A tangent cam with straight working faces tangential to a base circie of 120 mm diameter has a roller follower of 48 mm diameter. The line of stroke of the roller follower passes through the axis of the cam. The nose circle radius of the cam is 12 mm and the angle between the tangential faces of the cam 90°. If the speed of the cam is 180 rpm, determine the acceleration of the follower, when i) during the lift, the roller just leaves the straight flank.

A tangent cam with straight working faces tangential to a base circie of 120 mm diameter has a roller follower of 48 mm diameter. The line of stroke of the roller follower passes through the axis of the cam. The nose circle radius of the cam is 12 mm and the angle between the tangential faces of the cam 90°. If the speed of the cam is 180 rpm, determine the acceleration of the follower, when i) during the lift, the roller just leaves the straight flank.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A cam, with a minimum radius of 25 mm, rotating clockwise at a uniform speed is to be designed to give a roller follower, at the end of a valve rod, motion described below : To raise the valve through 50 mm during 120° rotation of the cam To keep the valve fully raised through next 30° To lower the valve during next 120°; and To keep the valve closed during rest of the revolution i.e. 90° ; The diameter of the roller is 20 mm and the diameter of the cam shaft is 25 mm. The displacement of the valve, while being raised and lowered, is to take place with simple harmonic motion. b) Determine the maximum acceleration of the valve rod when the cam shaft rotates at 100 r.p.m.
A cam, with a minimum radius of 25 mm, rotating clockwise at a uniform speed is to be designed to give a roller follower, at the end of a valve rod, motion described below : To raise the valve through 50 mm during 120° rotation of the cam To keep the valve fully raised through next 30° To lower the valve during next 120°; and To keep the valve closed during rest of the revolution i.e. 90° ; The diameter of the roller is 20 mm and the diameter of the cam shaft is 25 mm. The displacement of the valve, while being raised and lowered, is to take place with simple harmonic motion. c) Draw the displacement, the velocity and the acceleration diagrams for one complete revolution of the cam.
A cam, with a minimum radius of 25 mm, rotating clockwise at a uniform speed is to be designed to give a roller follower, at the end of a valve rod, motion described below : 1. To raise the valve through 50 mm during 120° rotation of the cam ; 2. To keep the valve fully raised through next 30°; 3. To lower the valve during next 120°; and 4. To keep the valve closed during rest of the revolution i.e. 90° ; The diameter of the roller is 20 mm and the diameter of the cam shaft is 25 mm. Draw the profile of the cam when (a) the line of stroke of the valve rod passes through the axis of the cam shaft, and (b) the line of the stroke is offset 15 mm from the axis of the cam shaft. The displacement of the valve, while being raised and lowered, is to take place with simple harmonic motion. Determine the maximum acceleration of the valve rod when the cam shaft rotates at 100 r.p.m. Draw the displacement, the velocity and the acceleration diagrams for one complete revolution of the cam.
A disc cam rotating in a clockwise direction is used to move a reciprocating roller with simple harmonic motion in a radial path, as given below: (1) Outstroke with maximum displacement of 25 mm during 120° of cam rotation, (ii) Dwell for 60° of cam rotation, (iii) Return stroke with maximum displacement of 25 mm during 90° of cam rotation, and (iv) Dwell during remaining 90° of cam rotation. The line of reciprocation of follower passes through the camshaft axis. The maximum radius of cam is 20 mm. If the roller diameter is 8 mm. Draw the profile of the cam when the line of reciprocation of the follower is offset by 20 mm towards right from the cam shaft axis.
A camshaft of four cams located at plane A, B, C, and D rotates at the mass eccentricity of 100 mm, 150 mm, 150 mm, and 200 mm, respectively. The planes are spaced at 500 mm apart and the magnitude of the cam masses at B, C, and D are 9 kg, 5 kg, and 4 kg, respectively. If the shaft must be completely balanced, calculate the required mass of cam A.
(ii) A cam, with a minimum radius of 25 mm, rotating clockwise at a uniform speed is to be designed to give a roller follower made of 20mm diameter at the end of a valve rod, motion described below : 1. To raise the valve through 54 mm during 124° rotation of the cam by simple harmonic motion 2. To keep the valve fully raised through next 32° 3. To lower the valve during next 60° by uniform acceleration and retardation. Determine the maximum velocity and acceleration of the valve rod when the cam shaft rotates at 112 r.p.m and write the remaining dwell angle.
(Q1) flat faced reciprocating follower has the following motion:a) The follower moves out for 80° of cam rotation with uniformacceleration and retardation, the acceleration being twice theretardation.b) The follower dwells for the next 80° of cam rotation.c) It moves in for the next 120° of cam rotation with uniformacceleration and retardation, the retardation being twice theacceleration.d) The follower dwells for the remaining period.The base circle diameter of the cam is 60 mm and the stroke of thefollower is 20 mm. The line of movement of the follower passes throughthe cam centre.Draw the displacement diagram and the profile of the cam very neatlyshowing all constructional details.
A radial cam with a reciprocating follower is to be driven by a constant-speed motor at 150 rpm. The follower is to start from a dwell, accelerate to a uniform velocity of 25 in/s, maintain this velocity for 1.25 in of rise, decelerate to the top of the lift, return, and then dwell for 0.10 s. The total lift is to be 3.00 in. Determine the complete specifications of the displacement diagram.
An eccentric circular cam, which serves a similar function as the Scotch yoke mechanism in Problem 11.13, is used in conjunction with a flat face follower to control motion in pumps and in steam engine valves. Knowing that the eccentricity is denoted by e, the maximum range of the displacement of the follower is dmax, and the maximum velocity of the follower is vmax, determine the displacement, velocity, and acceleration of the follower.
A disc cam is to give uniform motion to a knife edge follower during out stroke of 50 mm during the first half of the cam revolution. The follower again returns to it's original position with uniform motion during the next half of the revolution. The minimum radius of the cam is 50 mm and the diameter of the cam shaft is 35 mm. 1.Draw the fully defined displacement diagram of the follower. 2.Draw the profile of the cam when the axis of the follower passes through the axis of the cam shaft.
Most gasoline engines in today's automobiles are belt driven. This means that the crankshaft, a rod which rotates and drives the pistons, is timed to the camshaft, the mechanism which actuates the valves, by means of a belt. Starting from rest, assume it takes t=0.0320s for a crankshaft with a radius of r1=3.25cm to reach 1750 rpm. If the belt does not stretch or slip, calculate the angular acceleration of crankshaft 2 of the larger camshaft, which has a radius of r2=6.50 cm, during this time period.
Shaft "a" in the figure rotates at 450 rev/min in the direction shown. Find the speed and direction of rotation of shaft "d".