Pc=nxdxtxo =2x25x20x150 150000 NThe strength of the riveted joint= Least of P, Ps , Pc =150 000 N%3DThe lap jointhe edges ofThere are th%3D000 050= 02I X 0Z X 001 ='91d=d0000$=D0.625 or 62.5 %%3D0000a-single trHomework:1-A single riveted lap joint is made in 1.5 cm thick plates with 2 cm diameter rivetsDetermine the strength of the joint, if the pitch of rivets is 6 cm?Take 6,=1200 kg/cm ; o,= 900 kg/cm² ; 6=1600 kg/cm2-Two plates 16-mm thick are joined by á double riveted lap joint. The pitch of each rowof rivets is 9 cm. The rivets are 2.5 cm in diameter. The permissible stresses are asaqnop -4c-paraller[ans:2827kg]2.G,=1400 kg/cm ; 6,=1100 kg/cm² ; 6.= 2400 kg/cm2.Find the efficiency of the joint .3-A double riveted double cover butt joint is made in 1.2 cm thich plates with 18 mmdiameter rivets.find the efficiency of the joint for a pitch of 8 cm.2.2.стTake :6,=1150 kg/cm ; 6, = 800 kg/cm² ; oc=1600 kg/cm10 mm thick, the allowable stresses are : 6, = 600 kg/cm² ; o, = 500 kg/cm ;2- Butt jo.4-A double riveted lap joint with chain riveting is to be made for joining two platesO=800 kg/cm, find the rivet diameter , pitch of rivets , and distance between rowsof rivets, then find the efficiency of the joint.5-A single riveted double cover bytt joint is made in 10 mm thick plates with 20 mmdiameter rivets with a pitch of 60 mm , calculate the efficiency of the joint , if0,=100 N/c,; 0,=80 N/cm“ ; 0,=160 N/en%3D%3DofThe buaThere ca- squb-sinc-sinop - pе- do

Stress: When a component or a part is subjected to any external force, a resisting force will be…

A single riveted lap joint is made in 1.5 cm thick plates with 2 cm diameter riven Determine the strength of the joint, if the pitch of rivets is 6 cm Take [ans:2827kg] G=1200 kg/cm; 6,=900 kg/cm; 6.=1600 kg/cm %3D %3D

A single riveted lap joint is made in 1.5 cm thick plates with 2 cm diameter riven Determine the strength of the joint, if the pitch of rivets is 6 cm Take [ans:2827kg] G=1200 kg/cm; 6,=900 kg/cm; 6.=1600 kg/cm %3D %3D

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A flange coupling is to connect two 57 mm shafts. The hubs of the coupling are each 111 mm in diameter and 92mm thick and the flange web are 19 mm thick. Six 16 mm bolts in a 165 mm diameter circle connect the flange.The keyway is 6 mm shorter than the hub’s thickness and key is 14 mm x 14 mm. Coupling is to transmit 45 KW at160 rpm. For all parts, yield point value in shear is one – half the yield value which is 448 MPa. Calculate the forceon the shaft
3) A flange coupling is to connect two 60mm shafts. The hubs of the coupling are 120mm, 100mm thick, & the flange webs are 20 mm thick. Six M16 bolts fasten the flange from a 165 bolt circle. The keyway is 15mm shorter than the hub’s thickness & the key is 15mm x 15mm. The coupling transmits 45kW @ 450rpm. The yield point in shear for all materials is half of its yield point in tension or compression. Yield tensile strength is 0.75 of ultimate strength of the materials. The Sult is 448N/mm2 . Find: (a) the shear stress in key; (b) the bearing stress in key; (c) the shear stress in bolts; (d) bearing stress in flange.
A 30-mm thick AISI 1020 steel plate is sandwiched between two 20-mm thick2024-T3 aluminum plates and compressed with a bolt and nut with no washers. The boltis M12 × 1.75, property class 9.8. Draw a sketch of the joint and,(a) Determine a suitable length for the bolt, rounded up to the nearest 5 mm. (b) Determine the bolt stiffness.(c) Determine the stiffness of the members and joint stiffness.
MACHINE DESIGN TOPIC A short compression member with Do = 2Di is tosupport a dead load of 25 tons. The material isto be 4130 steel, WQT 1100 F. Calculate theoutside and inside diameters in terms of incheson the basis of (a) yield strength, (b) ultimatestrength.*For 4130 steel, WQT 1100 FSu = 127 ksiSy = 114 ksi*Use the following Safety FactorsNu = 4Ny = 2
What is the factor of safety when a 0.50-in, 6 x 19 medium plow steel wire rope carrying an 8800 lb load is bent around a 25-in sheave if the breaking strength of the rope is 8.5 tons?
Design of a bolted assembly using a single M16x2 class 8.8 coarse-thread bolt has resulted in a joint where bolt stiffness is k, = 6 N/mm and the overall member stiffness - 18 N/mm. The fastener is to be reused (nonpermanent). Question 1 Value of joint stiffness constant: 0.25 4.0 0.5 0.1 Question 2 Magnitude of bolt tightening load (preload) Fi [kv]: 85 71 94 63
What is the limitations of the Euler’s Formula in terms of the slenderness ratio L/k for acolumn made of AISI 3140 OQT 1000°F, assuming both ends pin-jointed? TakeSy=133000 psi.a. 46b.49c. 50d.48
QUESTION: Suppose a bolted tension used in a doube-D ring configuration is properly preloaded. The spring constant for the bolts is 7.8 MN/m and the spring constant for the members is 12.7 MN/m. By how much does the tensile force in the bolt increase when a load of 705 N is applied? You may assume that joint separation does not occur. Give your answer in units of N
A round cross-sectional bar d= 39 mm is cut from steel of Sut = 715 MPa. The bar is loaded with a completely reversed stresses. What is the strength of failure (in MPa) If only 10 4 cycles are needed? (Take fully corrected Se = 358 MPa, no need to use modification fcactors) (accepted answer range +/- 5 MPa)
A steel bar with a maximum usage strength of 400MPa.30kN axial tensile loads to be appliedIf so, the minimum diameter of the steel bar is several centimeters.Is it possible? (However, the safety rate is five.)
(D) Seven circular cross-section rivets (Dia.=16 mm) are used to fix a lap joint of steel plates under single shear action. If the rivets are made from Aluminium (E=80 GPa) and the plates under tension of 15 kN. Solve this problem to show weather this joint is safe or not. Suppose all the rivets have equal load share.
2. What is the tensile load of a 1/2 in x 4 in x 12ft steel tie rod experiences an 80°F temperature decrease from the no - stress temperature? E=30x10^6 psi, a=6.5x10^-5/°F