A standard Proctor test was performed on a soil which has a G = 2.75. The moisture content and total density results are shown in the table below. Wet unit weight (KN/m³) Moisture Content 12% 18.1 14% 19.3 16% 20.7 18% 21.0 20% 18.2 a. Calculate the dry unit weight for each sample and type your answers in the first 5 answer boxes below (3 sigs, in KN/m3). b. Calculate the dry unit weight at zero air void for the 12% and 14% moisture content samples and type those answers in boxes 6 and 7 below(3 sigs, in KN/m3). . c. Plot the moisture content-dry unit weight curve and zero air void line on graph paper. d. From the moisture content-dry density curve, determine the maximum dry unit weight(3 sigs, in KN/m3). and optimum moisture content (3 sigs, in %). for this soil and type those answers in boxes 8 and 9 below.

A standard Proctor test was performed on a soil which has a G = 2.75. The moisture content and total density results are shown in the table below. Wet unit weight (KN/m³) Moisture Content 12% 18.1 14% 19.3 16% 20.7 18% 21.0 20% 18.2 a. Calculate the dry unit weight for each sample and type your answers in the first 5 answer boxes below (3 sigs, in KN/m3). b. Calculate the dry unit weight at zero air void for the 12% and 14% moisture content samples and type those answers in boxes 6 and 7 below(3 sigs, in KN/m3). . c. Plot the moisture content-dry unit weight curve and zero air void line on graph paper. d. From the moisture content-dry density curve, determine the maximum dry unit weight(3 sigs, in KN/m3). and optimum moisture content (3 sigs, in %). for this soil and type those answers in boxes 8 and 9 below.

Fundamentals of Geotechnical Engineering (MindTap Course List)

5th Edition

ISBN:9781305635180

Author:Braja M. Das, Nagaratnam Sivakugan

Publisher:Braja M. Das, Nagaratnam Sivakugan

Chapter5: Soil Compaction

Section: Chapter Questions

Problem 5.7P

See similar textbooks

Similar questions

Subj- civil Q. An undisturbed soil sample that is cylindrical in shape and measures 3 in (76.2 mm) in diameter by 6 in (152.4 mm) in length after oven drying weighs 2.57 lb (1.166 kg bulk) as opposed to 3.04 lb (1.38 kg mass). What are the densities and the weights in (a) wet and dry units? Additionally, find out the moisture content.
a. A constant head permeability test was performed on a 30 cm2 (cross sectional area) soil sample. The length of the samples was 10 cm, and a 15 cm head difference was applied during testing. If 20 cm3 of water was collected over 2 minutes, calculate the coefficient of permeability of the soil. b. In a falling head permeability test, the head fell from 62 to 35 cm in 4 minutes. The cross sectional area of the sample is 50 cm2 and the length was 9 cm. If the area of the stand pipe was 0.6 cm2 compute the coefficient of permeability of the soil.
A proctor compaction test was conducted on a soil sample, and the following observations weremade:Water content, percent 7.7 11.5 14.6 17.5 19.7 21.2Mass of wet soil, g 1739 1919 2081 2033 1986 1948 1. determine the wet density in g/cm32. determine the dry density in g/cm33. determine the dry unit weight in kN/m34. construct the compaction curve 5. determine the optimum moisture content in percent 6. determine the maximum dry density in kN/m37. construct the 80% and 100% saturation lines using w% = 8, 12, 16, 20, and 24 8. calculate the saturation for the maximum dry density (ϒdmax in kN/m3) and the optimummoisture content (wopt %)
0.4 m3 moist soil sample was tested in the lab, and the following data was observed
Determine the volume of water flowing through the sample shown in the figure per hour. There are 3 different soil layers and each is 200mm in length and diameter is 150mm. A constant head of 470mm is maintained across the soil sample. The porosity for Soil I is 0.5 and the value of k is 5*10^-3 cm/s. The porosity for Soil II is 0.55 and the value of k is 4.2*10^-2 cm/s. The porosity for Soil III is 0.35 and the value of k is 3.69*10^-4 cm/s. The hydraulic conductivities are measured in the direction of the flow.
Results from a liquid limit test conducted on a soil are given below. a. Determine the liquid limit of the soil. b. If it is known that the PI = 6.5, what would be the plastic limit of the soil? c. Determine the liquidity index of the soil if win situ = 23.8%
The permeability test must be carried out on a soil sample 15 cm long and 8 cm in diameter using the permeameter illustrated below. What is the difference between a variable head permeameter and a constant head permeameter?What is the disadvantage of using the constant head permeameter for all soil types? Which pemeameter is it in the illustration below? Justify your answer.How to calculate the permeability coefficient when the pressure drop is maintained at 30 cm and it takes 2 min and 35 s to collect a volume of water of 200 ml? Is it possible to identify the soil from this result? If so, what soil is it?
A sample of soil obtained from a borrow pit has a wet weight of 42 lb. The total volume occupied by the sample when in the ground was 0.34 ft3. A small portion of the sample is used to determine the water content. When wet, the sample mass is 150 g; after drying, 125 g. (a) What is the water content of the sample? (b) Determine the wet and the dry unit weights of the soil in the borrow pit.
For a given soil sample, n= 0.43 and G₁ = 2.66. Calculate the dry unit weight and degree of saturation. Show complete solutions.
A 50 mm diameter and 90 mm-long silty clay sample was subjected to a falling head permeameter test using a setup similar to the one shown in Figure 6.4b, where the inner diameter of the standpipe was 3.0 mm. The head dropped from 870 mm to 450 mm in 5 minutes. What is the permeability of the sample?
A liquid limit test performed on a soil sample has the following results, compute for the value of the flow index. No. of blows Moisture content 20 40.8% 28 39.1%
Let us assume that a soil sample taken in the field is taken and it must be identified by the SUCS Method and AASHTO Method. Moisture content = 5.75% Limit liquid = 53.5 Plastic limit = 31.6 Granulometry Sieve % Pass No. 4 100 # 40 68 # 200 54.3 Do you select the best answer? a) Inorganic silt and sand, with low plasticity b) Inorganic clay with low plasticity c) Clay silt, traces of gravel, dark Brown