A solid aluminum bar (G = 27 GPa) of diameter d = 60 mm is subjected to torques T = 280 N - m acting in the directions shown in the figure.d = 60 mmT = 280 N. m(a) Determine the maximum shear, tensile, and compressive stresses (in MPa) in the bar. (For shear stress, enter the magnitude. For tensile and compressive stresses, include the signs of the values in your answers.)TmaxMPa"t,max"MPaMPa"s,maxShow these stresses on sketches of properly oriented stress elements. (Submit a file with a maximum size of 1 MB.)Choose File No file chosenThis answer has not been graded yet(b) Determine the corresponding maximum strains (shear, tensile, and compressive) in the bar. (For shear strain, enter the magnitude in radians. For tensile and compressive strains, include the signs of the values in your answers and use the deformation sign convention.)Ymaxradmax =max =Show these strains on sketches of the deformed elements. (Submit a file with a maximum size of 1 MB.)Choose File No file chosenThis answer has not been graded yet.

Answered: Image /qna-images/answer/fe190543-6fe5-4443-92ec-d8323b45e470.jpg

A solid aluminum bar (G = 27 GPa) of diameter d= 60 mm is subjected to torques T= 280 N - m acting in the directions shown in the figure. Id= 60 mm T= 280 N- m (a) Determine the maximum shear, tensile, and compressive stresses (in MPa) in the bar. (For shear stress, enter the magnitude. For tensile and compressive stresses, include the signs of the values in your answers.) max MPa tmax MPa cmax MPa Show these stresses on sketches of properly oriented stress elements. (Submit a file with a maximum size of 1 MB.) Choose File No Sie chosen This answer has not been graded yet (b) Determine the corresponding maximum strains (shear, tensile, and compressive) in the bar. (For shear strain, enter the magnitude in radians. For tensile and compressive strains, include the signs of the values in your answers and use the deformation sign convention.) Ymax rad max = emax Show these strains on sketches of the deformed elements. (Submit a file with a maximum size of 1 MB.)

A solid aluminum bar (G = 27 GPa) of diameter d= 60 mm is subjected to torques T= 280 N - m acting in the directions shown in the figure. Id= 60 mm T= 280 N- m (a) Determine the maximum shear, tensile, and compressive stresses (in MPa) in the bar. (For shear stress, enter the magnitude. For tensile and compressive stresses, include the signs of the values in your answers.) max MPa tmax MPa cmax MPa Show these stresses on sketches of properly oriented stress elements. (Submit a file with a maximum size of 1 MB.) Choose File No Sie chosen This answer has not been graded yet (b) Determine the corresponding maximum strains (shear, tensile, and compressive) in the bar. (For shear strain, enter the magnitude in radians. For tensile and compressive strains, include the signs of the values in your answers and use the deformation sign convention.) Ymax rad max = emax Show these strains on sketches of the deformed elements. (Submit a file with a maximum size of 1 MB.)

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter3: Torsion

Section: Chapter Questions

Problem 3.5.12P: A solid aluminum bar (G = 27 GPa ) of diameter d = 40 mm is subjected to torques T = 300 N - m...

See similar textbooks

Similar questions

A solid aluminum bar (G = 27 GPa ) of diameter d = 40 mm is subjected to torques T = 300 N - m acting in the directions shown in the figure, Determine the maximum shear, tensile, and compressive stresses in the bar and show these stresses on sketches of properly oriented stress elements. Determine the corresponding maximum strains (shear, tensile, and compressive) in the bar and show these strains on sketches of the deformed elements.
A hollow steel shaft used in a construction auger has an outer diameter d2= 6.0 in. and inner diameter d1= 4.5 in. (see figure). The steel has a shear modulus of elasticity G = 11.0 × 106 psi. For an applied torque of 150 kip-in., determine the following quantities: shear stress at the outer surface of the shaft, shear stress at the inner surface, and rate of twist (degrees per unit of length). Also, draw a diagram showing how the shear stresses vary in magnitude along a radial line in the cross section.
A solid circular bar of steel (G = 78 GPa) transmits a torque T = 360 N - m. The allowable stresses in tension, compression, and shear arc 90 MPa, 70 MPa, and 40 MPa, respectively. Also, the allowable tensile strain is 220 x 10-6, Determine the minimum required diameter d of the bar, If the bar diameter d = 40 mm, what is Tmax?
-3 An element of aluminum in the form of a rectangular parallelepiped (see figure) of dimensions a = 5.5 in., h = 4.5 in, and c = 3.5 in. is subjected to iriaxial stresses = 12,500 psi, o. = —5000 psi, and ci. = —1400 psi acting on the x,i, and z faces, respectively. Determine the following quantities: (a) the maxim um shear stress in the material; (b) the changes ..la, .11. and 1c in the dimensions of the element: (C) the change .IJ’ in the volume: (d) the strain energy U stored in the element: (e) the maximum value of cr1 when the change in volume must be limited to 0.021%; and (f) the required value of o when the strain energy must be 900 in.-lb. (Assume E = 10,400 ksi and v = 0.33.)
A solid brass bar of diameter d = 1.25 in. is subjected to torques T1as shown in part a of the figure. The allowable shear stress in the brass is 12 ksi. What is the maximum permissible value of the torques T1? If a hole of diameter 0.625 in. is drilled longitudinally through the bar, as shown in part b of the figure, what is the maximum permissible value of the torques T2? What is the percent decrease in torque and the percent decrease in weight due to the hole?
A tubular bar with outside diameterd2= 4.0 in, is twisted by torques T = 70,0 kip-in. (see figure). Under the action of these torques, the maximum tensile stress in the bar is found to be 6400 psi. Determine the inside diameter rtf of the bar. If the bar has length L = 48.0 in. and is made of aluminum with shear modulus G = 4,0 × 106 psi, what is the angle of twist d (in degrees) between the ends of the bar? (c) Determine the maximum shear strain y (in radians)?
The propeller shaft of a large ship has an outside diameter 18 in. and inside diameter 12 in,, as shown in the figure. The shaft is rated for a maximum shear stress of 4500 psi. If the shaft is turning at 100 rpm, what is the maximum horsepower that can be transmitted without exceeding the allowable stress? If the rotational speed of the shaft is doubled but the power requirements remain unchanged, what happens to the shear stress in the shaft?
A circular aluminum tube subjected to pure torsion by torques T(sec figure) has an outer radius r2equal to 1.5 times the inner radius r1. (a) If the maximum shear strain in the tube is measured as 400 × 10-6 rad, what is the shear strain y1at the inner surface? (b) If the maximum a1lo-abk rate of twist is 0.125 °/m and the maximum shear strain is to be kept at 400 × 10-6 rad by adjusting the torque T, that is the minimum required outer radius ( r2)Min?
A punch for making a slotted hole in ID cards is shown in the figure part a. Assume that the hole produced by the punch can be described as a rectangle (12 mm X 3 mm) with two half circles (r = 1.5 mm) on the left and the right sides. If P = 10 N and the thickness of the ID card is 1 mm, what is the average shear stress in the card?
A cylindrical pressure vessel having a radius r = 14 in. and wall thickness t = 0,5 in, is subjected to internal pressure p = 375 psi, In addition, a torque T = 90 kip-ft acts at each end of the cylinder (see figure), (a) Determine the maximum tensile stress ctniXand the maximum in-plane shear stress Tmjv in the wall of the cylinder. (b) If the allowable in-plane shear stress is 4.5 ksi, what is the maximum allowable torque T\ (c) If 7 = 150 kip-ft and allowable in-plane shear and allowable normal stresses are 4.5 ksi and 11.5 ksi, respectively, what is the minimum required wall thickness
A hollow circular tube having an inside diameter of 10.0 in, and a wall thickness of 1.0 in. (see figure) is subjected to a torque T = 1200 kip-in. Determine the maximum shear stress in the tube using (a) the approximate theory of thin-walled tubes, and (b) the exact torsion theory. Does the approximate theory give conservate or nonconservative results?
The flat bars shown in parts a and b of the figure are subjected to tensile forces P = 3.0 kips. Each bar a has thickness t = 0.25 in. (a) For the bar with a circular hole, determine the maximum stresses for hole diameters d = 1 in. and d = 2 in. if the width b = 6.0 in. (b) For the stepped bar with shoulder fillets, determine the maximum stresses for fillet radii R = 0.25 in. and R = 0.5 in. if the bar widths are b = 4.0 in. and c = 2.5 in.