A load P is supported by two springs arranged in series. The upper spring has 20 turns of 20-mm diameter wire on a mean diameter of 150 mm. the lower spring consists of 15 turns of 10-mm diameter wire on a mean diameter of 130 mm. The load produces a total deflection of 80 mm. G = 83 GPa. Use Wahl's Formula. The maximum shearing stress in the upper spring is __MPa (A) 12.8 B) 34.4 C) 18.1 (D) 27.6 E 55.44

A load P is supported by two springs arranged in series. The upper spring has 20 turns of 20-mm diameter wire on a mean diameter of 150 mm. the lower spring consists of 15 turns of 10-mm diameter wire on a mean diameter of 130 mm. The load produces a total deflection of 80 mm. G = 83 GPa. Use Wahl's Formula. The maximum shearing stress in the upper spring is __MPa (A) 12.8 B) 34.4 C) 18.1 (D) 27.6 E 55.44

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A flanged bolt coupling consists of six - ½ inch steel bolts evenly spaced around a bolt circle of 12 inch in diameter, and four – ¾ inch aluminum bolts on a concentric bolt circle 8 inches in diameter. With an applied torque of 200 inches determine the max shearing stress in the aluminum and steel bolt. Use Gst = 12x10 6 psi and Gal = 4x106 psi
Two steel springs arranged as shown support a load P. The left spring consists of 12 turns of 20-mm diameter wire on a mean diameter of 300 mm. The right spring has 10 turns of 16-mm diameter wire on a mean diameter of 200 mm. Calculate the maximum value of P and the total elongation if the allowable shearing stress is 200 MPa. Us the Exact formula. Answer: P = 1443.35 N
Two pipes were connected by a flanged bolt coupling. The material properties are as follows: For outer bolts, 12 pieces, 16 mm diameter, on a mean radius of 150 mm, G = 28 GPa. For the inner bolts, 8 pieces, 12 mm diameter, on a mean radius of 100 mm, G = 20 GPa. Determine the total torque of the system if the shearing stress is limited to 30 MPa in the bolts. (Draw also the FBD) with complete solution
A light helical spring is fabricated by wrapping ¾ -in diameter wire around a forming cylinder 10 inches in diameter. How many number of turns are required to allow an elongation of 3.5 inches. The shearing stress is limited to 18 ksi. Use G = 12 x 106 psi. Answer: n = 5 turns
Two steel springs arranged in series support a load p the upper spring has 12 turns of 25 mm diameter wire on a mean radius of 100 mm the lower spring consist of 10 turns of 20 mm diameter wire on a mean radius of 75 mm use G=83GPA Compute A. the value of the total elongation of the assembly B.the most nearly gives the maximum value of pi if it the allowable shearing stress is 200 mpa c.which of the most nearly gives the equivalent spring constant assembly
Two steel springs with plain ends are arranged in series and supports a load. The upper spring has 12 turns of 27-mm-diameter wire on a mean diameter of 200 mm. The lower spring consists of 8 turns of 20-mm diameter wire on a mean diameter of 150 mm. The maximum shearing stress in either spring must not exceed 217 MPa. Use G = 83 GPa. Calculate the maximum value of force acting on the upper spring alone in N.
Two steel springs arranged in series supports a load P. The upper spring has 12 turns of 20-mm-diameterwire on a mean radius of 100 mm. The lower spring consists of 10 turns of 25-mm diameter wire on amean radius of 75 mm. If the maximum shearing stress in either spring must not exceed 300 MPa,compute the maximum value of P and the total elongation of the assembly. Use approximation formulaand G = 83 GPa. Compute the equivalent spring constant by dividing the load by the total elongation.
A load P is supported by two concentric steel springs.Given:Inner Spring:30 turns of 20-mm ø wireMean ø = 150 mmOuter Spring:20 turns of 30-mm ø wireMean ø = 200 mmFind the maximum load that will not exceed a shearing stress of 140 MPa in eitherspring. G = 83 GPa.
Two concentric, helical compression springs support a 6.5-kip load. The larger spring has an outside diameter of 7 in., a free length of 7 1/8 in., 4 turns, and is made of a 1 3⁄8 in. steel wire. The smaller spring has an outside diameter of 4 1⁄8 in., a free length of 6 13/16 in., 6 turns, and is made of 7⁄8 in. steel wire. Compute the shearing stress in each spring. PLEASE I NEED IT . ASAP
A 1.5-inch Monel shaft is used in a torsional application. Based on the operating speed of 100 rpm and factor of safety of 12. How much horsepower can it transmit? Assume the shearing stress is ¾ of the ultimate tensile stress which is 100 ksi.
A plain flange coupling is used by a 75 mm shaft to transmit 50 kW at 100 rpm. It uses 6 bolts with a diameter of 20 mm. Determine the bolt circle diameter if the shearing stress of the bolt is 25 MPa. A. 102.32 mm B. 202.64 mm C. 152.16 mm D. 252.78 mm
A 22.2 mm diameter bolt having a diameter at the root of the threads of 18.6 mm is used to fasten two timbers as shown. The nut is tightened to cause a tensile load in the bolt of 34 kN. (a) Determine the shearing stress in the head of the bolt. (DRAW THE FREE BODY DIAGRAM) (b) Determine the shearing stress in the threads. (c) Determine the outside diameter of the washers if their inside diameter is 28 mm and the bearing stress is limited to 6 MPa. (DRAW THE FREE BODY DIAGRAM)