A synchronous generator runs at 250 rpm and generates at 50-Hz. There are 216 slots, each containing 5 conductors arranged in a full-pitched winding for 3-phase star connection. All the conductors of each phase are in series and the flux per pole at no-load sinusoidally distributed over the pole pitch is 30 mWb. Find the emf induced in each phase winding and the terminal voltage

A synchronous generator runs at 250 rpm and generates at 50-Hz. There are 216 slots, each containing 5 conductors arranged in a full-pitched winding for 3-phase star connection. All the conductors of each phase are in series and the flux per pole at no-load sinusoidally distributed over the pole pitch is 30 mWb. Find the emf induced in each phase winding and the terminal voltage

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter11: Transient Stability

Section: Chapter Questions

Problem 11.3P

See similar textbooks

Similar questions

Two alternators rated 400 MW and 600 MW are operating in parallel. The droopcharacteristics of their governors are 3% and 4% respectively from no loadto full load. Assuming that the alternators are operating at 50 Hz at noload, how would a load of 1000 MW be shared between them? What will be thesystem frequency at this load?
Problem 1. to. In the problem shown, calculate the Load node regulation. Assume the generator maintains its generation voltage in terminals
Draw voltage phasor diagrams for different load cases of salient synchronous generators and derive the expression of the induced voltage.
Which of the following is true in the phasor diagrams drawn according to the ohmic, inductive and capacitive operating states of the round pole synchronous generator a) Due to the voltage Efd, the excitation current is large in capacitive operation and small in ohmic operation b) Due to the voltage Efd, the excitation current is large in ohmic operation and small in inductive operation c) Due to the voltage Efd, the excitation current is small in capacitive operation and large in inductive operation. d) Due to the voltage Efd, the excitation current is large in capacitive operation and small in inductive operation.
Q2: A500 kW , 500 V, 10 poles d.c generator has lap wound armature Find the electrical angle shift of brushes when ATd / pole = 208 AT . If the ATC for same generator when connected as wave wound is 2600 AT when the brushes on G.N.A .
(vi) Explain the concept of load transfer between the DC generators operating in parallel using load –voltage characteristics.
A type of cumulatively-compounded dc generator where the full-load terminal voltage is the same as its no-load voltage is called the _____ - compounded dc generator. a. over b. flat c. under d. shunt
PUT THE EQUATION Given a progressive 2-layer simplex lap winding for a 4-pole dc generator having 20 slots and 20 commutator segments, determine the following and input it on the text field provided. determine: a.Coil Pitch, Ys b.Commutator Pitch, Yc, Back Pitch, YB d. Front Pitch, YB, No. of Parallel Paths
Q2: A500 kW, 500 V, 10 poles d.c generator has lap wound armature Find the electrical angle shift of brushes when AT4 / pole = 208 AT. If the ATC for same generator when connected as wave wound is 2600 AT when the brushes on G.N.A.
A 4 pole dc shunt generator with a shunt field resistance of 100 ohm and an armature resistance of 1 ohm has 378 wave connected conductor in its armature. the flux per pole is 0.02wb, if the load resistance of 10 ohm is connexted across the aemature terminal and the generator driven at 1000rpm, calculate the power obsorbed by load
A 80 MVA synchronous generator has Xs = j8Ω. The generator is supplying itsrated power to an infinite bus at a voltage of 33KV and a power factor of 0.9lagging.Determine the following:a) The generator emf (E) and the power angle.b) The maximum power (Pmax) that the generator can supply and the armaturecurrent (Ia) in this case (i.e. when the power is maximum) and what is thepower factor?
The magnitude of the no-load, line-neutral voltage induced on the ‘a’-phase stator windings of a synchronous 3 phase generator is |Ea | = 480 V. Presume the stator winding resistance is negligible, and that the synchronous reactance is Xs = 1.1 Ω. The full-load, per-phase current magnitude for the generator is 30 A at a power factor of 0.8 leading . For these conditions: a. What is the line-neutral ‘a’-phase terminal voltage, Vథ? b. What is the power angle (?)? c. What is the percent voltage regulation? d. What is the total 3 PHASE complex, real, and reactive power delivered to the load?