A shunt generator supplies a 34kW load at 225V through cables of resistance, R = 126m2. If the field winding resistance, Rf =680 and the armature resistance, Ra =42m2. Determine the following below: The terminal voltage is, The e.m.f. generated in the armature is, A 4 pole generator with wave wound armature has 50 slots each having 28 conductors. The flux per pole is 0.01 Wb. (i) At what speed must the armature rotate to give an induced EMF of 235V is, (ii) What will be the voltage developed, if the winding is lap connected and the armature rotates at the same speed is,

A shunt generator supplies a 34kW load at 225V through cables of resistance, R = 126m2. If the field winding resistance, Rf =680 and the armature resistance, Ra =42m2. Determine the following below: The terminal voltage is, The e.m.f. generated in the armature is, A 4 pole generator with wave wound armature has 50 slots each having 28 conductors. The flux per pole is 0.01 Wb. (i) At what speed must the armature rotate to give an induced EMF of 235V is, (ii) What will be the voltage developed, if the winding is lap connected and the armature rotates at the same speed is,

Introductory Circuit Analysis (13th Edition)

13th Edition

ISBN:9780133923605

Author:Robert L. Boylestad

Publisher:Robert L. Boylestad

Chapter1: Introduction

Section: Chapter Questions

Problem 1P: Visit your local library (at school or home) and describe the extent to which it provides literature...

See similar textbooks

Similar questions

A 4pole lap wound armature when driven at 600rpm generates 120V. if the flux per pole I 25mWb, find the number of armature conductors.
111/ The armature reaction of the DC generator reduces the generated EMF. Select one: True False
DETERMINE THE EMF GENERATED BY A 4-POLE SIMPLEX LAP WOUND ARMATURE HAVING 300 CONDUCTORS RUNNING AT 900 RPM. THE FLUX PER POLE IS 50mWb
Q2: A500 kW , 500 V, 10 poles d.c generator has lap wound armature Find the electrical angle shift of brushes when ATd / pole = 208 AT . If the ATC for same generator when connected as wave wound is 2600 AT when the brushes on G.N.A .
A long shunt generator delivers 25kW at 220V. The shunt, series and armature resistances are 50ohms, 0.02ohms, and 0.05ohms respectively, calculate the generated emf.
Suppose that, in designing an electrical generator, we need to produce a voltage of 120 V by moving a straight conductor through a uniform magnetic field of 0.5 T at a speed of 30 m/s. The conductor, its motion, and the field are mutually perpendicular. What is the required length of the conductor? It turns out that in generator design, a conductor of this length is impractical, and we must use N conductors of length 0.1 m. However, by connecting the conductors in series, we can obtain the required 120 V. What is the number N of conductors needed?
Discuss about Generator modeling and derive the formula for the real and reactive power supplied by it ?
. When a self-excited compound DC generator supplies load, the terminal voltage is not the same as the generated emE Why? a) voltage drop across the armature resistance will reduce the voltage available at the load terminals b) where there is a series field, voltage drop across the series field resistance will reduce the voltage available at the load terminals c) both "a" and "b" d) neither "a" nor "b"
How many poles should a 60-Hz generator have, if it is connected to a turbine operating undera design head of 3000 ft with a flow of 82 cubic feet per second? Assume turbine specific speedand efficiency of 3 rpm and 84% respectively.
Discuss about generator modeling and drive the formula for the real and reactive power supply it .
A DC shunt generator supplies a load of 27 kW at 210 V through the cables of resistance, R = 126 mΩ. If the field winding resistance, Rf = 62 Ω and the armature resistance, Ra = 35 mΩ, Determine (a) the terminal voltage, and (b) the E.m.f. generated in the armature. The terminal voltage is = The E.m.f generated in armature is =
A long shunt compound dc generator delivers a load current of 69 A at 396 V and has armature, series field and shunt field resistances of 0.096 Ω, 0.014 Ω, and 259 Ω, respectively. Calculate the armature current in ampere.