edition

4th Edition

ISBN:9781305501607

Author:Andrew Pytel And Jaan Kiusalaas

Publisher:Andrew Pytel And Jaan Kiusalaas

Chapter8: Centroids And Distributed Loads

Section: Chapter Questions

Problem 8.76P: A 6-in. diameter hole is drilled in the conical frustum. Calculate the volume and the surface area...

See similar textbooks

Similar questions

U - tube is used to pressure the difference in water channel. p1= 1000 kg/m3. The orange fluid in the U - tube has a density: p2= 2000 kg/m3. The height a = 10 cm and h = 15 cm. If the pressure at point ① is 111 kPa, what is the pressure at point ② ?
A pipe, 12 inch in diameter at A, discharges 4.0 cfs of heavy fuel oil (sp gr = 0.899) into the air at B, where the diameter is 6 inch. If B is 12 ft above A and the frictional loss between the two points is equivalent to 3.0 lb per sq in, determine the pressure at A in pounds per square inch.
Find the density of a metallic body which flows at the interface mercury of specific gravity 13.6 and water such that 40% of its volume us submerged in Mercury and 60% in water.
The counterweight pivot gate shown in Fig. 2.85 controls the flow from a tank. The gate is rectangular and is 3 m x 2 m. Determine the value of the counterweight W such that the upstream water can be 1.5 m deep. Fig. 2.85 Problem 2.27
A tube with diameter of 0.3cm is inserted into water (Surface tension= 0.061N/m). The water in the tube rises to a height of 0.45cm from the surface. Calculate the contact angle between the water and the tube.
Piston A has a cross-section of 1,200 cm^2 while that of piston B is 950 cm^2 with the latter higher than piston A by 1.75 m. If the intervening passages are filled with oil (s= 0.8), what is the difference in pressure between A and B?
If the pressure in a tank of oil (sp gr 0.85) is 376 kN/m2, what is the equivalent head (a) inmeters of oil; (b) in meters of water; (c) in meters of mercury? maintaining the liquid head h at 5.67 ft (d)to what pressure PA be raised in order to double the discharge?
An open tank 1.16 meter in diameter and 1.5 m height is filled with diesel oil (S.G. = 0.84). Assuming 74% of its capacity is occupied by the diesel; calculate the absolute pressure (in kPa) of the fluid at the bottom of the tank.
The horizontal tube is 1 m long and 10 cm in diameter and is filled with a sample material. During a test, the upstream head h, falls from 200 to 180 cm in 4 hr, while h₂ is held constant at 15 cm. The diameter of vertical tube in which h, is measured is 40 cm. What is the indicated average hydraulic conductivity?
Compute the capillary rise of water between two concentric glass tubes of radius r 1 = 2mm, r 2 = 4 mm with a contactangle ϴ = 20ᵒ. Surface tension = 0.07321 N/ m.
A sluice gate is a device that is fitted in a sluice or fluid canal to operate and control the fluid flow. Oil flows in a canal and sluice gate has a breadth of 8m wide and 6m deep. Let the oil density = 850kg/ m^3. Determine : hydroelectric force in(KN) acting on the sluice gate when the oil is level with the top of the sluice gate.?
Answer is: V = 14.17 ft/s