A student prepared a calibration curve by measuring of the absorbance of five standard solutions of a compound at 300 nm. A cuvette with a path length of 5 cm was used . if the slope of the curve was 300 L/mol. the molar absorptivity of the compound is…….. 60 L mol-1cm-1 1500 L mol-1cm-1 0.20 L mol-1cm-1 5.0 L mol-1cm

A student prepared a calibration curve by measuring of the absorbance of five standard solutions of a compound at 300 nm. A cuvette with a path length of 5 cm was used . if the slope of the curve was 300 L/mol. the molar absorptivity of the compound is…….. 60 L mol-1cm-1 1500 L mol-1cm-1 0.20 L mol-1cm-1 5.0 L mol-1cm

Principles of Instrumental Analysis

7th Edition

ISBN:9781305577213

Author:Douglas A. Skoog, F. James Holler, Stanley R. Crouch

Publisher:Douglas A. Skoog, F. James Holler, Stanley R. Crouch

Chapter13: An Introduction To Ultraviolet-visible Molecular Absorption Spectrometry

Section: Chapter Questions

Problem 13.24QAP

See similar textbooks

Similar questions

A student prepared several solutions of an unknown molecule, each at a different concentration. The absorbance of each solution was measured at 630 nm with a path length of 0.760 cm. The student then plotted the absorbance of each sample vs. its concentration (in uM), and found a best-fit line of y = 0.00626x + 0.00732. Calculate the molar absorptivity of the unknown molecule (in M-1 cm-1).
Suppose that a solution has an absorbance of 0.226 at a wavelength of 450 nm. If the concentration of the solution is 24 μM, what is the value of the molar absorptivity? The data were taken with a standard 1-cm cuvette.
Suppose that a solution has an absorbance of 0.250 at a wavelength of 450 nm. If the concentration of the solution is 22 μM, what is the value of the molar absorptivity? The data were taken with a standard 1-cm cuvette. molar absorptivity in (L cm^−1 mol^-1):
The standard curve was made by spectrophotographic analysis of equilibrated iron(III) thiocyanate solutions of known concentration. You are asked to analyze a Fe(SCN)2+Fe(SCN)2+ solution with an unknown concentration and an absorbance value of 0.4150.415 . The slope-intercept form of the equation of the line is ?=4558.4?+0.0147y=4558.4⁢x+0.0147 . The unknown was analyzed on the same instrument as the standard curve solutions at the same temperature. What is the Fe3+Fe3+ concentration of the unknown solution?
Calculate the molar absorptivity of a solute when its measured absorbance is 1.050 with a concentration of 1.45 x 10-3 M. Assume the path length of the cell is 1.0 cm.
What is the molar absorptivity of a 2.50 x 10-4 M solution if its absorbance at 550 nm is 0.500? The sample is placed in the standard 1-cm quartz cuvette. 2.00 x 10-3 M-1cm-1 5.00 x 10-4 M-1cm-1 2.00 x 103 M-1cm-1 1.25 x 10-4 M-1cm-1
Calculate the molar absorptivity and absorbance of a 1.00 x 104 M solution, which has atransmittance of 32.1% , when the path length is 2.5 cm at 650 nm. (
Chemistry Atomic absorption analysis of Zn gave a calibration best fit line of A=0.670(ppm Zn) The detection limit was determined for this analysis using a 0.020 ppm Zn solution. The standard deviation of the absorbances for 11 samples of the solution was found to be 1.560 x 10-3 and the slope of the calibration curve was 0.026. Calculate the detection limit, Cq, (in units of ppm) for this instrument. Give your answer to 3 places after the decimal place.
A green solution containing Ni+2 ions absorbs 580 nm light. Undiluted, a sample of this solution sampled in a 1.00 cm diameter cuvette has an absorbance of 0.9765 a.u.. If the molar absorptivity coefficient for Ni+2 is 6.3 x 104 M -1 cm -1 at 580 nm, how much of the original stock Ni+2 solution (in mL) needs to be added to water to create a total dilute solution volume of 10.00 mL that measures an absorbance of 0.146 a.u. at 580 nm? Report your answer to 3 significant figures. Do not include the "mL' unit label in your response
Five standard chromium (VI) solutions were prepared through serial dilution technique with corresponding absorbance readings at 540 nm wavelength (as follows: Absorbance Concentration A1 = 0.650 C1 = 1.9 ppm A2 = 0.712 C2 = 4.0 ppm A3 = 1.370 C3 = 6.0 ppm A4 = 2.050 C4 = 8.0 ppm A5 = 3.423 C5 = 10.0 ppm The sample solution gives an average absorbance reading of 0.713. What is then the concentration of chromium (VI) ion in the sample?
Five standard chromium (VI) solutions were prepared through serial dilution technique with corresponding absorbance readings at 540 nm wavelength as follows: Absorbance Concentration A1 = 0.650 C1 = 1.9 ppm A2 = 0.712 C2 = 4.0 ppm A3 = 1.370 C3 = 6.0 ppm A4 = 2.050 C4 = 8.0 ppm A5 = 3.423 C5 = 10.0 ppm The sample solution gives an average absorbance reading of 0.713. What is then the concentration of chromium (VI) ion in the sample? (Note: please provide necessary solutions)
Find the concentration of benzene in hexane if the absorbance is 0.188 in a 1.000-cm cell.