1. A steam power plant operating in a Rankine cycle has saturated vapor at 4.0 MPa leaving the boiler. Theturbine exhausts to the condenser, operating at 75 kPa, and the mass flow rate of the working fluid is 5.0kg/hr. The turbine efficiency is 0.85. Solve for the work produced by the turbine and the pump (in Watts),the heat transfer in the boiler (in Watts), and the Rankine cycle efficiency.Equations:Efficiency of a turbine:ηW, (actual)W,(isentropic)H2.actual - H₁H2isentropic - H₁Efficiency of a compressor:W,(isentropic)W,(actual)=H2.isentropic - H₁H₂,actual - H₁Rankine cycle efficiency:Wnetn = QHWturbine-Wpump|QboilerCOP of a refrigerator:QL (heat absorbed from cold space)We(work input to the compressor)n =BVan Ness - Page 681Sonntag - Page 776Sonntag - Page 810Thermodynamic tables:WaterR-134a

Answered: Image /qna-images/answer/29c3e325-a6ca-4664-a2bf-3040b8d491c7.jpg

A steam power plant operating in a Rankine cycle has saturated vapor at 4.0 MPa leaving the boiler. The turbine exhausts to the condenser, operating at 75 kPa, and the mass flow rate of the working fluid is 5.0 kg/hr. The turbine efficiency is 0.85. Solve for the work produced by the turbine and the pump (in Watts), the heat transfer in the boiler (in Watts), and the Rankine cycle efficiency. Equations: Efficiency of a turbine: W,(actual) W,(isentropic) H₂ H₂.actual - H₁ 12.isentropic - H₁ Efficiency of a compressor: H2.isentropic - H₁ W,(isentropic) W,(actual) H2.actual - H₁ Rankine cycle efficiency: η = Wnet Он Wturbine-Wpump| Qboiler COP of a refrigerator: QL (heat absorbed from cold space) We(work input to the compressor) Thermodynamic tables: Water R-134a n = η = B = Van Ness - Page 681 Sonntag - Page 776 Sonntag - Page 810

A steam power plant operating in a Rankine cycle has saturated vapor at 4.0 MPa leaving the boiler. The turbine exhausts to the condenser, operating at 75 kPa, and the mass flow rate of the working fluid is 5.0 kg/hr. The turbine efficiency is 0.85. Solve for the work produced by the turbine and the pump (in Watts), the heat transfer in the boiler (in Watts), and the Rankine cycle efficiency. Equations: Efficiency of a turbine: W,(actual) W,(isentropic) H₂ H₂.actual - H₁ 12.isentropic - H₁ Efficiency of a compressor: H2.isentropic - H₁ W,(isentropic) W,(actual) H2.actual - H₁ Rankine cycle efficiency: η = Wnet Он Wturbine-Wpump| Qboiler COP of a refrigerator: QL (heat absorbed from cold space) We(work input to the compressor) Thermodynamic tables: Water R-134a n = η = B = Van Ness - Page 681 Sonntag - Page 776 Sonntag - Page 810

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A simple rankine ideal cycle with water as the working fluid. Twenty kilograms of steam enters the turbine at 7.356 MPa and 500.356 oC and is cooled in the condenser at a pressure of 10.356 KPa by running cooling water from a lake through the tubes of the condenser at rate of 2000 kg. Show the T-s diagram and schematic of simple rankine cycle. For cycle determin (a) the turbine work, (b) the heat added, (c) the temperature rise of the cooling water, (d) the thermal efficiency of the cycle. For engine, determine (e) the heat added, (f) the thermal efficiency of the engine, and (g) Draw the T-s and schematic diagram.
An ideal reheat 210 MW Rankine cycle with water as the working fluid operates the boiler at 15 MPa, the reheater at 2 MPa, and the condenser at 10 kPa. The temperature is 500 0C at the entrance of the high-pressure and low-pressure turbines. Determine (a) the quality of the steam at the low-pressure turbine exit, (b) the thermal efficiency of this system, and (c) the rate of heat transfer in the reheater.
A 40 MW steam plant working on the Rankine cycle operates between boiler pressure of 4 MPa and condenser pressure of 10 KPa. The steam leaves the boiler and enters the steam turbine at 400°C. The isentropic η of the steam turbine is 85%. Determine a) The cycle η b) The quality of steam from the turbine and c) The steam flow rate in kg per hour. Consider pump work.
Thermodynamics 2 Consider a steam power plant that operates on a reheat Rankine cycle and has a net power output of 91 MW. Steam enters the high-pressure turbine at 10 MPa and 500 C and the low-pressure turbine at 1 MPa and 500 C. Steam leaves the condenser as a saturated liquid at a pressure of 10 kPa. The isentropic efficiency of the turbine is 95 percent, and that of the pump is 90 percent. The required power input in the pump in MW.
Water is the working fluid in a Rankine cycle modified to include one closed feedwater heater and one open feedwater heater. Superheated vapor enters the turbine at 16 MPa, 560 deg C, and the condenser pressure is 8 kPa. The mass flow rate of steam entering the first-stage turbine is 120 kg/s. The closed feedwater heater uses extracted steam at 4 MPa, and the open feedwater heater uses extracted steam at 0.3 MPa. Saturated liquid condensate drains from the closed feedwater heater at 4 MPa and is trapped into the open feedwater heater. The feedwater leaves the closed heater at 16 MPa and a temperature equal to the saturation temperature at 4 MPa. Saturated liquid leaves the open heater at 0.3 MPa. Assume all turbine stages and pumps operate isentropically. Determine (a) the net power developed, in kW. (b) the rate of heat transfer to the steam passing through the steam generator, in kW. (c) the thermal efficiency. (d) the mass flow rate of condenser cooling water, in kg/s, if the…
In a Thermal Power Plant with a Rankine cycle, superheated steam at 50 bar and 500°C enters the turbine, its isentropic efficiency is 0.8. The condenser that is operating at 0.05 bar delivers saturated liquid to a feed pump, its isentropic efficiency is 0.7. Determine the thermal efficiency of the Power Plant and the mass flow of steam required to generate 50 MW of net power.
A 60 MW power plant operates with a reheat cycle. The steam enters the turbine at 15 MPa, 590°C. The steam enters the reheater at 1.95 MPa and 280°C and exits at 1.8 MPa, 590°C. Conden pressure is. 0.0035 MPa. The steam rate is 150.000 kg/hr, and the generator efficiency is 90%. Determine the following: 1. Ideal cycle thermal efficiency without pressure drop 2. Actual cycle thermal efficiency 3. Actual combined engine efficiency 4. Enthalpy of exhaust steam (at point 4) if the heat lost through the turbine casing is 2% of the combined work.
A steam power plant operates on the reheat Rankine cycle. as shown in the schematic diagram (Fig. Q 2). Steam enters the high-pressure turbine at 12.5MPa and 550o C at a rate of 7.7 kg/s and leaves at 2 MPa. Steam is then reheated at constant pressure to 450o C before it expands in the low-pressure turbine. The isentropic efficiencies of the turbine and the pump are 85% and 90%, respectively. Steam leaves the condenser as a saturated liquid. If the moisture content of the steam at the exit of the turbine is not to exceed 5%, then make all the necessary assumptions and determine(a) the condenser pressure,(b) the net power output, and(c) the thermal efficiency.Draw an accurate T-s diagram of the cycle and label all the property values on this diagram.
Consider a steam power plant that operates on the ideal reheat Rankine cycle. The plant maintains the boiler at 5000 kPa, the reheat section at 1200 kPa, and the condenser at 20 kPa. The mixture quality at the exit of both turbines is 96 percent. Determine the temperature at the inlet of each turbine and the cycle's thermal efficiency. Answers: 327°C, 481°C, 35.0 percent.
A simple ideal Rankine cycle with water as the working fluid operates between the pressure limits of 3 MPa in the boiler and 30 kPa in the condenser. If the quality at the exit of the turbine cannot be less than 79 percent, what is the maximum thermal efficiency this cycle can have? Use steam tables. The maximum thermal efficiency is
A steam power plant operating on the intermediate steam Rankine cycle produces a net power of 160 MW. Water vapor enters the turbine at a pressure of 15 MPa and a temperature of 600 oC, and the condenser at a pressure of 15 kPa. The isentropic efficiency of the turbine is 85 percent and the isentropic efficiency of the pumps is 90 percent. In order to heat the feed water, some steam is separated from the turbine at a pressure of 0.6 MPa and sent to the open feedwater heater and exits the heater as a saturated liquid. Accordingly, fill in the blanks below. (Pump 1 inlet will be considered as saturated liquid.) a) The mass flow rate of the steam passing through the boiler is m5= ..... kg/s. b) The mass flow rate of the steam separated from the turbine to heat the feed water is m6= ...... kg/s. c) The heat entering the cycle is Qin = ...... kW. d) The heat released from the cycle is Qout = ...... kW. e) The power produced in the turbine is WTurbine= ...... kW. f) The power consumed in…
A steam power plant operates on an ideal regenerative Rankine cycle with two open feedwater heaters. Steam enters the turbine at 10 MPa and 600C and exhaust to the condenser at 5 kPa. Steam is extracted from the turbine at 0.6 and 0.2 MPa. Water leaves both feedwater heaters as a saturated liquid. The mass flow rate of steam through the boiler is 22 kg/sec. Show the cycle on a T-s diagram, and determine (a) Total power requirement of the pump in Hp, (b) Turbine power output in MW, (c) the net power output of the power plant in MW, (d) mass of steam extracted for feedwater heating in kg/sec,